linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
@ 2021-06-16  6:27 Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, bpf, coresight, devicetree,
	kunit-dev, kvm, linux-acpi, linux-arm-kernel, linux-gpio,
	linux-i2c, linux-kselftest, linux-pci, linux-pm,
	linux-security-module, netdev, x86

(Maintainers bcc, to avoid too many recipient troubles)

As discussed at:
	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
automarkup.py extension should handle it automatically, on most cases.

There are a couple of exceptions to this rule:

1. when :doc:  tag is used to point to a kernel-doc DOC: markup;
2. when it is used with a named tag, e. g. :doc:`some name <foo>`;

On this series:

Patch 1 manually adjust the references inside driver-api/pm/devices.rst,
as there it uses :file:`foo` to refer to some Documentation/ files;

Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst
into a list, carefully avoiding the 

The remaining patches convert the other occurrences via a replace script.
They were manually edited, in order to honour 80-columns where possible.

This series based on docs-next branch. In order to avoid merge conflicts,
I rebased it internally against yesterday's linux-next, dropping a patch
and a hunk that would have caused conflicts there.

I'll re-send the remaining patch (plus another patch) with conflicting
changes, together with any other doc:`filename` reference that might
still be upstream by 5.14-rc1.

---

v2:
   - dropped media patches (as I merged via my own tree);
   - removed one patch that would conflict at linux-next (adm1177.rst);
   - removed one hunk fron kunit patch that would also conflict at
     linux-next.

Mauro Carvalho Chehab (29):
  docs: devices.rst: better reference documentation docs
  docs: dev-tools: kunit: don't use a table for docs name
  docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
  docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
  docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
  docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
  docs: core-api: avoid using ReST :doc:`foo` markup
  docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo`
    markup
  docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  docs: devicetree: bindings: submitting-patches.rst: avoid using ReST
    :doc:`foo` markup
  docs: doc-guide: avoid using ReST :doc:`foo` markup
  docs: driver-api: avoid using ReST :doc:`foo` markup
  docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: usb: avoid using ReST :doc:`foo` markup
  docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  docs: i2c: avoid using ReST :doc:`foo` markup
  docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
  docs: networking: devlink: avoid using ReST :doc:`foo` markup
  docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo`
    markup
  docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  docs: process: submitting-patches.rst: avoid using ReST :doc:`foo`
    markup
  docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo`
    markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: x86: avoid using ReST :doc:`foo` markup

 .../PCI/endpoint/pci-endpoint-cfs.rst         |  2 +-
 Documentation/PCI/pci.rst                     |  6 +--
 .../special-register-buffer-data-sampling.rst |  3 +-
 Documentation/admin-guide/pm/intel_idle.rst   | 16 +++++---
 Documentation/admin-guide/pm/intel_pstate.rst |  9 +++--
 Documentation/admin-guide/sysctl/abi.rst      |  2 +-
 Documentation/admin-guide/sysctl/kernel.rst   | 37 ++++++++++---------
 Documentation/block/biodoc.rst                |  2 +-
 Documentation/bpf/bpf_lsm.rst                 | 13 ++++---
 .../core-api/bus-virt-phys-mapping.rst        |  2 +-
 Documentation/core-api/dma-api.rst            |  5 ++-
 Documentation/core-api/dma-isa-lpc.rst        |  2 +-
 Documentation/core-api/index.rst              |  4 +-
 Documentation/dev-tools/kunit/api/index.rst   |  8 ++--
 Documentation/dev-tools/kunit/faq.rst         |  2 +-
 Documentation/dev-tools/kunit/index.rst       | 14 +++----
 Documentation/dev-tools/kunit/start.rst       |  4 +-
 Documentation/dev-tools/kunit/tips.rst        |  5 ++-
 Documentation/dev-tools/kunit/usage.rst       |  8 ++--
 Documentation/dev-tools/testing-overview.rst  | 16 ++++----
 .../bindings/submitting-patches.rst           | 11 +++---
 Documentation/doc-guide/contributing.rst      |  8 ++--
 Documentation/driver-api/gpio/using-gpio.rst  |  4 +-
 Documentation/driver-api/ioctl.rst            |  2 +-
 Documentation/driver-api/pm/devices.rst       |  8 ++--
 .../surface_aggregator/clients/index.rst      |  3 +-
 .../surface_aggregator/internal.rst           | 15 ++++----
 .../surface_aggregator/overview.rst           |  6 ++-
 Documentation/driver-api/usb/dma.rst          |  6 +--
 .../acpi/dsd/data-node-references.rst         |  3 +-
 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../firmware-guide/acpi/enumeration.rst       |  7 ++--
 Documentation/i2c/instantiating-devices.rst   |  2 +-
 Documentation/i2c/old-module-parameters.rst   |  3 +-
 Documentation/i2c/smbus-protocol.rst          |  4 +-
 Documentation/kernel-hacking/hacking.rst      |  4 +-
 .../networking/devlink/devlink-region.rst     |  2 +-
 .../networking/devlink/devlink-trap.rst       |  4 +-
 Documentation/process/submitting-patches.rst  | 32 ++++++++--------
 Documentation/security/landlock.rst           |  3 +-
 Documentation/trace/coresight/coresight.rst   |  8 ++--
 Documentation/trace/ftrace.rst                |  2 +-
 Documentation/userspace-api/landlock.rst      | 11 +++---
 Documentation/virt/kvm/s390-pv-boot.rst       |  2 +-
 Documentation/x86/boot.rst                    |  4 +-
 Documentation/x86/mtrr.rst                    |  2 +-
 46 files changed, 171 insertions(+), 147 deletions(-)

-- 
2.31.1



^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
  2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet
  2 siblings, 0 replies; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Bjorn Helgaas, Kishon Vijay Abraham I,
	Lorenzo Pieralisi, linux-kernel, linux-pci

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/PCI/endpoint/pci-endpoint-cfs.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
index 696f8eeb4738..db609b97ad58 100644
--- a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
@@ -125,4 +125,4 @@ all the EPF devices are created and linked with the EPC device.
 						| interrupt_pin
 						| function
 
-[1] :doc:`pci-endpoint`
+[1] Documentation/PCI/endpoint/pci-endpoint.rst
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v2 22/29] docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
@ 2021-06-16  6:27 ` Mauro Carvalho Chehab
  2021-06-16 14:17   ` Bjorn Helgaas
  2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet
  2 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-16  6:27 UTC (permalink / raw)
  To: Jonathan Corbet, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Bjorn Helgaas, linux-kernel, linux-pci

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/PCI/pci.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index 814b40f8360b..fa651e25d98c 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -265,7 +265,7 @@ Set the DMA mask size
 ---------------------
 .. note::
    If anything below doesn't make sense, please refer to
-   :doc:`/core-api/dma-api`. This section is just a reminder that
+   Documentation/core-api/dma-api.rst. This section is just a reminder that
    drivers need to indicate DMA capabilities of the device and is not
    an authoritative source for DMA interfaces.
 
@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
 Setup shared control data
 -------------------------
 Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
-memory.  See :doc:`/core-api/dma-api` for a full description of
+memory.  See Documentation/core-api/dma-api.rst for a full description of
 the DMA APIs. This section is just a reminder that it needs to be done
 before enabling DMA on the device.
 
@@ -421,7 +421,7 @@ owners if there is one.
 
 Then clean up "consistent" buffers which contain the control data.
 
-See :doc:`/core-api/dma-api` for details on unmapping interfaces.
+See Documentation/core-api/dma-api.rst for details on unmapping interfaces.
 
 
 Unregister from other subsystems
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 22/29] docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
@ 2021-06-16 14:17   ` Bjorn Helgaas
  0 siblings, 0 replies; 5+ messages in thread
From: Bjorn Helgaas @ 2021-06-16 14:17 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, Linux Doc Mailing List, Bjorn Helgaas,
	linux-kernel, linux-pci

On Wed, Jun 16, 2021 at 08:27:37AM +0200, Mauro Carvalho Chehab wrote:
> The :doc:`foo` tag is auto-generated via automarkup.py.
> So, use the filename at the sources, instead of :doc:`foo`.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

I do still think it would be nice to have a hint in the commit log
about *why* we're doing this.

> ---
>  Documentation/PCI/pci.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
> index 814b40f8360b..fa651e25d98c 100644
> --- a/Documentation/PCI/pci.rst
> +++ b/Documentation/PCI/pci.rst
> @@ -265,7 +265,7 @@ Set the DMA mask size
>  ---------------------
>  .. note::
>     If anything below doesn't make sense, please refer to
> -   :doc:`/core-api/dma-api`. This section is just a reminder that
> +   Documentation/core-api/dma-api.rst. This section is just a reminder that
>     drivers need to indicate DMA capabilities of the device and is not
>     an authoritative source for DMA interfaces.
>  
> @@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
>  Setup shared control data
>  -------------------------
>  Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
> -memory.  See :doc:`/core-api/dma-api` for a full description of
> +memory.  See Documentation/core-api/dma-api.rst for a full description of
>  the DMA APIs. This section is just a reminder that it needs to be done
>  before enabling DMA on the device.
>  
> @@ -421,7 +421,7 @@ owners if there is one.
>  
>  Then clean up "consistent" buffers which contain the control data.
>  
> -See :doc:`/core-api/dma-api` for details on unmapping interfaces.
> +See Documentation/core-api/dma-api.rst for details on unmapping interfaces.
>  
>  
>  Unregister from other subsystems
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
  2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
  2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
@ 2021-06-17 19:34 ` Jonathan Corbet
  2 siblings, 0 replies; 5+ messages in thread
From: Jonathan Corbet @ 2021-06-17 19:34 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, bpf, coresight, devicetree,
	kunit-dev, kvm, linux-acpi, linux-arm-kernel, linux-gpio,
	linux-i2c, linux-kselftest, linux-pci, linux-pm,
	linux-security-module, netdev, x86

Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:

> (Maintainers bcc, to avoid too many recipient troubles)
>
> As discussed at:
> 	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
>
> It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
> automarkup.py extension should handle it automatically, on most cases.

I've applied the set, thanks.

jon

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-06-17 19:34 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-16  6:27 [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 21/29] docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup Mauro Carvalho Chehab
2021-06-16  6:27 ` [PATCH v2 22/29] docs: PCI: pci.rst: " Mauro Carvalho Chehab
2021-06-16 14:17   ` Bjorn Helgaas
2021-06-17 19:34 ` [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag Jonathan Corbet

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).