linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: "Rafał Miłecki" <zajec5@gmail.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Nicolas Saenz Julienne" <nsaenzjulienne@suse.de>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	"Rafał Miłecki" <rafal@milecki.pl>
Subject: Re: [PATCH V2 2/2] PCI: brcmstb: support BCM4908 with external PERST# signal controller
Date: Fri, 4 Dec 2020 10:21:25 -0800	[thread overview]
Message-ID: <812ab1ce-15e0-d260-97cf-597388505416@gmail.com> (raw)
In-Reply-To: <20201130083223.32594-3-zajec5@gmail.com>



On 11/30/2020 12:32 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> BCM4908 uses external MISC block for controlling PERST# signal. Use it
> as a reset controller.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> V2: Reorder BCM4908 in the enum pcie_type
>     Use devm_reset_control_get_optional_exclusive()
>     Don't move hw_rev read up in the code
> ---
>  drivers/pci/controller/Kconfig        |  2 +-
>  drivers/pci/controller/pcie-brcmstb.c | 32 +++++++++++++++++++++++++++
>  2 files changed, 33 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 64e2f5e379aa..d44c70bb88f6 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -273,7 +273,7 @@ config VMD
>  
>  config PCIE_BRCMSTB
>  	tristate "Broadcom Brcmstb PCIe host controller"
> -	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
> +	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || COMPILE_TEST
>  	depends on OF
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	default ARCH_BRCMSTB
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 9c3d2982248d..98536cf3af58 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -96,6 +96,7 @@
>  
>  #define PCIE_MISC_REVISION				0x406c
>  #define  BRCM_PCIE_HW_REV_33				0x0303
> +#define  BRCM_PCIE_HW_REV_3_20				0x0320
>  
>  #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
>  #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
> @@ -190,6 +191,7 @@
>  struct brcm_pcie;
>  static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
>  static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
> +static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
>  static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
>  static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
>  
> @@ -206,6 +208,7 @@ enum {
>  
>  enum pcie_type {
>  	GENERIC,
> +	BCM4908,
>  	BCM7278,
>  	BCM2711,
>  };
> @@ -230,6 +233,13 @@ static const struct pcie_cfg_data generic_cfg = {
>  	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
>  };
>  
> +static const struct pcie_cfg_data bcm4908_cfg = {
> +	.offsets	= pcie_offsets,
> +	.type		= BCM4908,
> +	.perst_set	= brcm_pcie_perst_set_4908,
> +	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> +};
> +
>  static const int pcie_offset_bcm7278[] = {
>  	[RGR1_SW_INIT_1] = 0xc010,
>  	[EXT_CFG_INDEX] = 0x9000,
> @@ -282,6 +292,7 @@ struct brcm_pcie {
>  	const int		*reg_offsets;
>  	enum pcie_type		type;
>  	struct reset_control	*rescal;
> +	struct reset_control	*perst_reset;
>  	int			num_memc;
>  	u64			memc_size[PCIE_BRCM_MAX_MEMC];
>  	u32			hw_rev;
> @@ -747,6 +758,17 @@ static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32
>  	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
>  }
>  
> +static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
> +{
> +	if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
> +		return;
> +
> +	if (val)
> +		reset_control_assert(pcie->perst_reset);
> +	else
> +		reset_control_deassert(pcie->perst_reset);

This looks good to me now, just one nit, you probably do not support
suspend/resume on the 4908, likely never will, but you should probably
pulse the PERST# during PCIe resume, too. With that fixed:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

  reply	other threads:[~2020-12-04 18:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-30  8:32 [PATCH V2 0/2] brcmstb: initial work on BCM4908 Rafał Miłecki
2020-11-30  8:32 ` [PATCH V2 1/2] dt-bindings: PCI: brcmstb: add BCM4908 binding Rafał Miłecki
2020-12-08 23:44   ` Rob Herring
2020-11-30  8:32 ` [PATCH V2 2/2] PCI: brcmstb: support BCM4908 with external PERST# signal controller Rafał Miłecki
2020-12-04 18:21   ` Florian Fainelli [this message]
2020-12-10  8:46     ` Rafał Miłecki
2020-12-10 17:27       ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=812ab1ce-15e0-d260-97cf-597388505416@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=p.zabel@pengutronix.de \
    --cc=rafal@milecki.pl \
    --cc=robh+dt@kernel.org \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).