Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Chuan Hua, Lei" <chuanhua.lei@linux.intel.com>
To: Dilip Kota <eswara.kota@linux.intel.com>,
	jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
	lorenzo.pieralisi@arm.com, robh@kernel.org,
	martin.blumenstingl@googlemail.com, linux-pci@vger.kernel.org,
	hch@infradead.org, devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, andriy.shevchenko@intel.com,
	cheol.yong.kim@intel.com, qi-ming.wu@intel.com
Subject: Re: [PATCH v3 1/2] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
Date: Thu, 5 Sep 2019 10:23:19 +0800
Message-ID: <54ec6a30-69d8-a4af-95fa-2f457d605142@linux.intel.com> (raw)
In-Reply-To: <fe9549470bc06ea0d0dfc80f46a579baa49b911a.1567585181.git.eswara.kota@linux.intel.com>

Hi Dilip,

On 9/4/2019 6:10 PM, Dilip Kota wrote:
> The Intel PCIe RC controller is Synopsys Designware
> based PCIe core. Add YAML schemas for PCIe in RC mode
> present in Intel Universal Gateway soc.
>
> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> ---
> changes on v3:
> 	Add the appropriate License-Identifier
> 	Rename intel,rst-interval to 'reset-assert-us'
rst->interval to reset-assert-ms(should be typo error)
> 	Add additionalProperties: false
> 	Rename phy-names to 'pciephy'
> 	Remove the dtsi node split of SoC and board in the example
> 	Add #interrupt-cells = <1>; or else interrupt parsing will fail
> 	Name yaml file with compatible name
>
>   .../devicetree/bindings/pci/intel,lgm-pcie.yaml    | 137 +++++++++++++++++++++
>   1 file changed, 137 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pci/intel,lgm-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/intel,lgm-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,lgm-pcie.yaml
> new file mode 100644
> index 000000000000..5e5cc7fd66cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/intel,lgm-pcie.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel AXI bus based PCI express root complex
> +
> +maintainers:
> +  - Dilip Kota <eswara.kota@linux.intel.com>
> +
> +properties:
> +  compatible:
> +    const: intel,lgm-pcie
> +
> +  device_type:
> +    const: pci
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: Controller control and status registers.
> +      - description: PCIe configuration registers.
> +      - description: Controller application registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: app
> +
> +  ranges:
> +    description: Ranges for the PCI memory and I/O regions.
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    description: PCIe registers interface clock.
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pciephy
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  num-lanes:
> +    description: Number of lanes to use for this port.
> +
> +  linux,pci-domain:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: PCI domain ID.
> +
> +  interrupts:
> +    description: PCIe core integrated miscellaneous interrupt.
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  interrupt-map-mask:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  interrupt-map:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  max-link-speed:
> +    description: Specify PCI Gen for link capability.
> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.
> +
> +  reset-assert-ms:
> +    description: |
> +      Device reset interval in ms.
> +      Some devices need an interval upto 500ms. By default it is 100ms.
> +
> +required:
> +  - compatible
> +  - device_type
> +  - reg
> +  - reg-names
> +  - ranges
> +  - resets
> +  - clocks
> +  - phys
> +  - phy-names
> +  - reset-gpios
> +  - num-lanes
> +  - linux,pci-domain
> +  - interrupts
> +  - interrupt-map
> +  - interrupt-map-mask
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pcie10:pcie@d0e00000 {
> +      compatible = "intel,lgm-pcie";
> +      device_type = "pci";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      reg = <
> +            0xd0e00000 0x1000
> +            0xd2000000 0x800000
> +            0xd0a41000 0x1000
> +            >;
> +      reg-names = "dbi", "config", "app";
> +      linux,pci-domain = <0>;
> +      max-link-speed = <4>;
> +      bus-range = <0x00 0x08>;
> +      interrupt-parent = <&ioapic1>;
> +      interrupts = <67 1>;
> +      #interrupt-cells = <1>;
> +      interrupt-map-mask = <0 0 0 0x7>;
> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> +                      <0 0 0 2 &ioapic1 28 1>,
> +                      <0 0 0 3 &ioapic1 29 1>,
> +                      <0 0 0 4 &ioapic1 30 1>;
> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
> +      resets = <&rcu0 0x50 0>;
> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
> +      phys = <&cb0phy0>;
> +      phy-names = "pciephy";
> +      status = "okay";
> +      reset-assert-ms = <500>;
> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> +      num-lanes = <2>;
> +    };

  reply index

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-04 10:10 [PATCH v3 0/2] PCI: Add Intel PCIe Driver and respective dt-binding yaml file Dilip Kota
2019-09-04 10:10 ` [PATCH v3 1/2] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller Dilip Kota
2019-09-05  2:23   ` Chuan Hua, Lei [this message]
2019-09-06 10:39     ` Dilip Kota
2019-09-05 20:31   ` Martin Blumenstingl
2019-09-06  3:22     ` Chuan Hua, Lei
2019-09-06 17:17       ` Martin Blumenstingl
2019-09-06 17:48         ` Andy Shevchenko
2019-09-07  1:48           ` Ivan Gorinov
2019-09-06  9:19     ` Andy Shevchenko
2019-09-09  6:52       ` Dilip Kota
2019-09-17 18:33       ` Rob Herring
2019-09-18  6:48         ` Dilip Kota
2019-09-17 18:40   ` Rob Herring
2019-09-18  6:56     ` Dilip Kota
     [not found]       ` <b7e549bb-b46c-c393-50ac-9ef3b198fd49@linux.intel.com>
2019-10-03  6:35         ` Fwd: " Dilip Kota
2019-09-04 10:10 ` [PATCH v3 2/2] dwc: PCI: intel: Intel PCIe RC controller driver Dilip Kota
2019-09-04 13:05   ` Andy Shevchenko
2019-09-06 10:39     ` Dilip Kota
2019-09-05  2:30   ` Chuan Hua, Lei
2019-09-05 10:45   ` Andrew Murray
2019-09-05 11:26     ` Christoph Hellwig
2019-09-05 11:40     ` Andy Shevchenko
2019-09-12  7:01       ` Dilip Kota
2019-09-06 10:58     ` Dilip Kota
2019-09-06 11:20       ` Andrew Murray
2019-09-09  6:51         ` Dilip Kota
2019-09-09  8:31           ` Andrew Murray
2019-09-10  8:08             ` Dilip Kota
     [not found]             ` <22857835-1f98-b251-c94b-16b4b0a6dba2@linux.intel.com>
2019-09-11 10:30               ` Andrew Murray
2019-09-12  6:58                 ` Dilip Kota
2019-09-12  8:25                   ` Andrew Murray
2019-09-12  9:23                     ` Dilip Kota
2019-09-12 10:49                       ` Gustavo Pimentel
2019-09-13  9:20                         ` Dilip Kota
2019-09-13 10:12                           ` andriy.shevchenko
2019-09-16  3:03                             ` Dilip Kota

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54ec6a30-69d8-a4af-95fa-2f457d605142@linux.intel.com \
    --to=chuanhua.lei@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eswara.kota@linux.intel.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hch@infradead.org \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=qi-ming.wu@intel.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox