linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Frederick Lawler <fred@fredlawl.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: [PATCH RFC v3 2/3] PCI/ASPM: allow to re-enable Clock PM
Date: Sun, 12 May 2019 15:54:08 +0200	[thread overview]
Message-ID: <9b702eb1-6997-c5e9-2321-339246378609@gmail.com> (raw)
In-Reply-To: <bde6db67-b432-f23c-5a44-d2cbb794ad40@gmail.com>

So far Clock PM can't be re-enabled once it has been disabled with a
call to pci_disable_link_state(). Reason is that clkpm_capable is
reset. Change this by adding a clkpm_disable field similar to
aspm_disable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- no change
v3:
- no change
---
 drivers/pci/pcie/aspm.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 511f3e018..7847be38e 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -65,6 +65,7 @@ struct pcie_link_state {
 	u32 clkpm_capable:1;		/* Clock PM capable? */
 	u32 clkpm_enabled:1;		/* Current Clock PM state */
 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
+	u32 clkpm_disable:1;		/* Clock PM disabled */
 
 	/* Exit latencies */
 	struct aspm_latency latency_up;	/* Upstream direction exit latency */
@@ -162,8 +163,11 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
 
 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
 {
-	/* Don't enable Clock PM if the link is not Clock PM capable */
-	if (!link->clkpm_capable)
+	/*
+	 * Don't enable Clock PM if the link is not Clock PM capable
+	 * or Clock PM is disabled
+	 */
+	if (!link->clkpm_capable || link->clkpm_disable)
 		enable = 0;
 	/* Need nothing if the specified equals to current state */
 	if (link->clkpm_enabled == enable)
@@ -193,7 +197,8 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
 	}
 	link->clkpm_enabled = enabled;
 	link->clkpm_default = enabled;
-	link->clkpm_capable = (blacklist) ? 0 : capable;
+	link->clkpm_capable = capable;
+	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
 static bool pcie_retrain_link(struct pcie_link_state *link)
@@ -1105,10 +1110,9 @@ static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
 		link->aspm_disable |= ASPM_STATE_L1_2_MASK;
 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
 
-	if (state & PCIE_LINK_STATE_CLKPM) {
-		link->clkpm_capable = 0;
-		pcie_set_clkpm(link, 0);
-	}
+	if (state & PCIE_LINK_STATE_CLKPM)
+		link->clkpm_disable = 1;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
 	mutex_unlock(&aspm_lock);
 	if (sem)
 		up_read(&pci_bus_sem);
-- 
2.21.0



  parent reply	other threads:[~2019-05-12 13:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-12 13:52 [PATCH RFC v3 0/3] PCI/ASPM: add sysfs attribute for controlling ASPM Heiner Kallweit
2019-05-12 13:53 ` [PATCH RFC v3 1/3] PCI/ASPM: add L1 sub-state support to pci_disable_link_state Heiner Kallweit
2019-05-12 13:54 ` Heiner Kallweit [this message]
2019-05-12 13:54 ` [PATCH RFC v3 3/3] PCI/ASPM: add sysfs attribute for controlling ASPM Heiner Kallweit
2019-05-17  0:12   ` Frederick Lawler
2019-05-20 19:16     ` Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9b702eb1-6997-c5e9-2321-339246378609@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=fred@fredlawl.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).