linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: "Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Krzysztof Wilczyński" <kw@linux.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Frank Li <Frank.Li@nxp.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 14/17] PCI: dwc: Introduce generic resources getter
Date: Fri, 10 Jun 2022 11:57:02 +0300	[thread overview]
Message-ID: <20220610085706.15741-15-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20220610085706.15741-1-Sergey.Semin@baikalelectronics.ru>

Currently the DW PCIe Root Port and Endpoint CSR spaces are retrieved in
the separate parts of the DW PCIe core driver. It doesn't really make
sense since the both controller types have identical set of the core CSR
regions: DBI, DBI CS2 and iATU/eDMA. Thus we can simplify the DW PCIe Host
and EP initialization methods by moving the platform-specific registers
space getting and mapping into a common method. It gets to be even more
justified seeing the CSRs base address pointers are preserved in the
common DW PCIe descriptor. Note all the OF-based common DW PCIe settings
initialization will be moved to the new method too in order to have a
single function for all the generic platform properties handling in single
place.

A nice side-effect of this change is that the pcie-designware-host.c and
pcie-designware-ep.c drivers are cleaned up from all the direct dw_pcie
storage modification, which makes the DW PCIe core, Root Port and Endpoint
modules more coherent.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v3:
- This is a new patch created on v3 lap of the series.
---
 .../pci/controller/dwc/pcie-designware-ep.c   | 26 +------
 .../pci/controller/dwc/pcie-designware-host.c | 15 +---
 drivers/pci/controller/dwc/pcie-designware.c  | 75 ++++++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.h  |  3 +
 4 files changed, 65 insertions(+), 54 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 441feff1917a..dd7ec1eb7520 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -13,8 +13,6 @@
 #include <linux/pci-epc.h>
 #include <linux/pci-epf.h>
 
-#include "../../pci.h"
-
 void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -680,29 +678,14 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 	struct device *dev = pci->dev;
 	struct platform_device *pdev = to_platform_device(dev);
-	struct device_node *np = dev->of_node;
 	const struct pci_epc_features *epc_features;
 	struct dw_pcie_ep_func *ep_func;
 
 	INIT_LIST_HEAD(&ep->func_list);
 
-	if (!pci->dbi_base) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
-		pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
-		if (IS_ERR(pci->dbi_base))
-			return PTR_ERR(pci->dbi_base);
-	}
-
-	if (!pci->dbi_base2) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2");
-		if (!res) {
-			pci->dbi_base2 = pci->dbi_base + SZ_4K;
-		} else {
-			pci->dbi_base2 = devm_pci_remap_cfg_resource(dev, res);
-			if (IS_ERR(pci->dbi_base2))
-				return PTR_ERR(pci->dbi_base2);
-		}
-	}
+	ret = dw_pcie_get_res(pci);
+	if (ret)
+		return ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
 	if (!res)
@@ -735,9 +718,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		return -ENOMEM;
 	ep->outbound_addr = addr;
 
-	if (pci->link_gen < 1)
-		pci->link_gen = of_pci_get_max_link_speed(np);
-
 	epc = devm_pci_epc_create(dev, &epc_ops);
 	if (IS_ERR(epc)) {
 		dev_err(dev, "Failed to create epc device\n");
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 56a678abe828..c941ea95badf 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -16,7 +16,6 @@
 #include <linux/pci_regs.h>
 #include <linux/platform_device.h>
 
-#include "../../pci.h"
 #include "pcie-designware.h"
 
 static struct pci_ops dw_pcie_ops;
@@ -298,6 +297,10 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 
 	raw_spin_lock_init(&pp->lock);
 
+	ret = dw_pcie_get_res(pci);
+	if (ret)
+		return ret;
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (res) {
 		pp->cfg0_size = resource_size(res);
@@ -311,13 +314,6 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		return -ENODEV;
 	}
 
-	if (!pci->dbi_base) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
-		pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
-		if (IS_ERR(pci->dbi_base))
-			return PTR_ERR(pci->dbi_base);
-	}
-
 	bridge = devm_pci_alloc_host_bridge(dev, 0);
 	if (!bridge)
 		return -ENOMEM;
@@ -332,9 +328,6 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->io_base = pci_pio_to_address(win->res->start);
 	}
 
-	if (pci->link_gen < 1)
-		pci->link_gen = of_pci_get_max_link_speed(np);
-
 	/* Set default bus ops */
 	bridge->ops = &dw_pcie_ops;
 	bridge->child_ops = &dw_child_pcie_ops;
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 479eafcdbcb7..747eb1ac5f3c 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -11,6 +11,7 @@
 #include <linux/align.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/ioport.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/sizes.h>
@@ -19,6 +20,59 @@
 #include "../../pci.h"
 #include "pcie-designware.h"
 
+int dw_pcie_get_res(struct dw_pcie *pci)
+{
+	struct platform_device *pdev = to_platform_device(pci->dev);
+	struct device_node *np = dev_of_node(pci->dev);
+	struct resource *res;
+
+	if (!pci->dbi_base) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+		pci->dbi_base = devm_pci_remap_cfg_resource(pci->dev, res);
+		if (IS_ERR(pci->dbi_base))
+			return PTR_ERR(pci->dbi_base);
+	}
+
+	/* DBI2 is mainly useful for the endpoint controller */
+	if (!pci->dbi_base2) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2");
+		if (res) {
+			pci->dbi_base2 = devm_pci_remap_cfg_resource(pci->dev, res);
+			if (IS_ERR(pci->dbi_base2))
+				return PTR_ERR(pci->dbi_base2);
+		} else {
+			pci->dbi_base2 = pci->dbi_base + SZ_4K;
+		}
+	}
+
+	/* For non-unrolled iATU/eDMA platforms this range will be ignored */
+	if (!pci->atu_base) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu");
+		if (res) {
+			pci->atu_size = resource_size(res);
+			pci->atu_base = devm_ioremap_resource(pci->dev, res);
+			if (IS_ERR(pci->atu_base))
+				return PTR_ERR(pci->atu_base);
+		} else {
+			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+		}
+	}
+
+	/* Set a default value suitable for at most 8 in and 8 out windows */
+	if (!pci->atu_size)
+		pci->atu_size = SZ_4K;
+
+	if (pci->link_gen < 1)
+		pci->link_gen = of_pci_get_max_link_speed(np);
+
+	of_property_read_u32(np, "num-lanes", &pci->num_lanes);
+
+	if (of_property_read_bool(np, "snps,enable-cdm-check"))
+		dw_pcie_cap_set(pci, CDM_CHECK);
+
+	return 0;
+}
+
 void dw_pcie_version_detect(struct dw_pcie *pci)
 {
 	u32 ver;
@@ -642,25 +696,8 @@ static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci)
 
 void dw_pcie_iatu_detect(struct dw_pcie *pci)
 {
-	struct platform_device *pdev = to_platform_device(pci->dev);
-
 	if (dw_pcie_iatu_unroll_enabled(pci)) {
 		dw_pcie_cap_set(pci, IATU_UNROLL);
-
-		if (!pci->atu_base) {
-			struct resource *res =
-				platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu");
-			if (res) {
-				pci->atu_size = resource_size(res);
-				pci->atu_base = devm_ioremap_resource(pci->dev, res);
-			}
-			if (!pci->atu_base || IS_ERR(pci->atu_base))
-				pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
-		}
-
-		if (!pci->atu_size)
-			/* Pick a minimal default, enough for 8 in and 8 out windows */
-			pci->atu_size = SZ_4K;
 	} else {
 		pci->atu_base = pci->dbi_base + PCIE_ATU_VIEWPORT_BASE;
 		pci->atu_size = PCIE_ATU_VIEWPORT_SIZE;
@@ -678,7 +715,6 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
 
 void dw_pcie_setup(struct dw_pcie *pci)
 {
-	struct device_node *np = pci->dev->of_node;
 	u32 val;
 
 	if (pci->link_gen > 0)
@@ -706,14 +742,13 @@ void dw_pcie_setup(struct dw_pcie *pci)
 	val |= PORT_LINK_DLL_LINK_EN;
 	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
 
-	if (of_property_read_bool(np, "snps,enable-cdm-check")) {
+	if (dw_pcie_cap_is(pci, CDM_CHECK)) {
 		val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
 		val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
 		       PCIE_PL_CHK_REG_CHK_REG_START;
 		dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
 	}
 
-	of_property_read_u32(np, "num-lanes", &pci->num_lanes);
 	if (!pci->num_lanes) {
 		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
 		return;
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index e3b839ec0ccf..59ebcf880d0d 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -46,6 +46,7 @@
 
 /* DWC PCIe controller capabilities */
 #define DW_PCIE_CAP_IATU_UNROLL		1
+#define DW_PCIE_CAP_CDM_CHECK		2
 
 #define dw_pcie_cap_is(_pci, _cap) \
 	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
@@ -300,6 +301,8 @@ struct dw_pcie {
 #define to_dw_pcie_from_ep(endpoint)   \
 		container_of((endpoint), struct dw_pcie, ep)
 
+int dw_pcie_get_res(struct dw_pcie *pci);
+
 void dw_pcie_version_detect(struct dw_pcie *pci);
 
 u8 dw_pcie_find_capability(struct dw_pcie *pci, u8 cap);
-- 
2.35.1


  parent reply	other threads:[~2022-06-10  9:06 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-10  8:56 [PATCH v3 00/17] PCI: dwc: Add generic resources and Baikal-T1 support Serge Semin
2022-06-10  8:56 ` [PATCH v3 01/17] dt-bindings: PCI: dwc: Detach common RP/EP DT bindings Serge Semin
2022-06-10  8:56 ` [PATCH v3 02/17] dt-bindings: PCI: dwc: Remove bus node from the examples Serge Semin
2022-06-15 16:30   ` Rob Herring
2022-06-10  8:56 ` [PATCH v3 03/17] dt-bindings: PCI: dwc: Add phys/phy-names common properties Serge Semin
2022-06-10  8:56 ` [PATCH v3 04/17] dt-bindings: PCI: dwc: Add max-link-speed common property Serge Semin
2022-06-15 14:55   ` Rob Herring
2022-06-19 14:27     ` Serge Semin
2022-06-28 12:15       ` Serge Semin
2022-06-28 14:56         ` Rob Herring
2022-06-29  1:50           ` Serge Semin
2022-07-01 14:44       ` Rob Herring
2022-07-07 19:02         ` Serge Semin
2022-06-10  8:56 ` [PATCH v3 05/17] dt-bindings: PCI: dwc: Stop selecting generic bindings by default Serge Semin
2022-06-10  8:56 ` [PATCH v3 06/17] dt-bindings: PCI: dwc: Add max-functions EP property Serge Semin
2022-06-15 16:31   ` Rob Herring
2022-06-10  8:56 ` [PATCH v3 07/17] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties Serge Semin
2022-06-15 15:32   ` Rob Herring
2022-06-19 16:37     ` Serge Semin
2022-06-28 12:18       ` Serge Semin
2022-07-07 19:25       ` Serge Semin
2022-06-10  8:56 ` [PATCH v3 08/17] dt-bindings: PCI: dwc: Add reg/reg-names " Serge Semin
2022-06-10  8:56 ` [PATCH v3 09/17] dt-bindings: PCI: dwc: Add clocks/resets " Serge Semin
2022-06-10  8:56 ` [PATCH v3 10/17] dt-bindings: PCI: dwc: Add dma-coherent property Serge Semin
2022-06-10  8:56 ` [PATCH v3 11/17] dt-bindings: PCI: dwc: Apply common schema to Rockchip DW PCIe nodes Serge Semin
2022-06-10 13:12   ` Rob Herring
2022-06-10 21:13     ` Serge Semin
2022-06-10  8:57 ` [PATCH v3 12/17] dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings Serge Semin
2022-06-15 16:37   ` Rob Herring
2022-06-19 20:03     ` Serge Semin
2022-06-28 12:19       ` Serge Semin
2022-07-01 14:59       ` Rob Herring
2022-07-07 19:19         ` Serge Semin
2022-06-10  8:57 ` [PATCH v3 13/17] PCI: dwc: Introduce generic controller capabilities interface Serge Semin
2022-06-15 16:42   ` Rob Herring
2022-06-10  8:57 ` Serge Semin [this message]
2022-06-15 16:46   ` [PATCH v3 14/17] PCI: dwc: Introduce generic resources getter Rob Herring
2022-06-10  8:57 ` [PATCH v3 15/17] PCI: dwc: Combine iATU detection procedures Serge Semin
2022-06-15 16:47   ` Rob Herring
2022-06-10  8:57 ` [PATCH v3 16/17] PCI: dwc: Introduce generic platform clocks and resets Serge Semin
2022-06-10  8:57 ` [PATCH v3 17/17] PCI: dwc: Add Baikal-T1 PCIe controller support Serge Semin
2022-06-15 16:48   ` Bjorn Helgaas
2022-06-20 17:13     ` Serge Semin
2022-06-21 18:29       ` Bjorn Helgaas
2022-06-22 17:04         ` Serge Semin
2022-06-28 12:23           ` Serge Semin
2022-06-28 15:17             ` Bjorn Helgaas
2022-06-15 17:10   ` Rob Herring
2022-06-19 20:39     ` Serge Semin
2022-07-12 20:29       ` Rob Herring
2022-07-12 20:58         ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220610085706.15741-15-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).