[PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

This patchset adds support for following features:

1. Error Disconnect Recover (EDR) support.
2. _OSC based negotiation support for DPC.

You can find EDR spec in the following link.

https://members.pcisig.com/wg/PCI-SIG/document/12614

Changes since v5:
 * Addressed Keith's comments.
 * Added additional check for FF mode in pci_aer_init().
 * Updated commit history of "PCI/DPC: Add support for DPC recovery on NON_FATAL errors" patch.

Changes since v4:
 * Rebased on top of v5.3-rc1
 * Fixed lock/unlock issue in edr_handle_event().
 * Merged "Update error status after reset_link()" patch into this patchset.

Changes since v3:
 * Moved EDR related ACPI functions/definitions to pci-acpi.c
 * Modified commit history in few patches to include spec reference.
 * Added support to handle DPC triggered by NON_FATAL errors.
 * Added edr_lock to protect PCI device receiving duplicate EDR notifications.
 * Addressed Bjorn comments.

Changes since v2:
 * Split EDR support patch into multiple patches.
 * Addressed Bjorn comments.

Changes since v1:
 * Rebased on top of v5.1-rc1

Kuppuswamy Sathyanarayanan (9):
  PCI/ERR: Update error status after reset_link()
  PCI/ACPI: Add _OSC based negotiation support for DPC
  PCI/ACPI: Expose EDR support via _OSC to BIOS
  PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled
  PCI/DPC: Add dpc_process_error() wrapper function
  PCI/DPC: Add Error Disconnect Recover (EDR) support
  PCI/AER: Allow clearing Error Status Register in FF mode
  PCI/DPC: Update comments related to DPC recovery on NON_FATAL errors
  PCI/DPC: Clear AER registers in EDR mode

 drivers/acpi/pci_root.c         |   9 ++
 drivers/pci/pci-acpi.c          |  91 +++++++++++++++
 drivers/pci/pcie/Kconfig        |  10 ++
 drivers/pci/pcie/aer.c          |  12 +-
 drivers/pci/pcie/dpc.c          | 196 +++++++++++++++++++++++++++++---
 drivers/pci/pcie/err.c          |  11 +-
 drivers/pci/pcie/portdrv_core.c |   8 +-
 drivers/pci/probe.c             |   1 +
 include/linux/acpi.h            |   4 +-
 include/linux/pci-acpi.h        |  11 ++
 include/linux/pci.h             |   2 +-
 11 files changed, 322 insertions(+), 33 deletions(-)

-- 
2.21.0

[PATCH v6 1/9] PCI/ERR: Update error status after reset_link()

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But, if the reset is
successful there is no need to continue the rest of the error recovery
checks. Also, during fatal error recovery, if the initial value of error
status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
even after successful recovery (using reset_link()) pcie_do_recovery()
will report the recovery result as failure. So update the status of
error after reset_link().

Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/err.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 773197a12568..aecec124a829 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	else
 		pci_walk_bus(bus, report_normal_detected, &status);
 
-	if (state == pci_channel_io_frozen &&
-	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
-		goto failed;
+	if (state == pci_channel_io_frozen) {
+		status = reset_link(dev, service);
+		if (status != PCI_ERS_RESULT_RECOVERED)
+			goto failed;
+		else
+			goto done;
+	}
 
 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
 		status = PCI_ERS_RESULT_RECOVERED;
@@ -228,6 +232,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	if (status != PCI_ERS_RESULT_RECOVERED)
 		goto failed;
 
+done:
 	pci_dbg(dev, "broadcast resume message\n");
 	pci_walk_bus(bus, report_resume, &status);
 
-- 
2.21.0

[PATCH v6 2/9] PCI/ACPI: Add _OSC based negotiation support for DPC

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, sec 4.5.1, table 4-6, OS can use bit 7 of _OSC
Control Field to negotiate control over Downstream Port Containment
(DPC) configuration of PCIe port.

After _OSC negotiation, firmware will Set this bit to grant OS control
over PCIe DPC configuration and Clear it if this feature was requested
and denied, or was not requested.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/acpi/pci_root.c         | 6 ++++++
 drivers/pci/pcie/portdrv_core.c | 3 ++-
 drivers/pci/probe.c             | 1 +
 include/linux/acpi.h            | 3 ++-
 include/linux/pci.h             | 2 +-
 5 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 314a187ed572..73b08f40b0da 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -142,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
 	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
 	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
 	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
+	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
 };
 
 static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
@@ -488,6 +489,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 			control |= OSC_PCI_EXPRESS_AER_CONTROL;
 	}
 
+	if (IS_ENABLED(CONFIG_PCIE_DPC))
+		control |= OSC_PCI_EXPRESS_DPC_CONTROL;
+
 	requested = control;
 	status = acpi_pci_osc_control_set(handle, &control,
 					  OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
@@ -917,6 +921,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
 		host_bridge->native_pme = 0;
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
 		host_bridge->native_ltr = 0;
+	if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
+		host_bridge->native_dpc = 0;
 
 	/*
 	 * Evaluate the "PCI Boot Configuration" _DSM Function.  If it
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 308c3e0c4a34..58c40fe7856f 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -252,7 +252,8 @@ static int get_port_device_capability(struct pci_dev *dev)
 	}
 
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
-	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
+	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
+	    (pcie_ports_native || host->native_dpc))
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index a3c7338fad86..cf8acdd62089 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -601,6 +601,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_shpc_hotplug = 1;
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
+	bridge->native_dpc = 1;
 }
 
 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 9426b9aaed86..8959ed322e15 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -525,7 +525,8 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_EXPRESS_AER_CONTROL		0x00000008
 #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
 #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
-#define OSC_PCI_CONTROL_MASKS			0x0000003f
+#define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
+#define OSC_PCI_CONTROL_MASKS			0x000000ff
 
 #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
 #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 9e700d9f9f28..9145136ca728 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -510,7 +510,7 @@ struct pci_host_bridge {
 	unsigned int	native_pme:1;		/* OS may use PCIe PME */
 	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
 	unsigned int	preserve_config:1;	/* Preserve FW resource setup */
-
+	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */
 	/* Resource alignment requirements */
 	resource_size_t (*align_resource)(struct pci_dev *dev,
 			const struct resource *res,
-- 
2.21.0

[PATCH v6 3/9] PCI/ACPI: Expose EDR support via _OSC to BIOS

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, sec 4.5.1, table 4-4, if OS supports EDR,
it should expose its support to BIOS by setting bit 7 of _OSC Support
Field.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/acpi/pci_root.c | 3 +++
 include/linux/acpi.h    | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 73b08f40b0da..988d09d788b6 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -132,6 +132,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
 	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
 	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
 	{ OSC_PCI_MSI_SUPPORT, "MSI" },
+	{ OSC_PCI_EDR_SUPPORT, "EDR" },
 	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
 };
 
@@ -442,6 +443,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
 	if (pci_msi_enabled())
 		support |= OSC_PCI_MSI_SUPPORT;
+	if (IS_ENABLED(CONFIG_PCIE_EDR))
+		support |= OSC_PCI_EDR_SUPPORT;
 
 	decode_osc_support(root, "OS supports", support);
 	status = acpi_pci_osc_support(root, support);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 8959ed322e15..b6b43da85d26 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -515,6 +515,7 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_CLOCK_PM_SUPPORT		0x00000004
 #define OSC_PCI_SEGMENT_GROUPS_SUPPORT		0x00000008
 #define OSC_PCI_MSI_SUPPORT			0x00000010
+#define OSC_PCI_EDR_SUPPORT			0x00000080
 #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
 #define OSC_PCI_SUPPORT_MASKS			0x0000011f
 
-- 
2.21.0

[PATCH v6 4/9] PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per ACPI specification v6.3, sec 5.6.6, Error Disconnect Recover
(EDR) notification used by firmware to let OS know about the DPC event
and permit OS to perform error recovery when processing the EDR
notification. Also, as per PCI firmware specification r3.2 Downstream
Port Containment Related Enhancements ECN, sec 4.5.1, table 4-6, if DPC
is controlled by firmware (firmware first mode), it's responsible for
initializing Downstream Port Containment Extended Capability Structures
per firmware policy. And, OS is permitted to read or write DPC Control
and Status registers of a port while processing an Error Disconnect
Recover (EDR) notification from firmware on that port.

Currently, if firmware controls DPC (firmware first mode), OS will not
create/enumerate DPC PCIe port services. But, if OS supports EDR
feature, then as mentioned in above spec references, it should permit
enumeration of DPC driver and also support handling ACPI EDR
notification. So as first step, allow dpc_probe() to continue even if
firmware first mode is enabled. Also add appropriate checks to ensure
device registers are not modified outside EDR notification window in
firmware first mode. This is a preparatory patch for adding EDR support.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/dpc.c | 49 +++++++++++++++++++++++++++++++-----------
 1 file changed, 36 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index a32ec3487a8d..9717fda012f8 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -22,6 +22,8 @@ struct dpc_dev {
 	u16			cap_pos;
 	bool			rp_extensions;
 	u8			rp_log_size;
+	/* Set True if DPC is controlled by firmware */
+	bool			firmware_dpc;
 };
 
 static const char * const rp_pio_error_string[] = {
@@ -69,6 +71,9 @@ void pci_save_dpc_state(struct pci_dev *dev)
 	if (!dpc)
 		return;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
@@ -90,6 +95,9 @@ void pci_restore_dpc_state(struct pci_dev *dev)
 	if (!dpc)
 		return;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
@@ -291,9 +299,6 @@ static int dpc_probe(struct pcie_device *dev)
 	int status;
 	u16 ctl, cap;
 
-	if (pcie_aer_get_firmware_first(pdev))
-		return -ENOTSUPP;
-
 	dpc = devm_kzalloc(device, sizeof(*dpc), GFP_KERNEL);
 	if (!dpc)
 		return -ENOMEM;
@@ -302,13 +307,25 @@ static int dpc_probe(struct pcie_device *dev)
 	dpc->dev = dev;
 	set_service_data(dev, dpc);
 
-	status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
-					   dpc_handler, IRQF_SHARED,
-					   "pcie-dpc", dpc);
-	if (status) {
-		pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
-			 status);
-		return status;
+	if (pcie_aer_get_firmware_first(pdev))
+		dpc->firmware_dpc = 1;
+
+	/*
+	 * If DPC is handled in firmware and ACPI support is not enabled
+	 * in OS, skip probe and return error.
+	 */
+	if (dpc->firmware_dpc && !IS_ENABLED(CONFIG_ACPI))
+		return -ENODEV;
+
+	if (!dpc->firmware_dpc) {
+		status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
+						   dpc_handler, IRQF_SHARED,
+						   "pcie-dpc", dpc);
+		if (status) {
+			pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
+				 status);
+			return status;
+		}
 	}
 
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
@@ -323,9 +340,12 @@ static int dpc_probe(struct pcie_device *dev)
 			dpc->rp_log_size = 0;
 		}
 	}
-
-	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
-	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
+	if (!dpc->firmware_dpc) {
+		ctl = (ctl & 0xfff4) |
+			(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
+		pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL,
+				      ctl);
+	}
 
 	pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
 		 cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
@@ -343,6 +363,9 @@ static void dpc_remove(struct pcie_device *dev)
 	struct pci_dev *pdev = dev->port;
 	u16 ctl;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
 	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
 	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
-- 
2.21.0

[PATCH v6 5/9] PCI/DPC: Add dpc_process_error() wrapper function

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

With Error Disconnect Recover (EDR) support, we need to support
processing DPC event either from DPC IRQ or ACPI EDR event. So create
a wrapper function dpc_process_error() and move common error handling
code in to it. It will be used to process the DPC event in both DPC IRQ
and EDR ACPI event contexts.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/dpc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 9717fda012f8..4137ec7b48cc 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -232,10 +232,9 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
 	return 1;
 }
 
-static irqreturn_t dpc_handler(int irq, void *context)
+static void dpc_process_error(struct dpc_dev *dpc)
 {
 	struct aer_err_info info;
-	struct dpc_dev *dpc = context;
 	struct pci_dev *pdev = dpc->dev->port;
 	u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
 
@@ -268,6 +267,13 @@ static irqreturn_t dpc_handler(int irq, void *context)
 
 	/* We configure DPC so it only triggers on ERR_FATAL */
 	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
+}
+
+static irqreturn_t dpc_handler(int irq, void *context)
+{
+	struct dpc_dev *dpc = context;
+
+	dpc_process_error(dpc);
 
 	return IRQ_HANDLED;
 }
-- 
2.21.0

[PATCH v6 6/9] PCI/DPC: Add Error Disconnect Recover (EDR) support

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per ACPI specification r6.3, sec 5.6.6, when firmware owns Downstream
Port Containment (DPC), its expected to use the "Error Disconnect
Recover" (EDR) notification to alert OSPM of a DPC event and if OS
supports EDR, its expected to handle the software state invalidation and
port recovery in OS, and also let firmware know the recovery status via
_OST ACPI call. Related _OST status codes can be found in ACPI
specification r6.3, sec 6.3.5.2.

Also, as per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, sec 4.5.1, table 4-6, If DPC is controlled by
firmware (firmware first mode), firmware is responsible for
configuring the DPC and OS is responsible for error recovery. Also, OS
is allowed to modify DPC registers only during the EDR notification
window. So with EDR support, OS should provide DPC port services even in
firmware first mode.

Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pci-acpi.c          |  91 +++++++++++++++++++++++
 drivers/pci/pcie/Kconfig        |  10 +++
 drivers/pci/pcie/dpc.c          | 127 +++++++++++++++++++++++++++++++-
 drivers/pci/pcie/portdrv_core.c |   9 ++-
 include/linux/pci-acpi.h        |  11 +++
 5 files changed, 245 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 45049f558860..82abab25daf2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -104,6 +104,97 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
 }
 #endif
 
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+
+/*
+ * _DSM wrapper function to enable/disable DPC port.
+ * @dpc   : DPC device structure
+ * @enable: status of DPC port (0 or 1).
+ *
+ * returns 0 on success or errno on failure.
+ */
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle, bool enable)
+{
+	union acpi_object *obj;
+	int status = 0;
+	union acpi_object argv4;
+
+	argv4.type = ACPI_TYPE_INTEGER;
+	argv4.integer.value = enable;
+
+	obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+				EDR_PORT_ENABLE_DSM, &argv4);
+	if (!obj)
+		return -EIO;
+
+	if (obj->type != ACPI_TYPE_INTEGER || obj->integer.value != enable)
+		status = -EIO;
+
+	ACPI_FREE(obj);
+
+	return status;
+}
+
+/*
+ * _DSM wrapper function to locate DPC port.
+ * @dpc   : DPC device structure
+ *
+ * returns pci_dev or NULL.
+ */
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev, acpi_handle handle)
+{
+	union acpi_object *obj;
+	u16 port;
+
+	obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+				EDR_PORT_LOCATE_DSM, NULL);
+	if (!obj)
+		return pci_dev_get(pdev);
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_FREE(obj);
+		return NULL;
+	}
+
+	/*
+	 * Firmware returns DPC port BDF details in following format:
+	 *	15:8 = bus
+	 *	7:3 = device
+	 *	2:0 = function
+	 */
+	port = obj->integer.value;
+
+	ACPI_FREE(obj);
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+					   PCI_BUS_NUM(port), port & 0xff);
+}
+
+/*
+ * _OST wrapper function to let firmware know the status of EDR event.
+ * @dpc   : DPC device structure.
+ * @status: Status of EDR event.
+ */
+int acpi_send_edr_status(struct pci_dev *pdev,  acpi_handle handle, u16 status)
+{
+	u32 ost_status;
+
+	pci_dbg(pdev, "Sending EDR status :%x\n", status);
+
+	ost_status =  PCI_DEVID(pdev->bus->number, pdev->devfn);
+	ost_status = (ost_status << 16) | status;
+
+	status = acpi_evaluate_ost(handle,
+				   ACPI_NOTIFY_DISCONNECT_RECOVER,
+				   ost_status, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+#endif /* CONFIG_PCIE_DPC && CONFIG_ACPI */
+
 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
 {
 	acpi_status status = AE_NOT_EXIST;
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 362eb8cfa53b..9a05015af7cd 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -150,3 +150,13 @@ config PCIE_BW
 	  This enables PCI Express Bandwidth Change Notification.  If
 	  you know link width or rate changes occur only to correct
 	  unreliable links, you may answer Y.
+
+config PCIE_EDR
+	bool "PCI Express Error Disconnect Recover support"
+	default n
+	depends on PCIE_DPC && ACPI
+	help
+	  This options adds Error Disconnect Recover support as specified
+	  in PCI firmware specification v3.2 Downstream Port Containment
+	  Related Enhancements ECN. Enable this if you want to support hybrid
+	  DPC model which uses both firmware and OS to implement DPC.
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 4137ec7b48cc..6e350149d793 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -13,6 +13,8 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
 
 #include "portdrv.h"
 #include "../pci.h"
@@ -24,6 +26,11 @@ struct dpc_dev {
 	u8			rp_log_size;
 	/* Set True if DPC is controlled by firmware */
 	bool			firmware_dpc;
+	pci_ers_result_t	error_state;
+	struct mutex		edr_lock;
+#ifdef CONFIG_ACPI
+	struct acpi_device	*adev;
+#endif
 };
 
 static const char * const rp_pio_error_string[] = {
@@ -152,6 +159,9 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	if (!pcie_wait_for_link(pdev, true))
 		return PCI_ERS_RESULT_DISCONNECT;
 
+	/* Since the device recovery is done just update the error state */
+	dpc->error_state = PCI_ERS_RESULT_RECOVERED;
+
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
@@ -296,13 +306,92 @@ static irqreturn_t dpc_irq(int irq, void *context)
 	return IRQ_HANDLED;
 }
 
+static void dpc_error_resume(struct pci_dev *dev)
+{
+	struct dpc_dev *dpc = to_dpc_dev(dev);
+
+	dpc->error_state = PCI_ERS_RESULT_RECOVERED;
+}
+
+#ifdef CONFIG_ACPI
+
+static void edr_handle_event(acpi_handle handle, u32 event, void *data)
+{
+	struct dpc_dev *dpc = (struct dpc_dev *) data;
+	struct pci_dev *pdev = dpc->dev->port;
+	u16 status;
+
+	pci_info(pdev, "ACPI event %x received\n", event);
+
+	if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
+		return;
+
+	/*
+	 * Check if _DSM(0xD) is available, and if present locate the
+	 * port which issued EDR event.
+	 */
+	pdev = acpi_locate_dpc_port(pdev, dpc->adev->handle);
+	if (!pdev) {
+		pdev = dpc->dev->port;
+		pci_err(pdev, "No valid port found\n");
+		return;
+	}
+
+	dpc = to_dpc_dev(pdev);
+	if (!dpc) {
+		pci_err(pdev, "DPC port is NULL\n");
+		goto done;
+	}
+
+	mutex_lock(&dpc->edr_lock);
+
+	dpc->error_state = PCI_ERS_RESULT_DISCONNECT;
+
+	/*
+	 * Check if the port supports DPC:
+	 *
+	 * If port supports DPC, then fall back to default error
+	 * recovery.
+	 */
+	if (dpc->cap_pos) {
+		/* Check if there is a valid DPC trigger */
+		pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS,
+				     &status);
+		if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
+			pci_err(pdev, "Invalid DPC trigger %x\n", status);
+			goto edr_unlock;
+		}
+		dpc_process_error(dpc);
+	}
+
+	/*
+	 * If recovery is successful, send _OST(0xF, BDF << 16 | 0x80)
+	 * to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
+	 */
+	if (dpc->error_state == PCI_ERS_RESULT_RECOVERED)
+		status = 0x80;
+	else
+		status = 0x81;
+
+	acpi_send_edr_status(pdev, dpc->adev->handle, status);
+
+edr_unlock:
+	mutex_unlock(&dpc->edr_lock);
+done:
+	pci_dev_put(pdev);
+
+	return;
+}
+
+#endif
+
 #define FLAG(x, y) (((x) & (y)) ? '+' : '-')
 static int dpc_probe(struct pcie_device *dev)
 {
 	struct dpc_dev *dpc;
 	struct pci_dev *pdev = dev->port;
 	struct device *device = &dev->device;
-	int status;
+	int status = 0;
 	u16 ctl, cap;
 
 	dpc = devm_kzalloc(device, sizeof(*dpc), GFP_KERNEL);
@@ -312,6 +401,8 @@ static int dpc_probe(struct pcie_device *dev)
 	dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
 	dpc->dev = dev;
 	set_service_data(dev, dpc);
+	dpc->error_state = PCI_ERS_RESULT_NONE;
+	mutex_init(&dpc->edr_lock);
 
 	if (pcie_aer_get_firmware_first(pdev))
 		dpc->firmware_dpc = 1;
@@ -334,6 +425,39 @@ static int dpc_probe(struct pcie_device *dev)
 		}
 	}
 
+#ifdef CONFIG_ACPI
+	if (dpc->firmware_dpc) {
+		struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+		acpi_status astatus;
+
+		if (!adev) {
+			pci_err(pdev, "No valid ACPI device found\n");
+			return -ENODEV;
+		}
+
+		dpc->adev = adev;
+
+		astatus = acpi_install_notify_handler(adev->handle,
+						      ACPI_SYSTEM_NOTIFY,
+						      edr_handle_event,
+						      dpc);
+
+		if (ACPI_FAILURE(astatus)) {
+			pci_err(pdev,
+				"Install ACPI_SYSTEM_NOTIFY handler failed\n");
+			return -EBUSY;
+		}
+
+		status = acpi_enable_dpc_port(pdev, adev->handle, true);
+		if (status) {
+			pci_err(pdev, "Enable DPC port failed\n");
+			acpi_remove_notify_handler(adev->handle,
+						   ACPI_SYSTEM_NOTIFY,
+						   edr_handle_event);
+			return status;
+		}
+	}
+#endif
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
 
@@ -384,6 +508,7 @@ static struct pcie_port_service_driver dpcdriver = {
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
 	.reset_link	= dpc_reset_link,
+	.error_resume   = dpc_error_resume,
 };
 
 int __init pcie_dpc_init(void)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 58c40fe7856f..acf3a9ec2227 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -251,9 +251,14 @@ static int get_port_device_capability(struct pci_dev *dev)
 		pcie_pme_interrupt_enable(dev, false);
 	}
 
+	/*
+	 * If EDR support is enabled in OS, then even if AER is not handled in
+	 * OS, DPC service can be enabled.
+	 */
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
-	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
-	    (pcie_ports_native || host->native_dpc))
+	    ((IS_ENABLED(CONFIG_PCIE_EDR) && !host->native_dpc) ||
+	    (pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
+	    (pcie_ports_native || host->native_dpc))))
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 62b7fdcc661c..36ffe1e16e69 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -117,6 +117,17 @@ static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
 static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
 #endif	/* CONFIG_ACPI */
 
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+#define EDR_PORT_ENABLE_DSM     0x0C
+#define EDR_PORT_LOCATE_DSM     0x0D
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle,
+			 bool enable);
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev,
+				     acpi_handle handle);
+int acpi_send_edr_status(struct pci_dev *pdev,
+			 acpi_handle handle, u16 status);
+#endif
+
 #ifdef CONFIG_ACPI_APEI
 extern bool aer_acpi_firmware_first(void);
 #else
-- 
2.21.0

[PATCH v6 7/9] PCI/AER: Allow clearing Error Status Register in FF mode

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, sec 4.5.1, table 4-6, Error Disconnect
Recover (EDR) support allows OS to handle error recovery and
clearing Error Registers even in FF mode. So remove FF mode checks in
pci_cleanup_aer_uncorrect_error_status(), pci_aer_clear_fatal_status()
and pci_cleanup_aer_error_status_regs() functions.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/aer.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index b45bc47d04fe..e1509bb900c5 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -383,9 +383,6 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 	if (!pos)
 		return -EIO;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return -EIO;
-
 	/* Clear status bits for ERR_NONFATAL errors only */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
@@ -406,9 +403,6 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
 	if (!pos)
 		return;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return;
-
 	/* Clear status bits for ERR_FATAL errors only */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
@@ -430,9 +424,6 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
 	if (!pos)
 		return -EIO;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return -EIO;
-
 	port_type = pci_pcie_type(dev);
 	if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
 		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
@@ -455,7 +446,8 @@ void pci_aer_init(struct pci_dev *dev)
 	if (dev->aer_cap)
 		dev->aer_stats = kzalloc(sizeof(struct aer_stats), GFP_KERNEL);
 
-	pci_cleanup_aer_error_status_regs(dev);
+	if (!pcie_aer_get_firmware_first(dev))
+		pci_cleanup_aer_error_status_regs(dev);
 }
 
 void pci_aer_exit(struct pci_dev *dev)
-- 
2.21.0

[PATCH v6 8/9] PCI/DPC: Update comments related to DPC recovery on NON_FATAL errors

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Currently, in native mode, DPC driver is configured to trigger DPC only
for FATAL errors and hence it only supports port recovery for FATAL
errors. But with Error Disconnect Recover (EDR) support, DPC
configuration is done by firmware, and hence we should expect DPC
triggered for both FATAL/NON_FATAL errors. So update comments and add
details about how NON_FATAL dpc recovery is handled.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/dpc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 6e350149d793..369df422692f 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -275,7 +275,11 @@ static void dpc_process_error(struct dpc_dev *dpc)
 		pci_aer_clear_fatal_status(pdev);
 	}
 
-	/* We configure DPC so it only triggers on ERR_FATAL */
+	/*
+	 * Irrespective of whether the DPC event is triggered by
+	 * ERR_FATAL or ERR_NONFATAL, since the link is already down,
+	 * use the FATAL error recovery path for both cases.
+	 */
 	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
 }
 
-- 
2.21.0

[PATCH v6 9/9] PCI/DPC: Clear AER registers in EDR mode

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, OS is responsible for clearing the AER
registers in EDR mode. So clear AER registers in dpc_process_error()
function.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/pcie/dpc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 369df422692f..115590ad10ed 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -275,6 +275,10 @@ static void dpc_process_error(struct dpc_dev *dpc)
 		pci_aer_clear_fatal_status(pdev);
 	}
 
+	/* In EDR mode, OS is responsible for clearing AER registers */
+	if (dpc->firmware_dpc)
+		pci_cleanup_aer_error_status_regs(pdev);
+
 	/*
 	 * Irrespective of whether the DPC event is triggered by
 	 * ERR_FATAL or ERR_NONFATAL, since the link is already down,
-- 
2.21.0

Re: [PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[Keith Busch]

On Fri, Jul 26, 2019 at 02:43:10PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> This patchset adds support for following features:
> 
> 1. Error Disconnect Recover (EDR) support.
> 2. _OSC based negotiation support for DPC.
> 
> You can find EDR spec in the following link.
> 
> https://members.pcisig.com/wg/PCI-SIG/document/12614

Thank you for sticking with this. I've reviewed the series and I think
this looks good for the next merge window.

Acked-by: Keith Busch <keith.busch@intel.com>

Re: [PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[sathyanarayanan kuppuswamy]

+Austin , Huong

On 7/26/19 2:53 PM, Keith Busch wrote:
> On Fri, Jul 26, 2019 at 02:43:10PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> This patchset adds support for following features:
>>
>> 1. Error Disconnect Recover (EDR) support.
>> 2. _OSC based negotiation support for DPC.
>>
>> You can find EDR spec in the following link.
>>
>> https://members.pcisig.com/wg/PCI-SIG/document/12614
> Thank you for sticking with this. I've reviewed the series and I think
> this looks good for the next merge window.
>
> Acked-by: Keith Busch <keith.busch@intel.com>
>
-- 
Sathyanarayanan Kuppuswamy
Linux kernel developer

Re: [PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[Austin.Bolen]

On 7/26/2019 6:33 PM, sathyanarayanan kuppuswamy wrote:
> +Austin , Huong
>
> On 7/26/19 2:53 PM, Keith Busch wrote:
>> On Fri, Jul 26, 2019 at 02:43:10PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>>
>>> This patchset adds support for following features:
>>>
>>> 1. Error Disconnect Recover (EDR) support.
>>> 2. _OSC based negotiation support for DPC.
>>>
>>> You can find EDR spec in the following link.
>>>
>>> https://members.pcisig.com/wg/PCI-SIG/document/12614
>> Thank you for sticking with this. I've reviewed the series and I think
>> this looks good for the next merge window.
>>
>> Acked-by: Keith Busch <keith.busch@intel.com>

Tested on a DPC-enabled PCIe switch (Broadcom PEX9733) in a Dell
PowerEdge R740xd.  Injected fatal and non-fatal errors on an NVMe
endpoint below the switch and on the switch downstream port itself and
verified errors were contained and then recovered at the PCIe level.

Tested-by: Austin Bolen <Austin.Bolen@dell.com‎>

>>

RE: [PATCH v6 0/9] Add Error Disconnect Recover (EDR) support

[Huong.Nguyen]

-----Original Message-----
From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com> 
Sent: Friday, July 26, 2019 6:31 PM
To: Keith Busch
Cc: bhelgaas@google.com; linux-pci@vger.kernel.org; linux-kernel@vger.kernel.org; ashok.raj@intel.com; keith.busch@intel.com; Bolen, Austin; Nguyen, Huong
Subject: Re: [PATCH v6 0/9] Add Error Disconnect Recover (EDR) support


[EXTERNAL EMAIL] 

+Austin , Huong

On 7/26/19 2:53 PM, Keith Busch wrote:
> On Fri, Jul 26, 2019 at 02:43:10PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan 
>> <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> This patchset adds support for following features:
>>
>> 1. Error Disconnect Recover (EDR) support.
>> 2. _OSC based negotiation support for DPC.
>>
>> You can find EDR spec in the following link.
>>
>> https://members.pcisig.com/wg/PCI-SIG/document/12614
> Thank you for sticking with this. I've reviewed the series and I think 
> this looks good for the next merge window.
>
> Acked-by: Keith Busch <keith.busch@intel.com>

Tested on a DPC-enabled PCIe switch (Broadcom PEX9733) in a Dell PowerEdge R740xd.  Injected fatal and non-fatal errors on an NVMe endpoint below the switch and on the switch downstream port itself and verified errors were contained and then recovered at the PCIe level.

Tested-by: Huong Nguyen <huong.nguyen@dell.com‎>
>
--
Sathyanarayanan Kuppuswamy
Linux kernel developer

Re: [PATCH v6 1/9] PCI/ERR: Update error status after reset_link()

[Bjorn Helgaas]

On Fri, Jul 26, 2019 at 02:43:11PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
> reset_link() to recover from fatal errors. But, if the reset is
> successful there is no need to continue the rest of the error recovery
> checks. Also, during fatal error recovery, if the initial value of error
> status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
> even after successful recovery (using reset_link()) pcie_do_recovery()
> will report the recovery result as failure. So update the status of
> error after reset_link().
> 
> Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
> Cc: Ashok Raj <ashok.raj@intel.com>
> Cc: Keith Busch <keith.busch@intel.com>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>  drivers/pci/pcie/err.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 773197a12568..aecec124a829 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>  	else
>  		pci_walk_bus(bus, report_normal_detected, &status);
>  
> -	if (state == pci_channel_io_frozen &&
> -	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
> -		goto failed;
> +	if (state == pci_channel_io_frozen) {
> +		status = reset_link(dev, service);
> +		if (status != PCI_ERS_RESULT_RECOVERED)
> +			goto failed;
> +		else
> +			goto done;

This will be easier to read without the negation, i.e.,

                if (status == PCI_ERS_RESULT_RECOVERED)
                        goto done;
                else
                        goto failed;

> +	}
>  
>  	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
>  		status = PCI_ERS_RESULT_RECOVERED;
> @@ -228,6 +232,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>  	if (status != PCI_ERS_RESULT_RECOVERED)
>  		goto failed;
>  
> +done:
>  	pci_dbg(dev, "broadcast resume message\n");
>  	pci_walk_bus(bus, report_resume, &status);
>  
> -- 
> 2.21.0
> 

Re: [PATCH v6 2/9] PCI/ACPI: Add _OSC based negotiation support for DPC

[Bjorn Helgaas]

On Fri, Jul 26, 2019 at 02:43:12PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> As per PCI firmware specification r3.2 Downstream Port Containment
> Related Enhancements ECN, sec 4.5.1, table 4-6, OS can use bit 7 of _OSC
> Control Field to negotiate control over Downstream Port Containment
> (DPC) configuration of PCIe port.
> 
> After _OSC negotiation, firmware will Set this bit to grant OS control
> over PCIe DPC configuration and Clear it if this feature was requested
> and denied, or was not requested.
> 
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Len Brown <lenb@kernel.org>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>  drivers/acpi/pci_root.c         | 6 ++++++
>  drivers/pci/pcie/portdrv_core.c | 3 ++-
>  drivers/pci/probe.c             | 1 +
>  include/linux/acpi.h            | 3 ++-
>  include/linux/pci.h             | 2 +-
>  5 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index 314a187ed572..73b08f40b0da 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -142,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
>  	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
>  	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
>  	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
> +	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
>  };
>  
>  static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
> @@ -488,6 +489,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
>  			control |= OSC_PCI_EXPRESS_AER_CONTROL;
>  	}
>  
> +	if (IS_ENABLED(CONFIG_PCIE_DPC))
> +		control |= OSC_PCI_EXPRESS_DPC_CONTROL;

Sec 4.5.2.4 says:

  If the OS sets bit 7 of the Control field, it must set bit 7 of the
  Support field, indicating support for the Error Disconnect Recover
  event.

I see that you do set bit 7 (OSC_PCI_EDR_SUPPORT) in the Support field
in a later patch, but I don't think we should have this intermediate
state where we set OSC_PCI_EXPRESS_DPC_CONTROL in Control but not
OSC_PCI_EDR_SUPPORT in Support.

>  	requested = control;
>  	status = acpi_pci_osc_control_set(handle, &control,
>  					  OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
> @@ -917,6 +921,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
>  		host_bridge->native_pme = 0;
>  	if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
>  		host_bridge->native_ltr = 0;
> +	if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
> +		host_bridge->native_dpc = 0;
>  
>  	/*
>  	 * Evaluate the "PCI Boot Configuration" _DSM Function.  If it
> diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
> index 308c3e0c4a34..58c40fe7856f 100644
> --- a/drivers/pci/pcie/portdrv_core.c
> +++ b/drivers/pci/pcie/portdrv_core.c
> @@ -252,7 +252,8 @@ static int get_port_device_capability(struct pci_dev *dev)
>  	}
>  
>  	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
> -	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
> +	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
> +	    (pcie_ports_native || host->native_dpc))
>  		services |= PCIE_PORT_SERVICE_DPC;
>  
>  	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index a3c7338fad86..cf8acdd62089 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -601,6 +601,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
>  	bridge->native_shpc_hotplug = 1;
>  	bridge->native_pme = 1;
>  	bridge->native_ltr = 1;
> +	bridge->native_dpc = 1;
>  }
>  
>  struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 9426b9aaed86..8959ed322e15 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -525,7 +525,8 @@ extern bool osc_pc_lpi_support_confirmed;
>  #define OSC_PCI_EXPRESS_AER_CONTROL		0x00000008
>  #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
>  #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
> -#define OSC_PCI_CONTROL_MASKS			0x0000003f
> +#define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
> +#define OSC_PCI_CONTROL_MASKS			0x000000ff

You added 0x80, but 0x3f | 0x80 == 0xbf, not 0xff, so I expected
OSC_PCI_CONTROL_MASKS would change to 0xbf.  Why the difference?

>  #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
>  #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 9e700d9f9f28..9145136ca728 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -510,7 +510,7 @@ struct pci_host_bridge {
>  	unsigned int	native_pme:1;		/* OS may use PCIe PME */
>  	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
>  	unsigned int	preserve_config:1;	/* Preserve FW resource setup */
> -
> +	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */

Please put this next to the other "native_*" bits and preserve the
blank line.

>  	/* Resource alignment requirements */
>  	resource_size_t (*align_resource)(struct pci_dev *dev,
>  			const struct resource *res,
> -- 
> 2.21.0
> 

Re: [PATCH v6 3/9] PCI/ACPI: Expose EDR support via _OSC to BIOS

[Bjorn Helgaas]

On Fri, Jul 26, 2019 at 02:43:13PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> As per PCI firmware specification r3.2 Downstream Port Containment
> Related Enhancements ECN, sec 4.5.1, table 4-4, if OS supports EDR,
> it should expose its support to BIOS by setting bit 7 of _OSC Support
> Field.
> 
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Len Brown <lenb@kernel.org>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>  drivers/acpi/pci_root.c | 3 +++
>  include/linux/acpi.h    | 1 +
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index 73b08f40b0da..988d09d788b6 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -132,6 +132,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
>  	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
>  	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
>  	{ OSC_PCI_MSI_SUPPORT, "MSI" },
> +	{ OSC_PCI_EDR_SUPPORT, "EDR" },
>  	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
>  };
>  
> @@ -442,6 +443,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
>  		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
>  	if (pci_msi_enabled())
>  		support |= OSC_PCI_MSI_SUPPORT;
> +	if (IS_ENABLED(CONFIG_PCIE_EDR))
> +		support |= OSC_PCI_EDR_SUPPORT;

Do we really support it here?  This is patch [3/9] and it looks like
patch [6/9] might be where EDR support really gets added.  It's good
to split changes into small pieces, but only if each piece is
logically self-contained.

>  	decode_osc_support(root, "OS supports", support);
>  	status = acpi_pci_osc_support(root, support);
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 8959ed322e15..b6b43da85d26 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -515,6 +515,7 @@ extern bool osc_pc_lpi_support_confirmed;
>  #define OSC_PCI_CLOCK_PM_SUPPORT		0x00000004
>  #define OSC_PCI_SEGMENT_GROUPS_SUPPORT		0x00000008
>  #define OSC_PCI_MSI_SUPPORT			0x00000010
> +#define OSC_PCI_EDR_SUPPORT			0x00000080
>  #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
>  #define OSC_PCI_SUPPORT_MASKS			0x0000011f

You defined a new bit above but didn't update OSC_PCI_SUPPORT_MASKS to
include that bit.  This looks broken.

Re: [PATCH v6 1/9] PCI/ERR: Update error status after reset_link()

[Kuppuswamy Sathyanarayanan]

Hi,

On 8/15/19 3:16 PM, Bjorn Helgaas wrote:
> On Fri, Jul 26, 2019 at 02:43:11PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
>> reset_link() to recover from fatal errors. But, if the reset is
>> successful there is no need to continue the rest of the error recovery
>> checks. Also, during fatal error recovery, if the initial value of error
>> status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
>> even after successful recovery (using reset_link()) pcie_do_recovery()
>> will report the recovery result as failure. So update the status of
>> error after reset_link().
>>
>> Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
>> Cc: Ashok Raj <ashok.raj@intel.com>
>> Cc: Keith Busch <keith.busch@intel.com>
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>>   drivers/pci/pcie/err.c | 11 ++++++++---
>>   1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index 773197a12568..aecec124a829 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>>   	else
>>   		pci_walk_bus(bus, report_normal_detected, &status);
>>   
>> -	if (state == pci_channel_io_frozen &&
>> -	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
>> -		goto failed;
>> +	if (state == pci_channel_io_frozen) {
>> +		status = reset_link(dev, service);
>> +		if (status != PCI_ERS_RESULT_RECOVERED)
>> +			goto failed;
>> +		else
>> +			goto done;
> This will be easier to read without the negation, i.e.,
>
>                  if (status == PCI_ERS_RESULT_RECOVERED)
>                          goto done;
>                  else
>                          goto failed;
will change it in next version.

-- 
Sathyanarayanan Kuppuswamy
Linux kernel developer

Re: [PATCH v6 2/9] PCI/ACPI: Add _OSC based negotiation support for DPC

[Kuppuswamy Sathyanarayanan]

On 8/15/19 3:17 PM, Bjorn Helgaas wrote:
> On Fri, Jul 26, 2019 at 02:43:12PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> As per PCI firmware specification r3.2 Downstream Port Containment
>> Related Enhancements ECN, sec 4.5.1, table 4-6, OS can use bit 7 of _OSC
>> Control Field to negotiate control over Downstream Port Containment
>> (DPC) configuration of PCIe port.
>>
>> After _OSC negotiation, firmware will Set this bit to grant OS control
>> over PCIe DPC configuration and Clear it if this feature was requested
>> and denied, or was not requested.
>>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
>> Cc: Len Brown <lenb@kernel.org>
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>>   drivers/acpi/pci_root.c         | 6 ++++++
>>   drivers/pci/pcie/portdrv_core.c | 3 ++-
>>   drivers/pci/probe.c             | 1 +
>>   include/linux/acpi.h            | 3 ++-
>>   include/linux/pci.h             | 2 +-
>>   5 files changed, 12 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>> index 314a187ed572..73b08f40b0da 100644
>> --- a/drivers/acpi/pci_root.c
>> +++ b/drivers/acpi/pci_root.c
>> @@ -142,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
>>   	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
>>   	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
>>   	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
>> +	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
>>   };
>>   
>>   static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
>> @@ -488,6 +489,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
>>   			control |= OSC_PCI_EXPRESS_AER_CONTROL;
>>   	}
>>   
>> +	if (IS_ENABLED(CONFIG_PCIE_DPC))
>> +		control |= OSC_PCI_EXPRESS_DPC_CONTROL;
> Sec 4.5.2.4 says:
>
>    If the OS sets bit 7 of the Control field, it must set bit 7 of the
>    Support field, indicating support for the Error Disconnect Recover
>    event.

I think the correct dependency should be , if OS indicates support for 
EDR then it must
set bit 7 of the Control field to indicate support for DPC. As per DPC 
control bit definition, setting
this bit indicates requesting control of DPC for OS (not EDR).

I will ask the spec author for clarification. But for now I will go with 
spec requirement, I will merge this
patch with "Expose EDR support via _OSC to BIOS" patch and push it to 
the end of the patch set.

>
> I see that you do set bit 7 (OSC_PCI_EDR_SUPPORT) in the Support field
> in a later patch, but I don't think we should have this intermediate
> state where we set OSC_PCI_EXPRESS_DPC_CONTROL in Control but not
> OSC_PCI_EDR_SUPPORT in Support.
>
>>   	requested = control;
>>   	status = acpi_pci_osc_control_set(handle, &control,
>>   					  OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
>> @@ -917,6 +921,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
>>   		host_bridge->native_pme = 0;
>>   	if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
>>   		host_bridge->native_ltr = 0;
>> +	if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
>> +		host_bridge->native_dpc = 0;
>>   
>>   	/*
>>   	 * Evaluate the "PCI Boot Configuration" _DSM Function.  If it
>> diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
>> index 308c3e0c4a34..58c40fe7856f 100644
>> --- a/drivers/pci/pcie/portdrv_core.c
>> +++ b/drivers/pci/pcie/portdrv_core.c
>> @@ -252,7 +252,8 @@ static int get_port_device_capability(struct pci_dev *dev)
>>   	}
>>   
>>   	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
>> -	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
>> +	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
>> +	    (pcie_ports_native || host->native_dpc))
>>   		services |= PCIE_PORT_SERVICE_DPC;
>>   
>>   	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index a3c7338fad86..cf8acdd62089 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -601,6 +601,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
>>   	bridge->native_shpc_hotplug = 1;
>>   	bridge->native_pme = 1;
>>   	bridge->native_ltr = 1;
>> +	bridge->native_dpc = 1;
>>   }
>>   
>>   struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 9426b9aaed86..8959ed322e15 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -525,7 +525,8 @@ extern bool osc_pc_lpi_support_confirmed;
>>   #define OSC_PCI_EXPRESS_AER_CONTROL		0x00000008
>>   #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
>>   #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
>> -#define OSC_PCI_CONTROL_MASKS			0x0000003f
>> +#define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
>> +#define OSC_PCI_CONTROL_MASKS			0x000000ff
> You added 0x80, but 0x3f | 0x80 == 0xbf, not 0xff, so I expected
> OSC_PCI_CONTROL_MASKS would change to 0xbf.  Why the difference?
Good catch. Even though spec has support for bit[6], it should be
masked till OS supports it. I will fix it in next version.
>
>>   #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
>>   #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index 9e700d9f9f28..9145136ca728 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -510,7 +510,7 @@ struct pci_host_bridge {
>>   	unsigned int	native_pme:1;		/* OS may use PCIe PME */
>>   	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
>>   	unsigned int	preserve_config:1;	/* Preserve FW resource setup */
>> -
>> +	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */
> Please put this next to the other "native_*" bits and preserve the
> blank line.
ok.
>
>>   	/* Resource alignment requirements */
>>   	resource_size_t (*align_resource)(struct pci_dev *dev,
>>   			const struct resource *res,
>> -- 
>> 2.21.0
>>
-- 
Sathyanarayanan Kuppuswamy
Linux kernel developer

Re: [PATCH v6 3/9] PCI/ACPI: Expose EDR support via _OSC to BIOS

[Kuppuswamy Sathyanarayanan]

On 8/15/19 3:19 PM, Bjorn Helgaas wrote:
> On Fri, Jul 26, 2019 at 02:43:13PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> As per PCI firmware specification r3.2 Downstream Port Containment
>> Related Enhancements ECN, sec 4.5.1, table 4-4, if OS supports EDR,
>> it should expose its support to BIOS by setting bit 7 of _OSC Support
>> Field.
>>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
>> Cc: Len Brown <lenb@kernel.org>
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>>   drivers/acpi/pci_root.c | 3 +++
>>   include/linux/acpi.h    | 1 +
>>   2 files changed, 4 insertions(+)
>>
>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>> index 73b08f40b0da..988d09d788b6 100644
>> --- a/drivers/acpi/pci_root.c
>> +++ b/drivers/acpi/pci_root.c
>> @@ -132,6 +132,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
>>   	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
>>   	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
>>   	{ OSC_PCI_MSI_SUPPORT, "MSI" },
>> +	{ OSC_PCI_EDR_SUPPORT, "EDR" },
>>   	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
>>   };
>>   
>> @@ -442,6 +443,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
>>   		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
>>   	if (pci_msi_enabled())
>>   		support |= OSC_PCI_MSI_SUPPORT;
>> +	if (IS_ENABLED(CONFIG_PCIE_EDR))
>> +		support |= OSC_PCI_EDR_SUPPORT;
> Do we really support it here?  This is patch [3/9] and it looks like
> patch [6/9] might be where EDR support really gets added.  It's good
> to split changes into small pieces, but only if each piece is
> logically self-contained.
I will move this patch to the end of this series.
>
>>   	decode_osc_support(root, "OS supports", support);
>>   	status = acpi_pci_osc_support(root, support);
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 8959ed322e15..b6b43da85d26 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -515,6 +515,7 @@ extern bool osc_pc_lpi_support_confirmed;
>>   #define OSC_PCI_CLOCK_PM_SUPPORT		0x00000004
>>   #define OSC_PCI_SEGMENT_GROUPS_SUPPORT		0x00000008
>>   #define OSC_PCI_MSI_SUPPORT			0x00000010
>> +#define OSC_PCI_EDR_SUPPORT			0x00000080
>>   #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
>>   #define OSC_PCI_SUPPORT_MASKS			0x0000011f
> You defined a new bit above but didn't update OSC_PCI_SUPPORT_MASKS to
> include that bit.  This looks broken.
>
-- 
Sathyanarayanan Kuppuswamy
Linux kernel developer

Re: [PATCH v6 1/9] PCI/ERR: Update error status after reset_link()

[Joe Perches]

On Thu, 2019-08-15 at 17:16 -0500, Bjorn Helgaas wrote:
> On Fri, Jul 26, 2019 at 02:43:11PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> > From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > 
> > Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
> > reset_link() to recover from fatal errors. But, if the reset is
> > successful there is no need to continue the rest of the error recovery
> > checks. Also, during fatal error recovery, if the initial value of error
> > status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
> > even after successful recovery (using reset_link()) pcie_do_recovery()
> > will report the recovery result as failure. So update the status of
> > error after reset_link().
[]
> > diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
[]
> > @@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
> >  	else
> >  		pci_walk_bus(bus, report_normal_detected, &status);
> >  
> > -	if (state == pci_channel_io_frozen &&
> > -	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
> > -		goto failed;
> > +	if (state == pci_channel_io_frozen) {
> > +		status = reset_link(dev, service);
> > +		if (status != PCI_ERS_RESULT_RECOVERED)
> > +			goto failed;
> > +		else
> > +			goto done;
> 
> This will be easier to read without the negation, i.e.,
> 
>                 if (status == PCI_ERS_RESULT_RECOVERED)
>                         goto done;
>                 else
>                         goto failed;

bikeshed: I think it'd be easier to read without the else

		status = reset_link(dev, service);
		if (status != PCI_ERS_RESULT_RECOVERED)
			goto failed;

		goto done;