[PATCH v6 15/16] Bluetooth: qca: use the power sequencer for QCA6390

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Use the pwrseq subsystem's consumer API to run the power-up sequence for
the Bluetooth module of the QCA6390 package.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 74 +++++++++++++++++++++++++++++--------
 1 file changed, 59 insertions(+), 15 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 8a60ad7acd70..d31dcea650c1 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
+#include <linux/pwrseq/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <linux/serdev.h>
 #include <linux/mutex.h>
@@ -215,6 +216,7 @@ struct qca_power {
 	struct regulator_bulk_data *vreg_bulk;
 	int num_vregs;
 	bool vregs_on;
+	struct pwrseq_desc *pwrseq;
 };
 
 struct qca_serdev {
@@ -1682,6 +1684,27 @@ static bool qca_wakeup(struct hci_dev *hdev)
 	return wakeup;
 }
 
+static int qca_port_reopen(struct hci_uart *hu)
+{
+	int ret;
+
+	/* Now the device is in ready state to communicate with host.
+	 * To sync host with device we need to reopen port.
+	 * Without this, we will have RTS and CTS synchronization
+	 * issues.
+	 */
+	serdev_device_close(hu->serdev);
+	ret = serdev_device_open(hu->serdev);
+	if (ret) {
+		bt_dev_err(hu->hdev, "failed to open port");
+		return ret;
+	}
+
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
 static int qca_regulator_init(struct hci_uart *hu)
 {
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
@@ -1750,21 +1773,7 @@ static int qca_regulator_init(struct hci_uart *hu)
 		break;
 	}
 
-	/* Now the device is in ready state to communicate with host.
-	 * To sync host with device we need to reopen port.
-	 * Without this, we will have RTS and CTS synchronization
-	 * issues.
-	 */
-	serdev_device_close(hu->serdev);
-	ret = serdev_device_open(hu->serdev);
-	if (ret) {
-		bt_dev_err(hu->hdev, "failed to open port");
-		return ret;
-	}
-
-	hci_uart_set_flow_control(hu, false);
-
-	return 0;
+	return qca_port_reopen(hu);
 }
 
 static int qca_power_on(struct hci_dev *hdev)
@@ -1792,6 +1801,17 @@ static int qca_power_on(struct hci_dev *hdev)
 		ret = qca_regulator_init(hu);
 		break;
 
+	case QCA_QCA6390:
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		ret = pwrseq_power_on(qcadev->bt_power->pwrseq);
+		if (ret)
+			return ret;
+
+		ret = qca_port_reopen(hu);
+		if (ret)
+			return ret;
+		break;
+
 	default:
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 		if (qcadev->bt_en) {
@@ -2170,6 +2190,10 @@ static void qca_power_shutdown(struct hci_uart *hu)
 		}
 		break;
 
+	case QCA_QCA6390:
+		pwrseq_power_off(qcadev->bt_power->pwrseq);
+		break;
+
 	default:
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 	}
@@ -2308,12 +2332,25 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	case QCA_WCN6750:
 	case QCA_WCN6855:
 	case QCA_WCN7850:
+	case QCA_QCA6390:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
 		if (!qcadev->bt_power)
 			return -ENOMEM;
+		break;
+	default:
+		break;
+	}
 
+	switch (qcadev->btsoc_type) {
+	case QCA_WCN3988:
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
+	case QCA_WCN7850:
 		qcadev->bt_power->dev = &serdev->dev;
 		err = qca_init_regulators(qcadev->bt_power, data->vregs,
 					  data->num_vregs);
@@ -2354,6 +2391,13 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		}
 		break;
 
+	case QCA_QCA6390:
+		qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->dev,
+							   "bluetooth");
+		if (IS_ERR(qcadev->bt_power->pwrseq))
+			return PTR_ERR(qcadev->bt_power->pwrseq);
+		fallthrough;
+
 	default:
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-- 
2.40.1