From: Niklas Cassel <cassel@kernel.org>
To: "Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Arnd Bergmann" <arnd@arndb.de>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com>,
Damien Le Moal <dlemoal@kernel.org>,
Niklas Cassel <cassel@kernel.org>,
linux-pci@vger.kernel.org
Subject: [PATCH v3] misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests
Date: Wed, 20 Mar 2024 10:01:05 +0100 [thread overview]
Message-ID: <20240320090106.310955-1-cassel@kernel.org> (raw)
The current code uses writel()/readl(), which has an implicit memory
barrier for every single readl()/writel().
Additionally, reading 4 bytes at a time over the PCI bus is not really
optimal, considering that this code is running in an ioctl handler.
Use memcpy_toio()/memcpy_fromio() for BAR tests.
Before patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 1.56s
After patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 0.54s
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
Changes since v2:
-Actually free the allocated memory... (thank you Kuppuswamy)
drivers/misc/pci_endpoint_test.c | 68 ++++++++++++++++++++++++++------
1 file changed, 55 insertions(+), 13 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 705029ad8eb5..1d361589fb61 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -272,33 +272,75 @@ static const u32 bar_test_pattern[] = {
0xA5A5A5A5,
};
+static int pci_endpoint_test_bar_memcmp(struct pci_endpoint_test *test,
+ enum pci_barno barno, int offset,
+ void *write_buf, void *read_buf,
+ int size)
+{
+ memset(write_buf, bar_test_pattern[barno], size);
+ memcpy_toio(test->bar[barno] + offset, write_buf, size);
+
+ memcpy_fromio(read_buf, test->bar[barno] + offset, size);
+
+ return memcmp(write_buf, read_buf, size);
+}
+
static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
enum pci_barno barno)
{
- int j;
- u32 val;
- int size;
+ int j, bar_size, buf_size, iters, remain;
+ void *write_buf;
+ void *read_buf;
struct pci_dev *pdev = test->pdev;
+ bool ret;
if (!test->bar[barno])
return false;
- size = pci_resource_len(pdev, barno);
+ bar_size = pci_resource_len(pdev, barno);
if (barno == test->test_reg_bar)
- size = 0x4;
+ bar_size = 0x4;
- for (j = 0; j < size; j += 4)
- pci_endpoint_test_bar_writel(test, barno, j,
- bar_test_pattern[barno]);
+ buf_size = min(SZ_1M, bar_size);
- for (j = 0; j < size; j += 4) {
- val = pci_endpoint_test_bar_readl(test, barno, j);
- if (val != bar_test_pattern[barno])
- return false;
+ write_buf = kmalloc(buf_size, GFP_KERNEL);
+ if (!write_buf)
+ return false;
+
+ read_buf = kmalloc(buf_size, GFP_KERNEL);
+ if (!read_buf) {
+ ret = false;
+ goto err;
}
- return true;
+ iters = bar_size / buf_size;
+ for (j = 0; j < iters; j++) {
+ if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * j,
+ write_buf, read_buf,
+ buf_size)) {
+ ret = false;
+ goto err;
+ }
+ }
+
+ remain = bar_size % buf_size;
+ if (remain) {
+ if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * iters,
+ write_buf, read_buf,
+ remain)) {
+ ret = false;
+ goto err;
+ }
+ }
+
+ ret = true;
+
+err:
+ kfree(write_buf);
+ kfree(read_buf);
+
+ return ret;
}
static bool pci_endpoint_test_intx_irq(struct pci_endpoint_test *test)
--
2.44.0
next reply other threads:[~2024-03-20 9:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-20 9:01 Niklas Cassel [this message]
2024-03-20 15:53 ` [PATCH v3] misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests Kuppuswamy Sathyanarayanan
2024-03-21 8:45 ` Niklas Cassel
2024-03-21 18:16 ` Kuppuswamy Sathyanarayanan
2024-03-22 10:20 ` Manivannan Sadhasivam
2024-03-22 10:29 ` Niklas Cassel
2024-03-22 14:45 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240320090106.310955-1-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=arnd@arndb.de \
--cc=dlemoal@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).