From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: From: Laurent Pinchart To: sricharan@codeaurora.org Subject: Re: [PATCH V8 07/11] iommu: of: Handle IOMMU lookup failure with deferred probing or error Date: Tue, 16 May 2017 17:06:10 +0300 Message-ID: <2288554.Av5LKGd7Dv@avalon> In-Reply-To: <71c52ac6c5b7839388ebe1608804da45@codeaurora.org> References: <1486136933-20328-1-git-send-email-sricharan@codeaurora.org> <1924197.MWBQ7kvoOo@avalon> <71c52ac6c5b7839388ebe1608804da45@codeaurora.org> MIME-Version: 1.0 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: okaya@codeaurora.org, Lorenzo Pieralisi , linux-arm-msm@vger.kernel.org, Joerg Roedel , Magnus Damm , Will Deacon , Linux-Renesas , ACPI Devel Maling List , iommu@lists.linux-foundation.org, Geert Uytterhoeven , Hanjun Guo , linux-pci , Bjorn Helgaas , tn@semihalf.com, Robin Murphy , linux-arm-msm-owner@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Marek Szyprowski Content-Type: text/plain; charset="us-ascii" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+bjorn=helgaas.com@lists.infradead.org List-ID: Hi Sricharan, On Tuesday 16 May 2017 19:10:03 sricharan@codeaurora.org wrote: > On 2017-05-16 12:47, Laurent Pinchart wrote: > > On Tuesday 16 May 2017 07:53:57 sricharan@codeaurora.org wrote: > >> On 2017-05-16 03:04, Laurent Pinchart wrote: > >>> On Monday 15 May 2017 23:37:16 Laurent Pinchart wrote: > >>>> On Wednesday 03 May 2017 15:54:59 Sricharan R wrote: > >>>>> On 5/3/2017 3:24 PM, Robin Murphy wrote: > >>>>>> On 02/05/17 19:35, Geert Uytterhoeven wrote: > >>>>>>> On Fri, Feb 3, 2017 at 4:48 PM, Sricharan R wrote: > >>>>>>>> From: Laurent Pinchart > >>>>>>>> > >>>>>>>> Failures to look up an IOMMU when parsing the DT iommus property > >>>>>>>> need to be handled separately from the .of_xlate() failures to > >>>>>>>> support deferred probing. > >>>>>>>> > >>>>>>>> The lack of a registered IOMMU can be caused by the lack of a > >>>>>>>> driver for the IOMMU, the IOMMU device probe not having been > >>>>>>>> performed yet, having been deferred, or having failed. > >>>>>>>> > >>>>>>>> The first case occurs when the device tree describes the bus > >>>>>>>> master and IOMMU topology correctly but no device driver exists for > >>>>>>>> the IOMMU yet or the device driver has not been compiled in. Return > >>>>>>>> NULL, the caller will configure the device without an IOMMU. > >>>>>>>> > >>>>>>>> The second and third cases are handled by deferring the probe of > >>>>>>>> the bus master device which will eventually get reprobed after the > >>>>>>>> IOMMU. > >>>>>>>> > >>>>>>>> The last case is currently handled by deferring the probe of the > >>>>>>>> bus master device as well. A mechanism to either configure the bus > >>>>>>>> master device without an IOMMU or to fail the bus master device > >>>>>>>> probe depending on whether the IOMMU is optional or mandatory would > >>>>>>>> be a good enhancement. > >>>>>>>> > >>>>>>>> Tested-by: Marek Szyprowski > >>>>>>>> Signed-off-by: Laurent Pichart > >>>>>>>> > >>>>>>>> Signed-off-by: Sricharan R > >>>>>>> > >>>>>>> This patch broke Renesas R-Car Gen3 platforms in renesas-drivers. > >>>>>>> As the IOMMU nodes in DT are not yet enabled, all devices having > >>>>>>> iommus properties in DT now fail to probe. > >>>>>> > >>>>>> How exactly do they fail to probe? Per d7b0558230e4, if there are no > >>>>>> ops registered then they should merely defer until we reach the > >>>>>> point of giving up and ignoring the IOMMU. Is it just that you have > >>>>>> no other late-probing drivers or post-init module loads to kick the > >>>>>> deferred queue after that point? I did try to find a way to > >>>>>> explicitly kick it from a suitably late initcall, but there didn't > >>>>>> seem to be any obvious public interface - anyone have any > >>>>>> suggestions? > >>>>>> > >>>>>> I think that's more of a general problem with the probe deferral > >>>>>> mechanism itself (I've seen the same thing happen with some of the > >>>>>> CoreSight stuff on Juno due to the number of inter-component > >>>>>> dependencies) rather than any specific fault of this series. > >>>>> > >>>>> I was thinking of an additional check like below to avoid the > >>>>> situation ? > >>>>> > >>>>> From 499b6e662f60f23740b8880882b0a16f16434501 Mon Sep 17 00:00:00 > >>>>> 2001 > >>>>> From: Sricharan R > >>>>> Date: Wed, 3 May 2017 13:16:59 +0530 > >>>>> Subject: [PATCH] iommu: of: Fix check for returning EPROBE_DEFER > >>>>> > >>>>> While returning EPROBE_DEFER for iommu masters > >>>>> take in to account of iommu nodes that could be > >>>>> marked in DT as 'status=disabled', in which case > >>>>> simply return NULL and let the master's probe > >>>>> continue rather than deferring. > >>>>> > >>>>> Signed-off-by: Sricharan R > >>>>> --- > >>>>> > >>>>> drivers/iommu/of_iommu.c | 1 + > >>>>> 1 file changed, 1 insertion(+) > >>>>> > >>>>> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c > >>>>> index 9f44ee8..e6e9bec 100644 > >>>>> --- a/drivers/iommu/of_iommu.c > >>>>> +++ b/drivers/iommu/of_iommu.c > >>>>> @@ -118,6 +118,7 @@ static bool of_iommu_driver_present(struct > >>>>> device_node *np) > >>>>> > >>>>> ops = iommu_ops_from_fwnode(fwnode); > >>>>> if ((ops && !ops->of_xlate) || > >>>>> + !of_device_is_available(iommu_spec->np) || > >>>>> (!ops && !of_iommu_driver_present(iommu_spec->np))) > >>>>> return NULL; > >>>> > >>>> This looks good to me, but won't be enough. The ipmmu-vmsa driver in > >>>> v4.12-rc1 doesn't call iommu_device_register() and thus won't be found > >>>> by iommu_ops_from_fwnode(). Furthermore, it doesn't > >>>> IOMMU_OF_DECLARE(), > >>>> and thus will always be considered as absent. > >>>> > >>>> I agree that the ipmmu-vmsa driver needs to be fixed, but it would > >>>> have been nice to check existing IOMMU drivers before merging this > >>>> patch series... > >>> > >>> Please pardon the question, but has this patch series been tested on > >>> ARM32 ? > >>> > >>> When the device is probed the arch_setup_dma_ops() function is called. > >>> It sets the device's dma_ops and the mapping (in > >>> __arm_iommu_attach_device()). If probe is deferred, > >>> arch_teardown_dma_ops() is called which in turn calls > >>> arch_teardown_dma_ops(). This removes the mapping but doesn't touch the > >>> dma_ops. The next time the device is probed, arch_setup_dma_ops() bails > >>> out immediately as the dma_ops are already set, leaving us with a > >>> device bound to IOMMU operations but with no mapping. This oopses later > >>> as soon as the kernel tries to map memory for the device through the > >>> IOMMU. > >> > >> Resetting the dma_ops for arm32 was added in this patch [1], which I > >> missed to send in the original series, but now have added to Russell's > >> patch tracking system. > > > > Thank you. I fear that won't be enough though. > > > >> [1] https://patchwork.kernel.org/patch/9434105/ > > > > Quoting the patch: > > > >> arch_teardown_dma_ops() being the inverse of arch_setup_dma_ops() > >> ,dma_ops should be cleared in the teardown path. Otherwise > >> this causes problem when the probe of device is retried after > >> being deferred. The device's iommu structures are cleared > >> after EPROBEDEFER error, but on the next try dma_ops will still > >> be set to old value, which is not right. > >> > >> Signed-off-by: Sricharan R > >> Reviewed-by: Robin Murphy > >> --- > >> > >> arch/arm/mm/dma-mapping.c | 1 + > >> 1 file changed, 1 insertion(+) > >> > >> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c > >> index ab4f745..a40f03e 100644 > >> --- a/arch/arm/mm/dma-mapping.c > >> +++ b/arch/arm/mm/dma-mapping.c > >> @@ -2358,6 +2358,7 @@ static void arm_teardown_iommu_dma_ops(struct > >> device *dev) > > > >> __arm_iommu_detach_device(dev); > >> arm_iommu_release_mapping(mapping); > >> + set_dma_ops(dev, NULL); > >> } > >> #else > > > > The subject mentions arch_teardown_dma_ops(), which I think is correct, > > but the patch adds the set_dma_ops() call to arm_teardown_iommu_dma_ops(). > > > > However, the situation is perhaps more complex. Note the check at the > > > > beginning of arch_setup_dma_ops(): > > /* > > * Don't override the dma_ops if they have already been set. Ideally > > * this should be the only location where dma_ops are set, remove this > > * check when all other callers of set_dma_ops will have disappeared. > > */ > > if (dev->dma_ops) > > return; > > > > If you set the dma_ops to NULL in arm_teardown_iommu_dma_ops() or > > arch_teardown_dma_ops(), the next call to arch_setup_dma_ops() will > > override them. To be safe you should only set them to NULL if they have > > been set by arch_setup_dma_ops(). More than that, arch_teardown_dma_ops() > > should probably not call arm_teardown_iommu_dma_ops() at all if the > > dma_ops were set by arm_iommu_attach_device() and not > > arch_teardown_dma_ops(). One option would be to add a field to struct > > dev_archdata to store that information. To avoid growing the structure, > > which is embedded in every struct device, you could possibly turn the > > dma_coherent bool into a bitfield. > > > > @@ -19,7 +19,8 @@ struct dev_archdata { > > #ifdef CONFIG_XEN > > const struct dma_map_ops *dev_dma_ops; > > #endif > > - bool dma_coherent; > > + bool dma_coherent:1; > > + bool dma_ops_setup:1; > > }; > > > > struct omap_device; > > > > I haven't checked, however, whether the dma_coherent field would need > > to be accessed atomically, so this might be a bad idea. > > > > Last but not least, a fix must be merged in v4.12, and the sooner the > > better. > > ho, yet another combination. This seems to be a problem with exynos_iommu, > ipmmu-vmsa, mtk_iommu_v1 which calls the arm_iommu_attach_device with its > own custom mapping. They are calling arm_iommu_attach_device from the > add_device callback and that is not always replayed when the reprobe happens > and these archs are storing the old mapping data in private structures which > might not be cleared in the teardown path. Yes, I know, it's messy :-/ There's a handful of non-IOMMU drivers calling arm_iommu_attach_device() directly too. All these should be fixed, but in the meantime, let's try not to break them. > I will post the fix that you have suggested. Thank you. You might want to use an unsigned int bitfield instead of a bool bitfield as Sakari suggested. It would be nice to check the code setting the dma_coherent field to make sure there will be no race with code setting the new dma_ops_setup field (which might not be the best name, feel free to rename it). I have successfully test the patch, let me know if there's anything else I can do to help. > >>> I might be missing something obvious, but I don't see how this can > >>> work. > >>> > >>>>>>> This can be fixed by either: > >>>>>>> - Disabling CONFIG_IPMMU_VMSA, or > >>>>>>> - Reverting commit 7b07cbefb68d486f (but keeping "int ret = 0;"). > >>>>>>> > >>>>>>> Note that this was a bit hard to investigate, as R-Car Gen3 support > >>>>>>> wasn't upstreamed yet, so bisection pointed to a merge commit. -- Regards, Laurent Pinchart _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel