Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Sean V Kelley" <sean.v.kelley@intel.com>
To: "Jonathan Cameron" <Jonathan.Cameron@Huawei.com>
Cc: bhelgaas@google.com, rjw@rjwysocki.net, tony.luck@intel.com,
	"Raj, Ashok" <ashok.raj@intel.com>,
	sathyanarayanan.kuppuswamy@linux.intel.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Qiuxu Zhuo" <qiuxu.zhuo@intel.com>
Subject: Re: [RFC PATCH 2/9] PCI: Extend Root Port Driver to support RCEC
Date: Mon, 27 Jul 2020 08:05:16 -0700
Message-ID: <3628B87C-DE0E-477E-85C1-FFD154DC4EFD@intel.com> (raw)
In-Reply-To: <20200727133010.00003de8@Huawei.com>

On 27 Jul 2020, at 5:30, Jonathan Cameron wrote:

> On Fri, 24 Jul 2020 10:22:16 -0700
> Sean V Kelley <sean.v.kelley@intel.com> wrote:
>
>> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>
>> If a Root Complex Integrated Endpoint (RCiEP) is implemented, errors 
>> may
>> optionally be sent to a corresponding Root Complex Event Collector 
>> (RCEC).
>> Each RCiEP must be associated with no more than one RCEC. Interface 
>> errors
>> are reported to the OS by RCECs.
>>
>> For an RCEC (technically not a Bridge), error messages "received" 
>> from
>> associated RCiEPs must be enabled for "transmission" in order to 
>> cause a
>> System Error via the Root Control register or (when the Advanced 
>> Error
>> Reporting Capability is present) reporting via the Root Error Command
>> register and logging in the Root Error Status register and Error 
>> Source
>> Identification register.
>>
>> Given the commonality with Root Ports and the need to also support 
>> AER
>> and PME services for RCECs, extend the Root Port driver to support 
>> RCEC
>> devices through the addition of the RCEC Class ID to the driver
>> structure.
>>
> Hi.
>
> I'm surprised it ended up this simple :) Seems we are a bit lucky that
> the existing code is rather flexible on what is there and what isn't
> and that there is never any reason to directly touch the various
> type1 specific registers (given as I read the spec, an RCEC uses a
> type0 config space header unlike the ports).

Which is part of the reason why I chose to refer to it as an RFC, 
because it seemed simpler and I was unsure if we were missing anything, 
and it turns out we were. Unfortunately, to avoid churn, I’ve left 
quite a bit of comments/naming intact with “root”/“port” terms.

>
> Given you mention PME, it's probably worth noting (I think) you aren't
> actually enabling the service yet as there is a check in that path on 
> whether we
> have a root port or not.
> https://elixir.bootlin.com/linux/v5.8-rc4/source/drivers/pci/pcie/portdrv_core.c#L241

Good catch, testing has been only done at this point with AER injection.
Will correct.

Thanks,

Sean

>
> Thanks,
>
> Jonathan
>
>
>> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
>> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
>> ---
>>  drivers/pci/pcie/portdrv_pci.c | 5 ++++-
>>  1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/pcie/portdrv_pci.c 
>> b/drivers/pci/pcie/portdrv_pci.c
>> index 3acf151ae015..d5b109499b10 100644
>> --- a/drivers/pci/pcie/portdrv_pci.c
>> +++ b/drivers/pci/pcie/portdrv_pci.c
>> @@ -106,7 +106,8 @@ static int pcie_portdrv_probe(struct pci_dev 
>> *dev,
>>  	if (!pci_is_pcie(dev) ||
>>  	    ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
>>  	     (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
>> -	     (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
>> +	     (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) &&
>> +	     (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)))
>>  		return -ENODEV;
>>
>>  	status = pcie_port_device_register(dev);
>> @@ -195,6 +196,8 @@ static const struct pci_device_id port_pci_ids[] 
>> = {
>>  	{ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0) },
>>  	/* subtractive decode PCI-to-PCI bridge, class type is 060401h */
>>  	{ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x01), ~0) },
>> +	/* handle any Root Complex Event Collector */
>> +	{ PCI_DEVICE_CLASS(((PCI_CLASS_SYSTEM_RCEC << 8) | 0x00), ~0) },
>>  	{ },
>>  };
>>

  reply index

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 17:22 [RFC PATCH 0/9] Add RCEC handling to PCI/AER Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 1/9] pci_ids: Add class code and extended capability for RCEC Sean V Kelley
2020-07-27 10:00   ` Jonathan Cameron
2020-07-27 10:21     ` Jonathan Cameron
2020-07-27 15:22       ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 2/9] PCI: Extend Root Port Driver to support RCEC Sean V Kelley
2020-07-27 12:30   ` Jonathan Cameron
2020-07-27 15:05     ` Sean V Kelley [this message]
2020-07-24 17:22 ` [RFC PATCH 3/9] PCI/portdrv: Add pcie_walk_rcec() to walk RCiEPs associated with RCEC Sean V Kelley
2020-07-27 10:49   ` Jonathan Cameron
2020-07-27 15:21     ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 4/9] PCI/AER: Extend AER error handling to RCECs Sean V Kelley
2020-07-27 11:00   ` Jonathan Cameron
2020-07-27 14:58     ` Sean V Kelley
2020-07-27 14:04   ` Jonathan Cameron
2020-07-27 15:00     ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 5/9] PCI/AER: Apply function level reset to RCiEP on fatal error Sean V Kelley
2020-07-27 11:17   ` Jonathan Cameron
2020-07-28 13:27     ` Zhuo, Qiuxu
2020-07-28 16:14       ` Sean V Kelley
2020-07-28 17:02         ` Jonathan Cameron
2020-07-28 17:42           ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 6/9] PCI: Add 'rcec' field to pci_dev for associated RCiEPs Sean V Kelley
2020-07-27 11:23   ` Jonathan Cameron
2020-07-27 15:39     ` Sean V Kelley
2020-07-27 16:11     ` Jonathan Cameron
2020-07-27 16:28       ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 7/9] PCI/AER: Add RCEC AER handling Sean V Kelley
2020-07-27 12:22   ` Jonathan Cameron
2020-07-27 15:19     ` Sean V Kelley
2020-07-27 17:14       ` Jonathan Cameron
2020-07-24 17:22 ` [RFC PATCH 8/9] PCI/PME: Add RCEC PME handling Sean V Kelley
2020-08-04  8:35   ` Jay Fang
2020-08-04  9:47     ` Jonathan Cameron
2020-07-24 17:22 ` [RFC PATCH 9/9] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-07-27 12:37 ` [RFC PATCH 0/9] Add RCEC handling to PCI/AER Jonathan Cameron
2020-07-27 14:56   ` Sean V Kelley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3628B87C-DE0E-477E-85C1-FFD154DC4EFD@intel.com \
    --to=sean.v.kelley@intel.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git