Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Kuppuswamy, Sathyanarayanan"  <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Sinan Kaya <okaya@kernel.org>, Bjorn Helgaas <helgaas@kernel.org>
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, ashok.raj@intel.com,
	Jay Vosburgh <jay.vosburgh@canonical.com>
Subject: Re: [PATCH v3 1/1] PCI/ERR: Fix reset logic in pcie_do_recovery() call
Date: Sun, 27 Sep 2020 19:43:46 -0700
Message-ID: <3bc0fd23-8ddd-32c5-1dd9-4d5209ea68c3@linux.intel.com> (raw)
In-Reply-To: <44f0cac5-8deb-1169-eb6d-93ac4889fe7e@kernel.org>

Hi,

On 9/25/20 11:30 AM, Sinan Kaya wrote:
> On 9/25/2020 2:16 PM, Kuppuswamy, Sathyanarayanan wrote:
>>>
>>> If this is a too involved change, DPC driver should restore state
>>> when hotplug is not supported.
>> Yes. we can add a condition for hotplug capability check.
>>>
>>> DPC driver should be self-sufficient by itself.
>>>
> 
> Sounds good.
> 
>>>> Also for non-fatal errors, if reset is requested then we still need
>>>> some kind of bus reset call here
>>>
>>> DPC should handle both fatal and non-fatal cases
>> Currently DPC is only triggered for FATAL errors.
>>   and cause a bus reset
> 
> Thanks for the heads up.
> This seems to have changed since I looked at the DPC code.
> 
>>> in hardware already before triggering an interrupt.
>> Error recovery is not triggered only DPC driver. AER also uses the
>> same error recovery code. If DPC is not supported, then we still need
>> reset logic.
> 
> It sounds like we are cross-talking two issues.
> 
> 1. no state restore on DPC after FATAL error.
> Let's fix this.
Agree. Few more detail about the above issue is,

There are two cases under FATAL error.

FATAL + hotplug - In this case, link will be reseted. And hotplug handler
will remove the driver state. This case works well with current code.

FATAL + no-hotplug - In this case, link will still be reseted. But
currently driver state is not properly restored. So I attempted
to restore it using pci_reset_bus().

  		status = reset_link(dev);
-		if (status != PCI_ERS_RESULT_RECOVERED) {
+		if (status == PCI_ERS_RESULT_RECOVERED) {
+			status = PCI_ERS_RESULT_NEED_RESET;

...

  	if (status == PCI_ERS_RESULT_NEED_RESET) {
  		/*
-		 * TODO: Should call platform-specific
-		 * functions to reset slot before calling
-		 * drivers' slot_reset callbacks?
+		 * TODO: Optimize the call to pci_reset_bus()
+		 *
+		 * There are two components to pci_reset_bus().
+		 *
+		 * 1. Do platform specific slot/bus reset.
+		 * 2. Save/Restore all devices in the bus.
+		 *
+		 * For hotplug capable devices and fatal errors,
+		 * device is already in reset state due to link
+		 * reset. So repeating platform specific slot/bus
+		 * reset via pci_reset_bus() call is redundant. So
+		 * can optimize this logic and conditionally call
+		 * pci_reset_bus().
  		 */
+		pci_reset_bus(dev);

> 
> 2. no bus reset on NON_FATAL error through AER driver path.
> This already tells me that you need to split your change into
> multiple patches.
> 
> Let's talk about this too. bus reset should be triggered via
> AER driver before informing the recovery.
But as per error recovery documentation, any call to
->error_detected() or ->mmio_enabled() can request
PCI_ERS_RESULT_NEED_RESET. So we need to add code
to do the actual reset before calling ->slot_reset()
callback. So call to pci_reset_bus() fixes this
issue.

  	if (status == PCI_ERS_RESULT_NEED_RESET) {
+		pci_reset_bus(dev);


> 
> 	if (status == PCI_ERS_RESULT_NEED_RESET) {
> 		/*
> 		 * TODO: Should call platform-specific
> 		 * functions to reset slot before calling
> 		 * drivers' slot_reset callbacks?
> 		 */
> 		status = PCI_ERS_RESULT_RECOVERED;
> 		pci_dbg(dev, "broadcast slot_reset message\n");
> 		pci_walk_bus(bus, report_slot_reset, &status);
> 	}
> 

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer

  reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <3cad1a07-509b-ef51-f635-71def2ff8293@linux.intel.com>
2020-09-22 23:33 ` Bjorn Helgaas
2020-09-22 23:44   ` Kuppuswamy, Sathyanarayanan
2020-09-24  1:15     ` Sinan Kaya
2020-09-24  2:04       ` Kuppuswamy, Sathyanarayanan
2020-09-24  2:16         ` Sinan Kaya
2020-09-24  2:51           ` Kuppuswamy, Sathyanarayanan
2020-09-24  3:13             ` Sinan Kaya
2020-09-24  4:06               ` Kuppuswamy, Sathyanarayanan
2020-09-24 20:52                 ` Sinan Kaya
2020-09-25  5:11                   ` Kuppuswamy, Sathyanarayanan
2020-09-25 16:55                     ` Sinan Kaya
2020-09-25 17:11                       ` Kuppuswamy, Sathyanarayanan
2020-09-25 17:47                         ` Sinan Kaya
2020-09-25 18:16                           ` Kuppuswamy, Sathyanarayanan
2020-09-25 18:30                             ` Sinan Kaya
2020-09-28  2:43                               ` Kuppuswamy, Sathyanarayanan [this message]
2020-09-28  8:41                                 ` Ethan Zhao
2020-09-28 11:17                                 ` Sinan Kaya
2020-09-28 12:16                                   ` Sinan Kaya
2020-09-28 17:15                                   ` Kuppuswamy, Sathyanarayanan
2020-09-28 18:02                                     ` Sinan Kaya
2020-09-28 18:25                                       ` Sinan Kaya
2020-09-28 18:32                                         ` Kuppuswamy, Sathyanarayanan
2020-10-12  5:13                                           ` Kuppuswamy, Sathyanarayanan
2020-10-12 14:51                                             ` Sinan Kaya
2020-09-28 12:11                                 ` Sinan Kaya
2020-09-25 23:50                             ` Sinan Kaya
2020-07-24 19:07 sathyanarayanan.kuppuswamy
2020-09-01  5:41 ` Kuppuswamy, Sathyanarayanan
2020-09-22 18:52 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3bc0fd23-8ddd-32c5-1dd9-4d5209ea68c3@linux.intel.com \
    --to=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=jay.vosburgh@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=okaya@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git