Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]

[Alexey Kardashevskiy <aik@ozlabs.ru>]

On 09/01/2019 18:25, Benjamin Herrenschmidt wrote:
> On Wed, 2019-01-09 at 17:32 +1100, Alexey Kardashevskiy wrote:
>> I have just moved the "Mellanox Technologies MT27700 Family
>> [ConnectX-4]" from garrison to firestone machine and there it does not
>> produce an EEH, with the same kernel and skiboot (both upstream + my
>> debug). Hm. I cannot really blame the card but I cannot see what could
>> cause the difference in skiboot either. I even tried disabling NPU so
>> garrison would look like firestone, still EEH'ing.
> 
> The systems have a different chip though, firestone is P8 and garrison
> is P8', which a slightly different PHB revision. Worth checking if we
> have anything significantly different in our inits and poke at the HW
> guys.

Nope, we do not have anything different for these machines. Asking HW
guys never worked for me :-/

I think the easiest is just doing what we did for PHB4 and ignoring
these D3 requests on garrisons.


> BTW. Are the cards behind a switch in either case ?


No, directly connected to the root on both:

garrison:

0000:00:00.0 PCI bridge: IBM Device 03dc (rev ff)
0000:01:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4] (rev ff)
0000:01:00.1 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4] (rev ff)

firestone (phb #0 is taken by nvidia gpu):

0001:00:00.0 PCI bridge: IBM POWER8 Host Bridge (PHB3)
0001:01:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
0001:01:00.1 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]


-- 
Alexey