linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: "Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rahul Tanwar" <rtanwar@maxlinear.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Frank Li <Frank.Li@nxp.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH RESEND v4 14/15] PCI: dwc: Check iATU in/outbound ranges setup methods status
Date: Fri, 24 Jun 2022 17:39:46 +0300	[thread overview]
Message-ID: <20220624143947.8991-15-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20220624143947.8991-1-Sergey.Semin@baikalelectronics.ru>

Let's make the DWC PCIe RC/EP safer and more verbose for the invalid or
failed inbound and outbound iATU windows setups. Needless to say that
silently ignoring iATU regions setup errors may cause unpredictable
errors. For instance if for some reason a cfg or IO window fails to be
activated, then any CFG/IO requested won't reach target PCIe devices and
the corresponding accessors will return platform-specific random values.

First of all we need to convert dw_pcie_ep_outbound_atu() method to check
whether the specified outbound iATU range is successfully setup. That
method is called by the pci_epc_ops.map_addr callback. Thus we'll make the
EP-specific CPU->PCIe memory mappings saver.

Secondly since the iATU outbound range programming method now returns the
operation status, it will be handy to take that status into account in the
pci_ops.{map_bus,read,write} methods. Thus any failed mapping will be
immediately noticeable by the PCIe CFG operations requesters.

Finally we need to convert the dw_pcie_setup_rc() method to returning the
operation status, since the iATU outbound ranges setup procedure may now
fail. It will be especially handy in case if the DW PCIe RC DT-node has
invalid/unsupported (dma-)ranges property. Note since the suggested
modification causes having too wide code indentation, it is reasonable
from maintainability and readability points of view to move the outbound
ranges setup procedure in the separate function.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../pci/controller/dwc/pcie-designware-ep.c   |   9 +-
 .../pci/controller/dwc/pcie-designware-host.c | 153 ++++++++++++------
 drivers/pci/controller/dwc/pcie-designware.h  |   5 +-
 drivers/pci/controller/dwc/pcie-intel-gw.c    |   6 +-
 4 files changed, 114 insertions(+), 59 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 2e91222f7c98..627c4b69878c 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -184,8 +184,9 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
 				   phys_addr_t phys_addr,
 				   u64 pci_addr, size_t size)
 {
-	u32 free_win;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 free_win;
+	int ret;
 
 	free_win = find_first_zero_bit(ep->ob_window_map, pci->num_ob_windows);
 	if (free_win >= pci->num_ob_windows) {
@@ -193,8 +194,10 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
 		return -EINVAL;
 	}
 
-	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
-				     phys_addr, pci_addr, size);
+	ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
+					   phys_addr, pci_addr, size);
+	if (ret)
+		return ret;
 
 	set_bit(free_win, ep->ob_window_map);
 	ep->outbound_addr[free_win] = phys_addr;
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index e0a2819608c6..6993ce9e856d 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -412,7 +412,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 
 	dw_pcie_iatu_detect(pci);
 
-	dw_pcie_setup_rc(pp);
+	ret = dw_pcie_setup_rc(pp);
+	if (ret)
+		goto err_free_msi;
 
 	if (!dw_pcie_link_up(pci)) {
 		ret = dw_pcie_start_link(pci);
@@ -466,10 +468,10 @@ EXPORT_SYMBOL_GPL(dw_pcie_host_deinit);
 static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 						unsigned int devfn, int where)
 {
-	int type;
-	u32 busdev;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int type, ret;
+	u32 busdev;
 
 	/*
 	 * Checking whether the link is up here is a last line of defense
@@ -490,8 +492,10 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 	else
 		type = PCIE_ATU_TYPE_CFG1;
 
-
-	dw_pcie_prog_outbound_atu(pci, 0, type, pp->cfg0_base, busdev, pp->cfg0_size);
+	ret = dw_pcie_prog_outbound_atu(pci, 0, type, pp->cfg0_base, busdev,
+					pp->cfg0_size);
+	if (ret)
+		return NULL;
 
 	return pp->va_cfg0_base + where;
 }
@@ -499,33 +503,45 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 static int dw_pcie_rd_other_conf(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 *val)
 {
-	int ret;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret;
 
 	ret = pci_generic_config_read(bus, devfn, where, size, val);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
 
-	if (!ret && pp->cfg0_io_shared)
-		dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO, pp->io_base,
-					  pp->io_bus_addr, pp->io_size);
+	if (pp->cfg0_io_shared) {
+		ret = dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO,
+						pp->io_base, pp->io_bus_addr,
+						pp->io_size);
+		if (ret)
+			return PCIBIOS_SET_FAILED;
+	}
 
-	return ret;
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static int dw_pcie_wr_other_conf(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 val)
 {
-	int ret;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret;
 
 	ret = pci_generic_config_write(bus, devfn, where, size, val);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
 
-	if (!ret && pp->cfg0_io_shared)
-		dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO, pp->io_base,
-					  pp->io_bus_addr, pp->io_size);
+	if (pp->cfg0_io_shared) {
+		ret = dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO,
+						pp->io_base, pp->io_bus_addr,
+						pp->io_size);
+		if (ret)
+			return PCIBIOS_SET_FAILED;
+	}
 
-	return ret;
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static struct pci_ops dw_child_pcie_ops = {
@@ -552,10 +568,72 @@ static struct pci_ops dw_pcie_ops = {
 	.write = pci_generic_config_write,
 };
 
-void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
+static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 {
-	u32 val, ctrl, num_ctrls;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct resource_entry *entry;
+	int i, ret;
+
+	/* Note the very first outbound ATU is used for CFG IOs */
+	if (!pci->num_ob_windows) {
+		dev_err(pci->dev, "No outbound iATU found\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Ensure all outbound windows are disabled before proceeding with
+	 * the MEM/IO ranges setups.
+	 */
+	for (i = 0; i < pci->num_ob_windows; i++)
+		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
+
+	i = 0;
+	resource_list_for_each_entry(entry, &pp->bridge->windows) {
+		if (resource_type(entry->res) != IORESOURCE_MEM)
+			continue;
+
+		if (pci->num_ob_windows <= ++i)
+			break;
+
+		ret = dw_pcie_prog_outbound_atu(pci, i, PCIE_ATU_TYPE_MEM,
+						entry->res->start,
+						entry->res->start - entry->offset,
+						resource_size(entry->res));
+		if (ret) {
+			dev_err(pci->dev, "Failed to set MEM range %pr\n",
+				entry->res);
+			return ret;
+		}
+	}
+
+	if (pp->io_size) {
+		if (pci->num_ob_windows > ++i) {
+			ret = dw_pcie_prog_outbound_atu(pci, i, PCIE_ATU_TYPE_IO,
+							pp->io_base,
+							pp->io_bus_addr,
+							pp->io_size);
+			if (ret) {
+				dev_err(pci->dev, "Failed to set IO range %pr\n",
+					entry->res);
+				return ret;
+			}
+		} else {
+			pp->cfg0_io_shared = true;
+		}
+	}
+
+	if (pci->num_ob_windows <= i)
+		dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
+			 pci->num_ob_windows);
+
+	return 0;
+}
+
+int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u32 val, ctrl, num_ctrls;
+	int ret;
 
 	/*
 	 * Enable DBI read-only registers for writing/updating configuration.
@@ -610,42 +688,9 @@ void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 	 * ATU, so we should not program the ATU here.
 	 */
 	if (pp->bridge->child_ops == &dw_child_pcie_ops) {
-		int i, atu_idx = 0;
-		struct resource_entry *entry;
-
-		/*
-		 * Ensure all outbound windows are disabled so there are
-		 * multiple matches
-		 */
-		for (i = 0; i < pci->num_ob_windows; i++)
-			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
-
-		/* Get last memory resource entry */
-		resource_list_for_each_entry(entry, &pp->bridge->windows) {
-			if (resource_type(entry->res) != IORESOURCE_MEM)
-				continue;
-
-			if (pci->num_ob_windows <= ++atu_idx)
-				break;
-
-			dw_pcie_prog_outbound_atu(pci, atu_idx,
-						  PCIE_ATU_TYPE_MEM, entry->res->start,
-						  entry->res->start - entry->offset,
-						  resource_size(entry->res));
-		}
-
-		if (pp->io_size) {
-			if (pci->num_ob_windows > ++atu_idx)
-				dw_pcie_prog_outbound_atu(pci, atu_idx,
-							  PCIE_ATU_TYPE_IO, pp->io_base,
-							  pp->io_bus_addr, pp->io_size);
-			else
-				pp->cfg0_io_shared = true;
-		}
-
-		if (pci->num_ob_windows <= atu_idx)
-			dev_warn(dev, "Resources exceed number of ATU entries (%d)\n",
-				 pci->num_ob_windows);
+		ret = dw_pcie_iatu_setup(pp);
+		if (ret)
+			return ret;
 	}
 
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
@@ -658,5 +703,7 @@ void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
 
 	dw_pcie_dbi_ro_wr_dis(pci);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(dw_pcie_setup_rc);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 60f1ddc54933..c3e73ed9aff5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -387,7 +387,7 @@ static inline void dw_pcie_stop_link(struct dw_pcie *pci)
 
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct dw_pcie_rp *pp);
-void dw_pcie_setup_rc(struct dw_pcie_rp *pp);
+int dw_pcie_setup_rc(struct dw_pcie_rp *pp);
 int dw_pcie_host_init(struct dw_pcie_rp *pp);
 void dw_pcie_host_deinit(struct dw_pcie_rp *pp);
 int dw_pcie_allocate_domains(struct dw_pcie_rp *pp);
@@ -399,8 +399,9 @@ static inline irqreturn_t dw_handle_msi_irq(struct dw_pcie_rp *pp)
 	return IRQ_NONE;
 }
 
-static inline void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
+static inline int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 {
+	return 0;
 }
 
 static inline int dw_pcie_host_init(struct dw_pcie_rp *pp)
diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
index a44f685ec94d..c3481200e86a 100644
--- a/drivers/pci/controller/dwc/pcie-intel-gw.c
+++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
@@ -302,7 +302,11 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 	intel_pcie_ltssm_disable(pcie);
 	intel_pcie_link_setup(pcie);
 	intel_pcie_init_n_fts(pci);
-	dw_pcie_setup_rc(&pci->pp);
+
+	ret = dw_pcie_setup_rc(&pci->pp);
+	if (ret)
+		goto app_init_err;
+
 	dw_pcie_upconfig_setup(pci);
 
 	intel_pcie_device_rst_deassert(pcie);
-- 
2.35.1


  parent reply	other threads:[~2022-06-24 14:40 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24 14:39 [PATCH RESEND v4 00/15] PCI: dwc: Add hw version and dma-ranges support Serge Semin
2022-06-24 14:39 ` [PATCH RESEND v4 01/15] PCI: dwc: Add more verbose link-up message Serge Semin
2022-08-01 12:59   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 02/15] PCI: dwc: Detect iATU settings after getting "addr_space" resource Serge Semin
2022-07-28 14:38   ` Bjorn Helgaas
2022-08-01 13:01   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 03/15] PCI: dwc: Convert to using native IP-core versions representation Serge Semin
2022-07-28 15:24   ` Bjorn Helgaas
2022-07-28 15:31     ` Ben Dooks
2022-07-28 16:34       ` Bjorn Helgaas
2022-07-28 18:53     ` Serge Semin
2022-08-01 13:07   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 04/15] PCI: dwc: Add IP-core version detection procedure Serge Semin
2022-08-01 13:12   ` Manivannan Sadhasivam
2022-08-01 20:06     ` Bjorn Helgaas
2022-08-02  7:31       ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 05/15] PCI: dwc: Introduce Synopsys IP-core versions/types interface Serge Semin
2022-08-01 13:21   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 06/15] PCI: intel-gw: Drop manual DW PCIe controller version setup Serge Semin
2022-08-01 13:28   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 07/15] PCI: tegra194: " Serge Semin
2022-06-27  7:59   ` Vidya Sagar
2022-06-27 22:31     ` Serge Semin
2022-08-01 13:29   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 08/15] PCI: dwc: Add host de-initialization callback Serge Semin
2022-08-01 13:33   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 09/15] PCI: dwc: Drop inbound iATU types enumeration - dw_pcie_as_type Serge Semin
2022-08-01 13:36   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 10/15] PCI: dwc: Drop iATU regions enumeration - dw_pcie_region_type Serge Semin
2022-08-01 13:37   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 11/15] PCI: dwc: Simplify in/outbound iATU setup methods Serge Semin
2022-08-01 13:50   ` Manivannan Sadhasivam
2022-08-01 20:11     ` Bjorn Helgaas
2022-06-24 14:39 ` [PATCH RESEND v4 12/15] PCI: dwc: Add iATU regions size detection procedure Serge Semin
2022-08-01 13:52   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 13/15] PCI: dwc: Verify in/out regions against iATU constraints Serge Semin
2022-08-01 13:53   ` Manivannan Sadhasivam
2022-06-24 14:39 ` Serge Semin [this message]
2022-08-01 13:54   ` [PATCH RESEND v4 14/15] PCI: dwc: Check iATU in/outbound ranges setup methods status Manivannan Sadhasivam
2022-08-01 20:17     ` Bjorn Helgaas
2022-06-24 14:39 ` [PATCH RESEND v4 15/15] PCI: dwc: Introduce dma-ranges property support for RC-host Serge Semin
2022-07-28 22:11   ` Bjorn Helgaas
2022-07-29  4:52     ` Serge Semin
2022-07-29 11:33       ` Bjorn Helgaas
2022-07-29 14:38         ` Serge Semin
2022-08-01 14:00   ` Manivannan Sadhasivam
2022-08-09 20:07     ` Serge Semin
2022-07-11 18:48 ` [PATCH RESEND v4 00/15] PCI: dwc: Add hw version and dma-ranges support Serge Semin
2022-07-27 22:49 ` Bjorn Helgaas
2022-07-28 12:21   ` Serge Semin
2022-07-29  2:36 ` Bjorn Helgaas
2022-09-28  8:10   ` Lorenzo Pieralisi
2022-09-28 10:53     ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220624143947.8991-15-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=rtanwar@maxlinear.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).