From: "Linux kernel regression tracking (#adding)" <regressions@leemhuis.info>
To: Bjorn Helgaas <helgaas@kernel.org>, Koba Ko <koba.ko@canonical.com>
Cc: vsd@suremail.info, "Tom Lendacky" <thomas.lendacky@amd.com>,
"John Allen" <john.allen@amd.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
linux-crypto@vger.kernel.org, linux-pci@vger.kernel.org,
regressions@lists.linux.dev
Subject: Re: [Bug 216888] New: "sysfs: cannot create duplicate filename /dma/dma0chan0" with 68dbe80f ("crypto: ccp - Release dma channels before dmaengine unrgister")
Date: Fri, 6 Jan 2023 09:38:59 +0100 [thread overview]
Message-ID: <7b38ae22-b13d-64af-7c79-a56cdba26754@leemhuis.info> (raw)
In-Reply-To: <20230105174736.GA1154719@bhelgaas>
[TLDR: I'm adding this report to the list of tracked Linux kernel
regressions; all text you find below is based on a few templates
paragraphs you might have encountered already already in similar form.
See link in footer if these mails annoy you.]
On 05.01.23 18:47, Bjorn Helgaas wrote:
> Per the report, this is a regression and reverting 68dbe80f5b51
> ("crypto: ccp - Release dma channels before dmaengine unrgister"),
> which appeared in v6.1, avoids the problem.
>
> The bugzilla is assigned to PCI, and I know PCI does have similar
> sysfs duplicate filename issues, but I don't know whether this
> instance is related to 68dbe80f5b51 or to the PCI core.
>
> On Thu, Jan 05, 2023 at 03:12:26PM +0000, bugzilla-daemon@kernel.org wrote:
>> https://bugzilla.kernel.org/show_bug.cgi?id=216888
>> Summary: "sysfs: cannot create duplicate filename
>> /dma/dma0chan0" with 68dbe80f ("crypto: ccp - Release
>> dma channels before dmaengine unrgister")
>>
>> An issue was found in the CCP driver (drivers/crypto/ccp/) that
>> the patch 68dbe80f ("crypto: ccp - Release dma channels before
>> dmaengine unrgister") causes the following errors/warnings with
>> just unloading and loading the CCP driver. I'm not sure if this
>> can be reproduced without the CCP hardware:
>>
>> # uname -r
>> 6.2.0-0.rc2.18.eln124.x86_64
>>
>> # lspci | grep 'Encryption controller'
>> 02:00.1 Encryption controller: Advanced Micro Devices, Inc. [AMD]
>> Zeppelin Cryptographic Coprocessor NTBCCP ### PCIID: 1022:1468
>> Subsystem: 1022:1468
>> 03:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD]
>> Family 17h (Models 00h-0fh) Platform Security Processor ### PCIID:
>> 1022:1456 Subsystem: 1022:1456
>>
>> # rmmod kvm_amd ccp ; modprobe ccp
>> [ 140.965403] sysfs: cannot create duplicate filename
>> '/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0'
>> [ 140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not
>> tainted 6.2.0-0.rc2.18.eln124.x86_64 #1
>> [ 140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325
>> Gen10, BIOS A41 07/17/2020
>> [ 140.993761] Workqueue: events work_for_cpu_fn
>> [ 140.998151] Call Trace:
>> [ 141.000613] <TASK>
>> [ 141.002726] dump_stack_lvl+0x33/0x46
>> [ 141.006415] sysfs_warn_dup.cold+0x17/0x23
>> [ 141.010542] sysfs_create_dir_ns+0xba/0xd0
>> [ 141.014670] kobject_add_internal+0xba/0x260
>> [ 141.018970] kobject_add+0x81/0xb0
>> [ 141.022395] device_add+0xdc/0x7e0
>> [ 141.025822] ? complete_all+0x20/0x90
>> [ 141.029510] __dma_async_device_channel_register+0xc9/0x130
>> [ 141.035119] dma_async_device_register+0x19e/0x3b0
>> [ 141.039943] ccp_dmaengine_register+0x334/0x3f0 [ccp]
>> [ 141.045042] ccp5_init+0x662/0x6a0 [ccp]
>> [ 141.049000] ? devm_kmalloc+0x40/0xd0
>> [ 141.052688] ccp_dev_init+0xbb/0xf0 [ccp]
>> [ 141.056732] ? __pci_set_master+0x56/0xd0
>> [ 141.060768] sp_init+0x70/0x90 [ccp]
>> [ 141.064377] sp_pci_probe+0x186/0x1b0 [ccp]
>> [ 141.068596] local_pci_probe+0x41/0x80
>> [ 141.072374] work_for_cpu_fn+0x16/0x20
>> [ 141.076145] process_one_work+0x1c8/0x380
>> [ 141.080181] worker_thread+0x1ab/0x380
>> [ 141.083953] ? __pfx_worker_thread+0x10/0x10
>> [ 141.088250] kthread+0xda/0x100
>> [ 141.091413] ? __pfx_kthread+0x10/0x10
>> [ 141.095185] ret_from_fork+0x2c/0x50
>> [ 141.098788] </TASK>
>> [ 141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST,
>> don't try to register things with the same name in the same directory.
>> [ 141.113703] ccp 0000:03:00.2: ccp initialization failed
>> [ 141.118983] ccp 0000:03:00.2: SEV: memory encryption not enabled by BIOS
>> [ 141.125728] ccp 0000:03:00.2: psp enabled
>> [ 141.130020] ccp 0000:02:00.1: could not enable MSI-X (-22), trying MSI
>> [ 141.136939] sysfs: cannot create duplicate filename '/class/dma/dma0chan0'
>> [ 141.143863] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not
>> tainted 6.2.0-0.rc2.18.eln124.x86_64 #1
>> [ 141.153313] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325
>> Gen10, BIOS A41 07/17/2020
>> [ 141.161889] Workqueue: events work_for_cpu_fn
>> [ 141.166274] Call Trace:
>> [ 141.168733] <TASK>
>> [ 141.170845] dump_stack_lvl+0x33/0x46
>> [ 141.174531] sysfs_warn_dup.cold+0x17/0x23
>> [ 141.178652] sysfs_do_create_link_sd+0xcf/0xe0
>> [ 141.183124] device_add+0x28a/0x7e0
>> [ 141.186634] ? complete_all+0x20/0x90
>> [ 141.190318] __dma_async_device_channel_register+0xc9/0x130
>> [ 141.195925] dma_async_device_register+0x19e/0x3b0
>> [ 141.200745] ccp_dmaengine_register+0x334/0x3f0 [ccp]
>> [ 141.205838] ccp5_init+0x662/0x6a0 [ccp]
>> [ 141.209795] ? devm_kmalloc+0x40/0xd0
>> [ 141.213479] ccp_dev_init+0xbb/0xf0 [ccp]
>> [ 141.217524] ? __pci_set_master+0x56/0xd0
>> [ 141.221559] sp_init+0x70/0x90 [ccp]
>> [ 141.225166] sp_pci_probe+0x186/0x1b0 [ccp]
>> [ 141.229385] local_pci_probe+0x41/0x80
>> [ 141.233159] work_for_cpu_fn+0x16/0x20
>> [ 141.236933] process_one_work+0x1c8/0x380
>> [ 141.240966] worker_thread+0x1ab/0x380
>> [ 141.244737] ? __pfx_worker_thread+0x10/0x10
>> [ 141.249032] kthread+0xda/0x100
>> [ 141.252192] ? __pfx_kthread+0x10/0x10
>> [ 141.255964] ret_from_fork+0x2c/0x50
>> [ 141.259563] </TASK>
>> [ 141.261902] ccp 0000:02:00.1: ccp initialization failed
>>
>> This is reproducible with the latest upstream v6.2-rc2 code,
>> "6.2.0-0.rc2.18.eln124.x86_64" is just the v6.2-rc2 code built
>> with Fedora/ELN kernel configs. I'm talking about the commit
>> 68dbe80f because just reverting it makes the above errors/warnings
>> disappear.
Thanks for the report. To be sure the issue doesn't fall through the
cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression
tracking bot:
#regzbot introduced 68dbe80f5b51 ^
https://bugzilla.kernel.org/show_bug.cgi?id=216888
#regzbot title cannot create duplicate filename /dma/dma0chan0
#regzbot ignore-activity
This isn't a regression? This issue or a fix for it are already
discussed somewhere else? It was fixed already? You want to clarify when
the regression started to happen? Or point out I got the title or
something else totally wrong? Then just reply and tell me -- ideally
while also telling regzbot about it, as explained by the page listed in
the footer of this mail.
Reminder for developers: When fixing the issue, add 'Link:' tags
pointing to the report (see page linked in footer for details).
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.
next prev parent reply other threads:[~2023-01-06 8:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-216888-41252@https.bugzilla.kernel.org/>
2023-01-05 17:47 ` [Bug 216888] New: "sysfs: cannot create duplicate filename /dma/dma0chan0" with 68dbe80f ("crypto: ccp - Release dma channels before dmaengine unrgister") Bjorn Helgaas
2023-01-06 8:38 ` Linux kernel regression tracking (#adding) [this message]
2023-01-30 12:54 ` Linux kernel regression tracking (#update)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7b38ae22-b13d-64af-7c79-a56cdba26754@leemhuis.info \
--to=regressions@leemhuis.info \
--cc=helgaas@kernel.org \
--cc=john.allen@amd.com \
--cc=koba.ko@canonical.com \
--cc=kw@linux.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=regressions@lists.linux.dev \
--cc=thomas.lendacky@amd.com \
--cc=vsd@suremail.info \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).