linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Stanimir Varbanov" <svarbanov@mm-sol.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <swboyd@chromium.org>,
	"Johan Hovold" <johan+linaro@kernel.org>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>
Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: [PATCH v6 4/5] clk: qcom: gcc-sc7280: use new clk_regmap_pipe_src_ops for PCIe pipe clocks
Date: Fri, 13 May 2022 20:53:38 +0300	[thread overview]
Message-ID: <20220513175339.2981959-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220513175339.2981959-1-dmitry.baryshkov@linaro.org>

Use newly defined clk_regmap_pipe_src_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sc7280.c | 49 ++++++++++++++---------------------
 1 file changed, 19 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 423627d49719..05589ddefcde 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -17,6 +17,7 @@
 #include "clk-rcg.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "common.h"
 #include "gdsc.h"
 #include "reset.h"
@@ -255,26 +256,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
 	{ .hw = &gcc_gpll0_out_even.clkr.hw },
 };
 
-static const struct parent_map gcc_parent_map_6[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_6[] = {
-	{ .fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
-static const struct parent_map gcc_parent_map_7[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_7[] = {
-	{ .fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_8[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -369,32 +350,40 @@ static const struct clk_parent_data gcc_parent_data_15[] = {
 	{ .hw = &gcc_mss_gpll0_main_div_clk_src.clkr.hw },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x6b054,
 	.shift = 0,
 	.width = 2,
-	.parent_map = gcc_parent_map_6,
+	.phy_src_val = 0, /* pipe_clk */
+	.ref_src_val = 2, /* bi_tcxo */
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_6,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x8d054,
 	.shift = 0,
 	.width = 2,
-	.parent_map = gcc_parent_map_7,
+	.phy_src_val = 0, /* pipe_clk */
+	.ref_src_val = 2, /* bi_tcxo */
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_7,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_7),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
-- 
2.35.1


  parent reply	other threads:[~2022-05-13 17:53 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 17:53 [PATCH v6 0/5] PCI: qcom: Rework pipe_clk/pipe_clk_src handling Dmitry Baryshkov
2022-05-13 17:53 ` [PATCH v6 1/5] PCI: qcom: Remove unnecessary pipe_clk handling Dmitry Baryshkov
2022-05-18  7:42   ` Johan Hovold
2022-05-13 17:53 ` [PATCH v6 2/5] clk: qcom: regmap: add PHY clock source implementation Dmitry Baryshkov
2022-05-18  7:34   ` Johan Hovold
2022-05-18  7:48     ` Johan Hovold
2022-05-19 11:44       ` Dmitry Baryshkov
2022-05-18 17:58   ` Stephen Boyd
2022-05-18 19:19     ` Dmitry Baryshkov
2022-05-19 11:16     ` Dmitry Baryshkov
2022-05-20 22:49       ` Stephen Boyd
2022-05-21  0:38         ` Dmitry Baryshkov
2022-05-13 17:53 ` [PATCH v6 3/5] clk: qcom: gcc-sm8450: use new clk_regmap_pipe_src_ops for PCIe pipe clocks Dmitry Baryshkov
2022-05-18  7:36   ` Johan Hovold
2022-05-18 17:59   ` Stephen Boyd
2022-05-18 18:26     ` Dmitry Baryshkov
2022-05-18 18:31       ` Stephen Boyd
2022-05-13 17:53 ` Dmitry Baryshkov [this message]
2022-05-18  7:37   ` [PATCH v6 4/5] clk: qcom: gcc-sc7280: " Johan Hovold
2022-05-13 17:53 ` [PATCH v6 5/5] PCI: qcom: Drop manual pipe_clk_src handling Dmitry Baryshkov
2022-05-18  7:41   ` Johan Hovold
2022-05-18  7:53 ` [PATCH v6 0/5] PCI: qcom: Rework pipe_clk/pipe_clk_src handling Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220513175339.2981959-5-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=johan+linaro@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_pmaliset@quicinc.com \
    --cc=robh@kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).