From: Niklas Cassel <cassel@kernel.org>
To: "Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Arnd Bergmann" <arnd@arndb.de>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: Damien Le Moal <dlemoal@kernel.org>,
Niklas Cassel <cassel@kernel.org>,
linux-pci@vger.kernel.org
Subject: [PATCH] misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests
Date: Mon, 18 Mar 2024 20:30:19 +0100 [thread overview]
Message-ID: <20240318193019.123795-1-cassel@kernel.org> (raw)
The current code uses writel()/readl(), which has an implicit memory
barrier for every single readl()/writel().
Additionally, reading 4 bytes at a time over the PCI bus is not really
optimal, considering that this code is running in an ioctl handler.
Use memcpy_toio()/memcpy_fromio() for BAR tests.
Before patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 1.56s
After patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 0.54s
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
drivers/misc/pci_endpoint_test.c | 52 ++++++++++++++++++++++++--------
1 file changed, 40 insertions(+), 12 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 705029ad8eb5..cb6c9ccf3a5f 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -272,31 +272,59 @@ static const u32 bar_test_pattern[] = {
0xA5A5A5A5,
};
+static int pci_endpoint_test_bar_memcmp(struct pci_endpoint_test *test,
+ enum pci_barno barno, int offset,
+ void *write_buf, void *read_buf,
+ int size)
+{
+ memset(write_buf, bar_test_pattern[barno], size);
+ memcpy_toio(test->bar[barno] + offset, write_buf, size);
+
+ /* Make sure that reads are performed after writes. */
+ mb();
+ memcpy_fromio(read_buf, test->bar[barno] + offset, size);
+
+ return memcmp(write_buf, read_buf, size);
+}
+
static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
enum pci_barno barno)
{
- int j;
- u32 val;
- int size;
+ int j, bar_size, buf_size, iters, remain;
+ void *write_buf;
+ void *read_buf;
struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
if (!test->bar[barno])
return false;
- size = pci_resource_len(pdev, barno);
+ bar_size = pci_resource_len(pdev, barno);
if (barno == test->test_reg_bar)
- size = 0x4;
+ bar_size = 0x4;
- for (j = 0; j < size; j += 4)
- pci_endpoint_test_bar_writel(test, barno, j,
- bar_test_pattern[barno]);
+ buf_size = min(SZ_1M, bar_size);
- for (j = 0; j < size; j += 4) {
- val = pci_endpoint_test_bar_readl(test, barno, j);
- if (val != bar_test_pattern[barno])
+ write_buf = kmalloc(buf_size, GFP_KERNEL);
+ if (!write_buf)
+ return false;
+
+ read_buf = kmalloc(buf_size, GFP_KERNEL);
+ if (!read_buf)
+ return false;
+
+ iters = bar_size / buf_size;
+ for (j = 0; j < iters; j++)
+ if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * j,
+ write_buf, read_buf, buf_size))
+ return false;
+
+ remain = bar_size % buf_size;
+ if (remain)
+ if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * iters,
+ write_buf, read_buf, remain))
return false;
- }
return true;
}
--
2.44.0
next reply other threads:[~2024-03-18 19:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-18 19:30 Niklas Cassel [this message]
2024-03-18 20:02 ` [PATCH] misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests Arnd Bergmann
2024-03-19 4:31 ` Manivannan Sadhasivam
2024-03-19 6:41 ` Arnd Bergmann
2024-03-19 16:40 ` Niklas Cassel
2024-03-19 16:48 ` Manivannan Sadhasivam
2024-03-19 16:53 ` Niklas Cassel
2024-03-19 19:55 ` Arnd Bergmann
2024-03-19 21:36 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240318193019.123795-1-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=arnd@arndb.de \
--cc=dlemoal@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).