linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: linux-rockchip@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Peter Geis <pgwipeout@gmail.com>
Cc: Peter Geis <pgwipeout@gmail.com>, Marc Zyngier <maz@kernel.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v9 4/5] arm64: dts: rockchip: Add rk3568 PCIe2x1 controller
Date: Sun, 15 May 2022 21:17:11 +0200	[thread overview]
Message-ID: <5575428.DvuYhMxLoT@diego> (raw)
In-Reply-To: <20220429123832.2376381-5-pgwipeout@gmail.com>

Am Freitag, 29. April 2022, 14:38:30 CEST schrieb Peter Geis:
> The PCIe2x1 controller is common between the rk3568 and rk3566. It is a
> single lane PCIe2 compliant controller.
> 
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 52 ++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 7cdef800cb3c..aea5d9255235 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -689,6 +689,58 @@ qos_vop_m1: qos@fe1a8100 {
>  		reg = <0x0 0xfe1a8100 0x0 0x20>;
>  	};
>  
> +	pcie2x1: pcie@fe260000 {
> +		compatible = "rockchip,rk3568-pcie";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		bus-range = <0x0 0xf>;
> +		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
> +			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
> +			 <&cru CLK_PCIE20_AUX_NDFT>;
> +		clock-names = "aclk_mst", "aclk_slv",
> +			      "aclk_dbi", "pclk", "aux";
> +		device_type = "pci";
> +		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "sys", "pmc", "msi", "legacy", "err";
> +		#interrupt-cells = <1>;

I guess #interrupt-cells shouldn't be necessary here, as that property
is meant for interrupt-controller nodes - like the subnode here
which already has its own #interrupt-cells, right?

> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0 0 0 1 &pcie_intc 0>,
> +				<0 0 0 2 &pcie_intc 1>,
> +				<0 0 0 3 &pcie_intc 2>,
> +				<0 0 0 4 &pcie_intc 3>;
> +		linux,pci-domain = <0>;
> +		num-ib-windows = <6>;
> +		num-ob-windows = <2>;
> +		max-link-speed = <2>;
> +		msi-map = <0x0 &gic 0x0 0x1000>;
> +		num-lanes = <1>;
> +		phys = <&combphy2 PHY_TYPE_PCIE>;
> +		phy-names = "pcie-phy";
> +		power-domains = <&power RK3568_PD_PIPE>;
> +		reg = <0x3 0xc0000000 0x0 0x00400000>,
> +		      <0x0 0xfe260000 0x0 0x00010000>,
> +		      <0x3 0x00000000 0x0 0x01000000>;
> +		ranges = <0x01000000 0x0 0x01000000 0x3 0x01000000 0x0 0x00100000
> +			  0x02000000 0x0 0x02000000 0x3 0x01100000 0x0 0x3ef00000>;
> +		reg-names = "dbi", "apb", "config";
> +		resets = <&cru SRST_PCIE20_POWERUP>;
> +		reset-names = "pipe";
> +		status = "disabled";
> +
> +		pcie_intc: legacy-interrupt-controller {
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-controller;
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
> +		};
> +
> +	};
> +
>  	sdmmc0: mmc@fe2b0000 {
>  		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
>  		reg = <0x0 0xfe2b0000 0x0 0x4000>;
> 





  reply	other threads:[~2022-05-15 19:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-29 12:38 [PATCH v9 0/5] Enable rk356x PCIe controller Peter Geis
2022-04-29 12:38 ` [PATCH v9 1/5] dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding Peter Geis
2022-04-29 12:38 ` [PATCH v9 2/5] PCI: rockchip-dwc: Reset core at driver probe Peter Geis
2022-05-11 13:50   ` Lorenzo Pieralisi
2022-05-11 14:26     ` Peter Geis
2022-05-11 15:00       ` Lorenzo Pieralisi
2022-05-11 15:23         ` Heiko Stübner
2022-04-29 12:38 ` [PATCH v9 3/5] PCI: rockchip-dwc: Add legacy interrupt support Peter Geis
2022-04-29 18:07   ` Marc Zyngier
2022-04-29 12:38 ` [PATCH v9 4/5] arm64: dts: rockchip: Add rk3568 PCIe2x1 controller Peter Geis
2022-05-15 19:17   ` Heiko Stübner [this message]
2022-04-29 12:38 ` [PATCH v9 5/5] arm64: dts: rockchip: Enable PCIe controller on quartz64-a Peter Geis
2022-05-10 21:11 ` [PATCH v9 0/5] Enable rk356x PCIe controller Peter Geis
2022-05-10 21:15   ` Heiko Stübner
2022-05-11 15:15 ` (subset) " Lorenzo Pieralisi
2022-05-15 19:47 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5575428.DvuYhMxLoT@diego \
    --to=heiko@sntech.de \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=pgwipeout@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).