From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Stephen Boyd" <swboyd@chromium.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Taniya Das" <quic_tdas@quicinc.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>
Cc: Johan Hovold <johan+linaro@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: [PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling
Date: Sat, 21 May 2022 03:53:35 +0300 [thread overview]
Message-ID: <20220521005343.1429642-1-dmitry.baryshkov@linaro.org> (raw)
PCIe pipe clk (and some other clocks) must be parked to the "safe"
source (bi_tcxo) when corresponding GDSC is turned off and on again.
Currently this is handcoded in the PCIe driver by reparenting the
gcc_pipe_N_clk_src clock.
Instead of doing it manually, follow the approach used by
clk_rcg2_shared_ops and implement this parking in the enable() and
disable() clock operations for respective pipe clocks.
Changes since v7:
- Brought back the struct clk_regmap_phy_mux (Johan)
- Fixed includes (Stephen)
Changes since v6:
- Switched the ops to use GENMASK/FIELD_GET/FIELD_PUT (Stephen),
- As all pipe/symbol clock source clocks have the same register (and
parents) layout, hardcode all the values. If the need arises, this
can be changed later (Stephen),
- Fixed commit messages and comments (suggested by Johan),
- Added revert for the clk_regmap_mux_safe that have been already
picked up by Bjorn.
Changes since v5:
- Rename the clock to clk-regmap-phy-mux and the enable/disable values
to phy_src_val and ref_src_val respectively (as recommended by
Johan).
Changes since v4:
- Renamed the clock to clk-regmap-pipe-src,
- Added mention of PCIe2 PHY to the commit message,
- Expanded commit messages to mention additional pipe clock details.
Changes since v3:
- Replaced the clock multiplexer implementation with branch-like clock.
Changes since v2:
- Added is_enabled() callback
- Added default parent to the pipe clock configuration
Changes since v1:
- Rebased on top of [1].
- Removed erroneous Fixes tag from the patch 4.
Changes since RFC:
- Rework clk-regmap-mux fields. Specify safe parent as P_* value rather
than specifying the register value directly
- Expand commit message to the first patch to specially mention that
it is required only on newer generations of Qualcomm chipsets.
Dmitry Baryshkov (6):
PCI: qcom: Remove unnecessary pipe_clk handling
clk: qcom: regmap: add PHY clock source implementation
clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
clocks
clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
clocks
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
PCI: qcom: Drop manual pipe_clk_src handling
Dmitry Baryshkov (8):
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for
PCIe pipe clocks"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for
PCIe pipe clocks"
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
clk: qcom: regmap: add PHY clock source implementation
clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
clocks
clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
clocks
PCI: qcom: Remove unnecessary pipe_clk handling
PCI: qcom: Drop manual pipe_clk_src handling
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-regmap-mux.c | 78 -------------------------
drivers/clk/qcom/clk-regmap-mux.h | 3 -
drivers/clk/qcom/clk-regmap-phy-mux.c | 62 ++++++++++++++++++++
drivers/clk/qcom/clk-regmap-phy-mux.h | 33 +++++++++++
drivers/clk/qcom/gcc-sc7280.c | 49 +++++-----------
drivers/clk/qcom/gcc-sm8450.c | 51 +++++-----------
drivers/pci/controller/dwc/pcie-qcom.c | 81 +-------------------------
8 files changed, 125 insertions(+), 233 deletions(-)
create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h
--
2.35.1
next reply other threads:[~2022-05-21 0:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-21 0:53 Dmitry Baryshkov [this message]
2022-05-21 0:53 ` [PATCH v7 1/8] Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 2/8] Revert "clk: qcom: gcc-sc7280: " Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 3/8] Revert "clk: qcom: regmap-mux: add pipe clk implementation" Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 4/8] clk: qcom: regmap: add PHY clock source implementation Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 5/8] clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 6/8] clk: qcom: gcc-sc7280: " Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 7/8] PCI: qcom: Remove unnecessary pipe_clk handling Dmitry Baryshkov
2022-05-21 0:53 ` [PATCH v7 8/8] PCI: qcom: Drop manual pipe_clk_src handling Dmitry Baryshkov
2022-05-23 8:56 ` Johan Hovold
2022-05-23 8:54 ` [PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling Johan Hovold
2022-05-23 17:56 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220521005343.1429642-1-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mturquette@baylibre.com \
--cc=quic_tdas@quicinc.com \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).