[PATCH net-next 3/4] PCI/VPD: Change Chelsio T4 quirk to provide access to full virtual EEPROM address space

[Heiner Kallweit <hkallweit1@gmail.com>]

cxgb4 uses the full VPD address space for accessing its EEPROM (with some
mapping, see t4_eeprom_ptov()). In cudbg_collect_vpd_data() it sets the
VPD len to 32K (PCI_VPD_MAX_SIZE), and then back to 2K (CUDBG_VPD_PF_SIZE).
Having official (structured) and unofficial (unstructured) VPD data
violates the PCI spec, let's set VPD len according to all data that can be
accessed via PCI VPD access, no matter of its structure.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/pci/vpd.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index db86fe226..90f17f3b7 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -630,16 +630,11 @@ static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
 	int func = (dev->device & 0x0f00) >>  8;
 
 	/*
-	 * If this is a T4 or later based adapter, the special VPD is at offset
-	 * 0x400 for the Physical Functions (the SR-IOV Virtual Functions have
-	 * no VPD Capabilities). The PCI VPD Access core routines will normally
-	 * compute the size of the VPD by parsing the VPD Data Structure at
-	 * offset 0x000.  This will result in silent failures when attempting
-	 * to accesses these other VPD areas which are beyond those computed
-	 * limits.
+	 * If this is a T4 or later based adapter, provide access to the full
+	 * virtual EEPROM address space.
 	 */
 	if (chip >= 0x4 && func < 0x8)
-		pci_set_vpd_size(dev, 2048);
+		pci_set_vpd_size(dev, PCI_VPD_MAX_SIZE);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
-- 
2.30.0