Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Sean V Kelley" <sean.v.kelley@intel.com>
To: "Bjorn Helgaas" <helgaas@kernel.org>
Cc: "Sean V Kelley" <seanvk.dev@oregontracks.org>,
	Jonathan.Cameron@huawei.com, bhelgaas@google.com,
	rafael.j.wysocki@intel.com, ashok.raj@intel.com,
	tony.luck@intel.com, sathyanarayanan.kuppuswamy@intel.com,
	qiuxu.zhuo@intel.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v9 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
Date: Sat, 17 Oct 2020 09:14:40 -0700
Message-ID: <2219B080-CB26-4FE3-96BD-6C489BAAEE8C@intel.com> (raw)
In-Reply-To: <20201016203037.GA90074@bjorn-Precision-5520>

On 16 Oct 2020, at 13:30, Bjorn Helgaas wrote:

> [+to Jonathan]
>
> On Thu, Oct 15, 2020 at 05:11:10PM -0700, Sean V Kelley wrote:
>> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>
>> When attempting error recovery for an RCiEP associated with an RCEC 
>> device,
>> there needs to be a way to update the Root Error Status, the 
>> Uncorrectable
>> Error Status and the Uncorrectable Error Severity of the parent RCEC. 
>>  In
>> some non-native cases in which there is no OS-visible device 
>> associated
>> with the RCiEP, there is nothing to act upon as the firmware is 
>> acting
>> before the OS.
>>
>> Add handling for the linked RCEC in AER/ERR while taking into account
>> non-native cases.
>>
>> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
>> Link: 
>> https://lore.kernel.org/r/20201002184735.1229220-12-seanvk.dev@oregontracks.org
>> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
>> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> ---
>>  drivers/pci/pcie/aer.c | 53 
>> ++++++++++++++++++++++++++++++------------
>>  drivers/pci/pcie/err.c | 20 ++++++++--------
>>  2 files changed, 48 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>> index 65dff5f3457a..083f69b67bfd 100644
>> --- a/drivers/pci/pcie/aer.c
>> +++ b/drivers/pci/pcie/aer.c
>> @@ -1357,27 +1357,50 @@ static int aer_probe(struct pcie_device *dev)
>>   */
>>  static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>>  {
>> -	int aer = dev->aer_cap;
>> +	int type = pci_pcie_type(dev);
>> +	struct pci_dev *root;
>> +	int aer = 0;
>> +	int rc = 0;
>>  	u32 reg32;
>> -	int rc;
>>
>> +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)
>
> "type == PCI_EXP_TYPE_RC_END"

Right, I merged your suggested changes which added the type. Will 
correct.

>
>> +		/*
>> +		 * The reset should only clear the Root Error Status
>> +		 * of the RCEC. Only perform this for the
>> +		 * native case, i.e., an RCEC is present.
>> +		 */
>> +		root = dev->rcec;
>> +	else
>> +		root = dev;
>>
>> -	/* Disable Root's interrupt in response to error messages */
>> -	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>> -	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
>> -	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>> +	if (root)
>> +		aer = dev->aer_cap;
>>
>> -	rc = pci_bus_error_reset(dev);
>> -	pci_info(dev, "Root Port link has been reset\n");
>> +	if (aer) {
>> +		/* Disable Root's interrupt in response to error messages */
>> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>> +		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
>> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
>
> Not directly related to *this* patch, but my assumption was that in
> the APEI case, the firmware should retain ownership of the AER
> Capability, so the OS should not touch PCI_ERR_ROOT_COMMAND and
> PCI_ERR_ROOT_STATUS.
>
> But this code appears to ignore that ownership.  Jonathan, you must
> have looked at this recently for 068c29a248b6 ("PCI/ERR: Clear PCIe
> Device Status errors only if OS owns AER").  Do you have any insight
> about this?
>
>> -	/* Clear Root Error Status */
>> -	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
>> -	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
>> +		/* Clear Root Error Status */
>> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
>> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
>>
>> -	/* Enable Root Port's interrupt in response to error messages */
>> -	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>> -	reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
>> -	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>> +		/* Enable Root Port's interrupt in response to error messages */
>> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>> +		reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
>> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
>> +	}
>> +
>> +	if ((type == PCI_EXP_TYPE_RC_EC) || (type == PCI_EXP_TYPE_RC_END)) 
>> {
>> +		if (pcie_has_flr(root)) {
>> +			rc = pcie_flr(root);
>> +			pci_info(dev, "has been reset (%d)\n", rc);
>> +		}
>> +	} else {
>> +		rc = pci_bus_error_reset(root);
>
> Don't we want "dev" for both the FLR and pci_bus_error_reset()?  I
> think "root == dev" except when dev is an RCiEP.  When dev is an
> RCiEP, "root" is the RCEC (if present), and we want to reset the
> RCiEP, not the RCEC.

Right, when I did the goto in the earlier incarnation, I always set root 
to dev at the start and in the merge it needs to be dev always except 
for the RC_END where RCEC exists. Will change without bringing back the 
goto…

+       struct pci_dev *root = dev;

…

+non_native:
+       if ((type == PCI_EXP_TYPE_RC_EC) || (type ==
PCI_EXP_TYPE_RC_END)) {
+               rc = flr_on_rc(root);
+               pci_info(dev, "has been reset (%d)\n", rc);
+       } else {
+               rc = pci_bus_error_reset(root);
+               pci_info(dev, "Root Port link has been reset (%d)\n",
rc);
+       }


>
>> +		pci_info(dev, "Root Port link has been reset (%d)\n", rc);
>> +	}
>
> There are a couple changes here that I think should be split out.
>
> Based on my theory that when firmware retains control of AER, the OS
> should not touch PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS, and any
> updates to them would have to be done by firmware before we get here,
> I suggested reordering this:
>
>   - clear PCI_ERR_ROOT_COMMAND ROOT_PORT_INTR_ON_MESG_MASK
>   - do reset
>   - clear PCI_ERR_ROOT_STATUS (for APEI, presumably done by firmware?)
>   - enable PCI_ERR_ROOT_COMMAND ROOT_PORT_INTR_ON_MESG_MASK
>
> to this:
>
>   - clear PCI_ERR_ROOT_COMMAND ROOT_PORT_INTR_ON_MESG_MASK
>   - clear PCI_ERR_ROOT_STATUS
>   - enable PCI_ERR_ROOT_COMMAND ROOT_PORT_INTR_ON_MESG_MASK
>   - do reset
>
> If my theory is correct, I think we should still reorder this, but:
>
>   - It's a significant behavior change that deserves its own patch so
>     we can document/bisect/revert.
>
>   - I'm not sure why we clear the PCI_ERR_ROOT_COMMAND error reporting
>     bits.  In the new "clear COMMAND, clear STATUS, enable COMMAND"
>     order, it looks superfluous.  There's no reason to disable error
>     reporting while clearing the status bits.
>
>     The current "clear, reset, enable" order suggests that the reset
>     might cause errors that we should ignore.  I don't know whether
>     that's the case or not.  It dates from 6c2b374d7485 ("PCI-Express
>     AER implemetation: AER core and aerdriver"), which doesn't
>     elaborate.
>
>   - Should we also test for OS ownership of AER before touching
>     PCI_ERR_ROOT_STATUS?
>
>   - If we remove the PCI_ERR_ROOT_COMMAND fiddling (and I tentatively
>     think we *should* unless we can justify it), that would also
>     deserve its own patch.  Possibly (1) remove PCI_ERR_ROOT_COMMAND
>     fiddling, (2) reorder PCI_ERR_ROOT_STATUS clearing and reset, (3)
>     test for OS ownership of AER (?), (4) the rest of this patch.

You’ve highlighted some good questions.

I think we should remove the fiddling until we have a clearer picture 
and put that into its own patch.

Sean
>
>>  	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
>>  }
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index 7883c9791562..cbc5abfe767b 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -148,10 +148,10 @@ static int report_resume(struct pci_dev *dev, 
>> void *data)
>>
>>  /**
>>   * pci_walk_bridge - walk bridges potentially AER affected
>> - * @bridge:	bridge which may be a Port, an RCEC with associated 
>> RCiEPs,
>> - *		or an RCiEP associated with an RCEC
>> - * @cb:		callback to be called for each device found
>> - * @userdata:	arbitrary pointer to be passed to callback
>> + * @bridge   bridge which may be an RCEC with associated RCiEPs,
>> + *           or a Port.
>> + * @cb       callback to be called for each device found
>> + * @userdata arbitrary pointer to be passed to callback.
>>   *
>>   * If the device provided is a bridge, walk the subordinate bus, 
>> including
>>   * any bridged devices on buses under this bus.  Call the provided 
>> callback
>> @@ -164,8 +164,14 @@ static void pci_walk_bridge(struct pci_dev 
>> *bridge,
>>  			    int (*cb)(struct pci_dev *, void *),
>>  			    void *userdata)
>>  {
>> +	/*
>> +	 * In a non-native case where there is no OS-visible reporting
>> +	 * device the bridge will be NULL, i.e., no RCEC, no Downstream 
>> Port.
>> +	 */
>>  	if (bridge->subordinate)
>>  		pci_walk_bus(bridge->subordinate, cb, userdata);
>> +	else if (bridge->rcec)
>> +		cb(bridge->rcec, userdata);
>>  	else
>>  		cb(bridge, userdata);
>>  }
>> @@ -194,12 +200,6 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev 
>> *dev,
>>  	pci_dbg(bridge, "broadcast error_detected message\n");
>>  	if (state == pci_channel_io_frozen) {
>>  		pci_walk_bridge(bridge, report_frozen_detected, &status);
>> -		if (type == PCI_EXP_TYPE_RC_END) {
>> -			pci_warn(dev, "subordinate device reset not possible for 
>> RCiEP\n");
>> -			status = PCI_ERS_RESULT_NONE;
>> -			goto failed;
>> -		}
>> -
>>  		status = reset_subordinates(bridge);
>>  		if (status != PCI_ERS_RESULT_RECOVERED) {
>>  			pci_warn(bridge, "subordinate device reset failed\n");
>> -- 
>> 2.28.0
>>

  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16  0:10 [PATCH v9 00/15] Add RCEC handling to PCI/AER Sean V Kelley
2020-10-16  0:10 ` [PATCH v9 01/15] PCI/RCEC: Add RCEC class code and extended capability Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 02/15] PCI/RCEC: Bind RCEC devices to the Root Port driver Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 03/15] PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 04/15] PCI/ERR: Rename reset_link() to reset_subordinates() Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 05/15] PCI/ERR: Simplify by using pci_upstream_bridge() Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 06/15] PCI/ERR: Simplify by computing pci_pcie_type() once Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 08/15] PCI/ERR: Avoid negated conditional for clarity Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 09/15] PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() Sean V Kelley
2020-10-16 17:19   ` Bjorn Helgaas
2020-10-16  0:11 ` [PATCH v9 10/15] PCI/ERR: Limit AER resets in pcie_do_recovery() Sean V Kelley
2020-10-16 17:22   ` Bjorn Helgaas
2020-10-16 17:36     ` Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 11/15] PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR Sean V Kelley
2020-10-16 20:30   ` Bjorn Helgaas
2020-10-16 22:29     ` Bjorn Helgaas
2020-10-17  0:28       ` Kuppuswamy, Sathyanarayanan
2020-10-17  1:45       ` Kuppuswamy, Sathyanarayanan
2020-10-19 10:49       ` Ethan Zhao
2020-10-19 18:31         ` Sean V Kelley
2020-10-19 18:59           ` Kuppuswamy, Sathyanarayanan
2020-10-19 20:50             ` Sean V Kelley
2020-10-20 12:59               ` Jonathan Cameron
2020-10-20 16:28                 ` Bjorn Helgaas
2020-10-17 16:14     ` Sean V Kelley [this message]
2020-10-19 19:07       ` Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 13/15] PCI/AER: Add pcie_walk_rcec() to RCEC AER handling Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 14/15] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling Sean V Kelley
2020-10-16  0:11 ` [PATCH v9 15/15] PCI/AER: Add RCEC AER error injection support Sean V Kelley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2219B080-CB26-4FE3-96BD-6C489BAAEE8C@intel.com \
    --to=sean.v.kelley@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=seanvk.dev@oregontracks.org \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git