From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from us01smtprelay-2.synopsys.com ([198.182.60.111]:44612 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755929AbdLTTrs (ORCPT ); Wed, 20 Dec 2017 14:47:48 -0500 Subject: Re: [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support To: Lorenzo Pieralisi , Niklas Cassel , Jingoo Han , Joao Pinto CC: , , , Niklas Cassel , , References: <20171219232940.659-1-niklas.cassel@axis.com> <20171220173416.GD1709@red-moon> From: Joao Pinto Message-ID: <32f6e02c-4230-9222-0ee1-54a045e78bd5@synopsys.com> Date: Wed, 20 Dec 2017 19:47:41 +0000 MIME-Version: 1.0 In-Reply-To: <20171220173416.GD1709@red-moon> Content-Type: text/plain; charset="utf-8" Sender: linux-pci-owner@vger.kernel.org List-ID: Hello to all, Às 5:34 PM de 12/20/2017, Lorenzo Pieralisi escreveu: > On Wed, Dec 20, 2017 at 12:29:21AM +0100, Niklas Cassel wrote: >> This is a series that adds: >> - PCI endpoint mode support in the ARTPEC-6 driver. >> - ARTPEC-7 SoC support in the ARTPEC-6 driver (the SoCs are very similar). >> - Small fixes for MSI in designware-ep and designware-host, >> needed to get endpoint mode support working for ARTPEC-6. >> - Cleanups in pci-dra7xx to better prepare for endpoint mode in other >> DWC based PCIe drivers. > > Joao, Jingoo, > > Gustavo tested the series and Kishon ACK'ed the relevant patches, > I need your ACKs on designware patches to queue this series for > v4.16. > > I am away from tomorrow (noon) till beginning of January which means > that either I queue this series tomorrow or at -rc6, please do > chime in if you can. Sorry, I have been a bit tied up! Already checked each patch related to DWC. Could anyone from artpec finish the revision, since there are some patches related to that SoC? Thanks, Joao > > Thanks, > Lorenzo > >> Changes since V5: >> -Dropped GFP_DMA32 from "PCI: dwc: Use the DMA-API to get the MSI address" >> so that we use the exact same GFP flags as before. >> -Rewrote commit message for "PCI: dwc: Make cpu_addr_fixup take struct >> dw_pcie as argument" to be more detailed. >> >> Niklas Cassel (18): >> PCI: dwc: Use the DMA-API to get the MSI address >> PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits >> PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be >> writable >> PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init >> PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() >> PCI: designware-ep: Add generic function for raising MSI irq >> PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep >> mode >> PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than >> in probe >> PCI: dwc: dra7xx: Help compiler to remove unused code >> PCI: dwc: artpec6: Remove unused defines >> PCI: dwc: artpec6: Use BIT and GENMASK macros >> PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller >> functions >> bindings: PCI: artpec: Add support for endpoint mode >> PCI: dwc: artpec6: Add support for endpoint mode >> PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument >> PCI: dwc: artpec6: Deassert the core before waiting for PHY >> bindings: PCI: artpec: Add support for the ARTPEC-7 SoC >> PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC >> >> .../devicetree/bindings/pci/axis,artpec6-pcie.txt | 5 +- >> drivers/pci/dwc/Kconfig | 68 +-- >> drivers/pci/dwc/Makefile | 4 +- >> drivers/pci/dwc/pci-dra7xx.c | 27 +- >> drivers/pci/dwc/pcie-artpec6.c | 470 ++++++++++++++++++--- >> drivers/pci/dwc/pcie-designware-ep.c | 59 ++- >> drivers/pci/dwc/pcie-designware-host.c | 15 +- >> drivers/pci/dwc/pcie-designware.c | 2 +- >> drivers/pci/dwc/pcie-designware.h | 22 +- >> 9 files changed, 554 insertions(+), 118 deletions(-) >> >> -- >> 2.14.2 >>