From: Vidya Sagar <vidyas@nvidia.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<jonathanh@nvidia.com>, <kishon@ti.com>,
<catalin.marinas@arm.com>, <will.deacon@arm.com>,
<jingoohan1@gmail.com>, <gustavo.pimentel@synopsys.com>,
<mperttunen@nvidia.com>, <linux-pci@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <kthota@nvidia.com>,
<mmaddireddy@nvidia.com>, <sagar.tv@gmail.com>
Subject: Re: [PATCH V7 13/15] phy: tegra: Add PCIe PIPE2UPHY support
Date: Wed, 22 May 2019 01:07:49 +0530 [thread overview]
Message-ID: <40509b95-0e64-f533-cc78-6ebc81daf321@nvidia.com> (raw)
In-Reply-To: <20190521110011.GL29166@ulmo>
On 5/21/2019 4:30 PM, Thierry Reding wrote:
> On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote:
>> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
>> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
>> For each PCIe lane of a controller, there is a P2U unit instantiated at
>> hardware level. This driver provides support for the programming required
>> for each P2U that is going to be used for a PCIe controller.
>>
>> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
>> ---
>> Changes since [v6]:
>> * None
>>
>> Changes since [v5]:
>> * Addressed review comments from Thierry
>>
>> Changes since [v4]:
>> * None
>>
>> Changes since [v3]:
>> * Rebased on top of linux-next top of the tree
>>
>> Changes since [v2]:
>> * Replaced spaces with tabs in Kconfig file
>> * Sorted header file inclusion alphabetically
>>
>> Changes since [v1]:
>> * Added COMPILE_TEST in Kconfig
>> * Removed empty phy_ops implementations
>> * Modified code according to DT documentation file modifications
>>
>> drivers/phy/tegra/Kconfig | 7 ++
>> drivers/phy/tegra/Makefile | 1 +
>> drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++
>> 3 files changed, 117 insertions(+)
>> create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c
>>
>> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
>> index a3b1de953fb7..06d423fa85b4 100644
>> --- a/drivers/phy/tegra/Kconfig
>> +++ b/drivers/phy/tegra/Kconfig
>> @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB
>>
>> To compile this driver as a module, choose M here: the module will
>> be called phy-tegra-xusb.
>> +
>> +config PHY_TEGRA194_PCIE_P2U
>> + tristate "NVIDIA Tegra P2U PHY Driver"
>
> The Kconfig symbol and driver are named inconsistently. That's not
> inherently wrong, but I think it unnecessarily complicates things. Why
> not just do something like:
>
> config PHY_TEGRA194_P2U
>
> and name the driver...
Ok. Done.
>
>> + depends on ARCH_TEGRA || COMPILE_TEST
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
>> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
>> index a93cd9a499b2..1aaca794f40c 100644
>> --- a/drivers/phy/tegra/Makefile
>> +++ b/drivers/phy/tegra/Makefile
>> @@ -5,3 +5,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
>> +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o
>
> ... phy-tegra194-p2u here? Or perhaps even leave away the 194 and make
> it just phy-tegra-p2u. That would make it consistent with the
> phy-tegra-xusb driver.
I'll go with phy-tegra194-p2u here as P2U is present only starting from T194.
>
> Looks good otherwise.
>
> Thierry
>
>> diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> new file mode 100644
>> index 000000000000..fae2afe1a1aa
>> --- /dev/null
>> +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> @@ -0,0 +1,109 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC
>> + *
>> + * Copyright (C) 2019 NVIDIA Corporation.
>> + *
>> + * Author: Vidya Sagar <vidyas@nvidia.com>
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/phy/phy.h>
>> +
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +
>> +#define P2U_RX_DEBOUNCE_TIME 0xa4
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160
>> +
>> +struct tegra_p2u {
>> + void __iomem *base;
>> +};
>> +
>> +static int tegra_p2u_power_on(struct phy *x)
>> +{
>> + struct tegra_p2u *phy = phy_get_drvdata(x);
>> + u32 val;
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> +
>> + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME);
>> + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
>> + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
>> + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops ops = {
>> + .power_on = tegra_p2u_power_on,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int tegra_p2u_probe(struct platform_device *pdev)
>> +{
>> + struct phy_provider *phy_provider;
>> + struct device *dev = &pdev->dev;
>> + struct phy *generic_phy;
>> + struct tegra_p2u *phy;
>> + struct resource *res;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
>> + phy->base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(phy->base))
>> + return PTR_ERR_OR_ZERO(phy->base);
>> +
>> + platform_set_drvdata(pdev, phy);
>> +
>> + generic_phy = devm_phy_create(dev, NULL, &ops);
>> + if (IS_ERR(generic_phy))
>> + return PTR_ERR_OR_ZERO(generic_phy);
>> +
>> + phy_set_drvdata(generic_phy, phy);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + if (IS_ERR(phy_provider))
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id tegra_p2u_id_table[] = {
>> + {
>> + .compatible = "nvidia,tegra194-p2u",
>> + },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, tegra_p2u_id_table);
>> +
>> +static struct platform_driver tegra_p2u_driver = {
>> + .probe = tegra_p2u_probe,
>> + .driver = {
>> + .name = "tegra194-p2u",
>> + .of_match_table = tegra_p2u_id_table,
>> + },
>> +};
>> +module_platform_driver(tegra_p2u_driver);
>> +
>> +MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra PIPE2UPHY PHY driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.17.1
>>
next prev parent reply other threads:[~2019-05-21 19:38 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-17 12:38 [PATCH V7 00/15] Add Tegra194 PCIe support Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 01/15] PCI: Add #defines for some of PCIe spec r4.0 features Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 02/15] PCI: Disable MSI for Tegra194 root port Vidya Sagar
2019-05-21 10:27 ` Thierry Reding
2019-05-21 16:47 ` Vidya Sagar
2019-05-21 19:34 ` Vidya Sagar
2019-05-21 19:36 ` Bjorn Helgaas
2019-05-22 8:07 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 03/15] PCI: dwc: Perform dbi regs write lock towards the end Vidya Sagar
2019-05-21 10:29 ` Thierry Reding
2019-05-17 12:38 ` [PATCH V7 04/15] PCI: dwc: Move config space capability search API Vidya Sagar
2019-05-21 10:29 ` Thierry Reding
2019-05-21 21:17 ` Bjorn Helgaas
2019-05-22 8:56 ` Vidya Sagar
2019-05-22 14:02 ` Bjorn Helgaas
2019-05-24 14:46 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 05/15] PCI: dwc: Add ext " Vidya Sagar
2019-05-21 10:36 ` Thierry Reding
2019-05-21 17:14 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 06/15] dt-bindings: PCI: designware: Add binding for CDM register check Vidya Sagar
2019-05-21 10:37 ` Thierry Reding
2019-05-24 20:23 ` Rob Herring
2019-05-17 12:38 ` [PATCH V7 07/15] PCI: dwc: Add support to enable " Vidya Sagar
2019-05-21 10:38 ` Thierry Reding
2019-05-17 12:38 ` [PATCH V7 08/15] dt-bindings: Add PCIe supports-clkreq property Vidya Sagar
2019-05-21 10:39 ` Thierry Reding
2019-05-17 12:38 ` [PATCH V7 09/15] dt-bindings: PCI: tegra: Add device tree support for Tegra194 Vidya Sagar
2019-05-21 10:51 ` Thierry Reding
2019-05-21 18:00 ` Vidya Sagar
2019-05-24 20:26 ` Rob Herring
2019-05-17 12:38 ` [PATCH V7 10/15] dt-bindings: PHY: P2U: Add Tegra194 P2U block Vidya Sagar
2019-05-21 10:52 ` Thierry Reding
2019-05-17 12:38 ` [PATCH V7 11/15] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT Vidya Sagar
2019-05-17 13:03 ` Ard Biesheuvel
2019-05-17 17:38 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 12/15] arm64: tegra: Enable PCIe slots in P2972-0000 board Vidya Sagar
2019-05-21 10:54 ` Thierry Reding
2019-05-21 18:17 ` Vidya Sagar
2019-05-22 13:48 ` Thierry Reding
2019-05-17 12:38 ` [PATCH V7 13/15] phy: tegra: Add PCIe PIPE2UPHY support Vidya Sagar
2019-05-21 11:00 ` Thierry Reding
2019-05-21 19:37 ` Vidya Sagar [this message]
2019-05-21 11:00 ` Thierry Reding
2019-05-22 8:59 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 14/15] PCI: tegra: Add Tegra194 PCIe support Vidya Sagar
2019-05-21 11:41 ` Thierry Reding
2019-05-22 12:05 ` Vidya Sagar
2019-05-22 14:14 ` Thierry Reding
2019-05-24 18:07 ` Vidya Sagar
2019-05-17 12:38 ` [PATCH V7 15/15] arm64: Add Tegra194 PCIe driver to defconfig Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40509b95-0e64-f533-cc78-6ebc81daf321@nvidia.com \
--to=vidyas@nvidia.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=mmaddireddy@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).