[PATCH v4 10/18] PCI: dwc: Convert Link-up status method to using dw_pcie_readl_dbi()

[Serge Semin <Sergey.Semin@baikalelectronics.ru>]

While the rest of the generic DWC PCIe code is using the dedicated IO-mem
accessors, the dw_pcie_link_up() method for some unobvious reason directly
calls readl() to get PortLogic.DEBUG1 register content. Since the way the
dbi-bus is accessed can be platform-specific let's replace the direct dbi
memory space read procedure with the readl-wrapper invocation. Thus we'll
have a slightly more generic dw_pcie_link_up() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index e5c30695f664..f9613835212b 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -548,7 +548,7 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 	if (pci->ops && pci->ops->link_up)
 		return pci->ops->link_up(pci);
 
-	val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
+	val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1);
 	return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
 		(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
 }
-- 
2.35.1