Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: RE: [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs
Date: Tue, 12 Mar 2019 04:40:56 +0000
Message-ID: <AM6PR04MB57816A8E3D431B97E65ABB2A84490@AM6PR04MB5781.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20190311140140.GA161843@google.com>

Hi Bjorn,

Thanks a lot for your comments!

> -----Original Message-----
> From: Bjorn Helgaas [mailto:helgaas@kernel.org]
> Sent: 2019年3月11日 22:02
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> robh+dt@kernel.org; mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>;
> lorenzo.pieralisi@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: Re: [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP
> Layerscape SoCs
> 
> On Mon, Mar 11, 2019 at 09:33:16AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > This PCIe controller is based on the Mobiveil GPEX IP, which is
> > compatible with the PCI Express™ Base Specification, Revision 4.0.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> > ---
> > V4:
> >  - no change
> >
> >  drivers/pci/controller/mobiveil/Kconfig       |  10 +
> >  drivers/pci/controller/mobiveil/Makefile      |   1 +
> >  .../controller/mobiveil/pci-layerscape-gen4.c | 254 ++++++++++++++++++
> >  .../pci/controller/mobiveil/pcie-mobiveil.h   |  16 +-
> >  4 files changed, 279 insertions(+), 2 deletions(-)  create mode
> > 100644 drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> >
> > diff --git a/drivers/pci/controller/mobiveil/Kconfig
> > b/drivers/pci/controller/mobiveil/Kconfig
> > index 64343c07bfed..3ddb7d6163a9 100644
> > --- a/drivers/pci/controller/mobiveil/Kconfig
> > +++ b/drivers/pci/controller/mobiveil/Kconfig
> > @@ -21,4 +21,14 @@ config PCIE_MOBIVEIL_PLAT
> >  	  Soft IP. It has up to 8 outbound and inbound windows
> >  	  for address translation and it is a PCIe Gen4 IP.
> >
> > +config PCI_LAYERSCAPE_GEN4
> > +	bool "Freescale Layerscpe PCIe Gen4 controller"
> 
> "Layerscape"

Will fix in v5.

> 
> > +	depends on PCI
> > +	depends on OF && (ARM64 || ARCH_LAYERSCAPE)
> > +	depends on PCI_MSI_IRQ_DOMAIN
> > +	select PCIE_MOBIVEIL_HOST
> > +	help
> > +	  Say Y here if you want PCIe Gen4 controller support on
> > +	  Layerscape SoCs. The PCIe controller can work in RC or
> > +	  EP mode according to RCW[HOST_AGT_PEX] setting.
> >  endmenu
> > diff --git a/drivers/pci/controller/mobiveil/Makefile
> > b/drivers/pci/controller/mobiveil/Makefile
> > index 9fb6d1c6504d..ff66774ccac4 100644
> > --- a/drivers/pci/controller/mobiveil/Makefile
> > +++ b/drivers/pci/controller/mobiveil/Makefile
> > @@ -2,3 +2,4 @@
> >  obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
> >  obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o
> >  obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE_GEN4) += pci-layerscape-gen4.o
> > diff --git a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > new file mode 100644
> > index 000000000000..174cbcac4059
> > --- /dev/null
> > +++ b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > @@ -0,0 +1,254 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe host controller driver for NXP Layerscape SoCs
> 
> It would be nice to make "NXP Layerscape SoCs" a little more specific so we
> can tell how it's different from the existing pci-layerscape.c that says
> "Freescale Layerscape SoCs".  I assume this driver only works with gen4
> parts.

Yes, it is only for NXP SoCs with Mobiveil PCIe Gen4 controller, and will add specific in v5.

> 
> > + * Copyright 2018 NXP
> 
> s/2018/2019/
> 

Will fix in v5.

> > + *
> > + * Author: Zhiqiang Hou <Zhiqiang.Hou@nxp.com> */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/init.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_address.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/resource.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "pcie-mobiveil.h"
> > +
> > +/* LUT and PF control registers */
> > +#define PCIE_LUT_OFF			(0x80000)
> > +#define PCIE_PF_OFF			(0xc0000)
> > +#define PCIE_PF_INT_STAT		(0x18)
> > +#define PF_INT_STAT_PABRST		(31)
> 
> You mix constants that are
> 
>   - the bit position (like this), and
>   - the actual bit mask, like PAB_INTP_RESET
> 
> Pick one and use a single style.  My personal preference is a plain hex bit
> mask, e.g.,
> 
>   #define PF_INT_STAT_PABRST    0x80000000
>   #define PAB_INTP_RESET        0x00000002
> 
> But some people like BIT() or the style you used for PAB_INTP_RESET:
> 
>   #define PAB_INTP_RESET        BIT(1)
>   #define PAB_INTP_RESET        (0x1 << 1)
> 
> I definitely don't like the simple bit position like this:
> 
>   #define PF_INT_STAT_PABRST    31
> 
> because that means you have to repeat things like
> "1 << PF_INT_STAT_PABRST" everywhere you use it.
> 

Will unify them in v5.

> > +#define PCIE_PF_DBG			(0x7fc)
> > +#define PF_DBG_LTSSM_MASK		(0x3f)
> > +#define PF_DBG_WE			(31)
> > +#define PF_DBG_PABR			(27)
> 
> Parens are not needed around single constants like these.

Yes, thanks for your advice.

> 
> > +#define LS_PCIE_G4_LTSSM_L0		0x2d /* L0 state */
> > +
> > +#define to_ls_pcie_g4(x)		platform_get_drvdata((x)->pdev)
> > +
> > +struct ls_pcie_g4 {
> > +	struct mobiveil_pcie *pci;
> > +	struct delayed_work dwork;
> > +	int irq;
> > +};
> > +
> > +static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32
> > +off) {
> > +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> > +}
> > +
> > +static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie,
> > +					 u32 off, u32 val)
> > +{
> > +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off);
> > +}
> > +
> > +static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32
> > +off) {
> > +	return ioread32(pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off);
> > +}
> > +
> > +static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie,
> > +					u32 off, u32 val)
> > +{
> > +	iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off); }
> > +
> > +static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4 *pcie) {
> > +	struct mobiveil_pcie *mv_pci = pcie->pci;
> > +	u32 header_type;
> > +
> > +	header_type = csr_readb(mv_pci, PCI_HEADER_TYPE);
> > +	header_type &= 0x7f;
> > +
> > +	return header_type == PCI_HEADER_TYPE_BRIDGE; }
> > +
> > +static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci) {
> > +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
> > +	u32 state;
> > +
> > +	state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> > +	state =	state & PF_DBG_LTSSM_MASK;
> > +
> > +	if (state == LS_PCIE_G4_LTSSM_L0)
> > +		return 1;
> > +
> > +	return 0;
> > +}
> > +
> > +static void ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie) {
> > +	struct mobiveil_pcie *mv_pci = pcie->pci;
> > +	u32 val, act_stat;
> > +	int to = 100;
> > +
> > +	/* Poll for pab_csb_reset to set and PAB activity to clear */
> > +	do {
> > +		usleep_range(10, 15);
> > +		val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT);
> > +		act_stat = csr_readl(mv_pci, PAB_ACTIVITY_STAT);
> > +	} while (((val & 1 << PF_INT_STAT_PABRST) == 0 || act_stat) && to--);
> > +	if (to < 0) {
> > +		dev_err(&mv_pci->pdev->dev, "poll PABRST&PABACT timeout\n");
> > +		return;
> > +	}
> > +
> > +	/* clear PEX_RESET bit in PEX_PF0_DBG register */
> > +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> > +	val |= 1 << PF_DBG_WE;
> > +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> > +
> > +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> > +	val |= 1 << PF_DBG_PABR;
> > +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> > +
> > +	val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG);
> > +	val &= ~(1 << PF_DBG_WE);
> > +	ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val);
> > +
> > +	mobiveil_host_init(mv_pci, true);
> > +
> > +	to = 100;
> > +	while (!ls_pcie_g4_link_up(mv_pci) && to--)
> > +		usleep_range(200, 250);
> > +	if (to < 0)
> > +		dev_err(&mv_pci->pdev->dev, "PCIe link trainning timeout\n");
> 
> s/trainning/training/
> 

My typo, will fix in v5.

> > +}
> > +
> > +static irqreturn_t ls_pcie_g4_handler(int irq, void *dev_id)
> 
> Function name should include "irq_handler" or "isr".  Run
> 
>   git grep request_irq drivers/pci/controller/
> 
> and follow the existing conventions.
>

Yes, will fix in v5.
 
> > +{
> > +	struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id;
> > +	struct mobiveil_pcie *mv_pci = pcie->pci;
> > +	u32 val;
> > +
> > +	val = csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT);
> > +	if (!val)
> > +		return IRQ_NONE;
> > +
> > +	if (val & PAB_INTP_RESET)
> > +		schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1));
> > +
> > +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci) {
> > +	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
> > +	u32 val;
> > +	int ret;
> > +
> > +	pcie->irq = platform_get_irq_byname(mv_pci->pdev, "intr");
> > +	if (pcie->irq < 0) {
> > +		dev_err(&mv_pci->pdev->dev, "Can't get 'intr' irq.\n");
> 
> When you use &mv_pci->pdev->dev more than once, as you do here, please
> add
> 
>   struct device *dev = &mv_pci->pdev->dev;
> 
> and use "dev" instead of repeating the whole "&mv_pci->pdev->dev"
> expression.
> 
> s/irq./IRQ/ (Capitalize IRQ and omit period)
> 

Will fix in v5.

> > +		return pcie->irq;
> > +	}
> > +	ret = devm_request_irq(&mv_pci->pdev->dev, pcie->irq,
> > +			       ls_pcie_g4_handler, IRQF_SHARED,
> > +			       mv_pci->pdev->name, pcie);
> > +	if (ret) {
> > +		dev_err(&mv_pci->pdev->dev, "Can't register PCIe IRQ.\n");
> 
> Omit period from message and maybe include the IRQ number.
>

Will add in v5.
 
> All your messages should start with lower-case or all should start with
> upper-case (the two in this function are capitalized, but the others are not).
>

Will unify them in v5.
 
> > +		return  ret;
> > +	}
> > +
> > +	/* Enable interrupts */
> > +	val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
> > +	      PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
> > +	csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);
> > +
> > +	return 0;
> > +}
> > +
> > +static void ls_pcie_g4_reset(struct work_struct *work) {
> > +	struct delayed_work *dwork = container_of(work, struct delayed_work,
> > +						  work);
> > +	struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork);
> > +	struct mobiveil_pcie *mv_pci = pcie->pci;
> > +	u16 ctrl;
> > +
> > +	ctrl = csr_readw(mv_pci, PCI_BRIDGE_CONTROL);
> > +	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> > +	csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL);
> > +	ls_pcie_g4_reinit_hw(pcie);
> > +}
> > +
> > +static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = {
> > +	.interrupt_init = ls_pcie_g4_interrupt_init, };
> > +
> > +static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
> > +	.link_up = ls_pcie_g4_link_up,
> > +};
> > +
> > +static int __init ls_pcie_g4_probe(struct platform_device *pdev) {
> > +	struct device *dev = &pdev->dev;
> > +	struct mobiveil_pcie *mv_pci;
> > +	struct ls_pcie_g4 *pcie;
> > +	struct device_node *np = dev->of_node;
> > +	int ret;
> > +
> > +	if (!of_parse_phandle(np, "msi-parent", 0)) {
> > +		dev_err(dev, "failed to find msi-parent\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL);
> > +	if (!mv_pci)
> > +		return -ENOMEM;
> > +
> > +	mv_pci->pdev = pdev;
> > +	mv_pci->ops = &ls_pcie_g4_pab_ops;
> > +	mv_pci->rp.ops = &ls_pcie_g4_rp_ops;
> > +	pcie->pci = mv_pci;
> > +
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset);
> > +
> > +	ret = mobiveil_pcie_host_probe(mv_pci);
> > +	if (ret) {
> > +		dev_err(dev, "fail to probe!\n");
> > +		return  ret;
> > +	}
> > +
> > +	if (!ls_pcie_g4_is_bridge(pcie))
> > +		return -ENODEV;
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id ls_pcie_g4_of_match[] = {
> > +	{ .compatible = "fsl,lx2160a-pcie", },
> > +	{ },
> > +};
> > +
> > +static struct platform_driver ls_pcie_g4_driver = {
> > +	.driver = {
> > +		.name = "layerscape-pcie-gen4",
> > +		.of_match_table = ls_pcie_g4_of_match,
> > +		.suppress_bind_attrs = true,
> > +	},
> > +};
> > +
> > +builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe);
> > diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > index 0f5303962e88..0ccd6cee5f8f 100644
> > --- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > +++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > @@ -41,6 +41,8 @@
> >  #define  PAGE_LO_MASK			0x3ff
> >  #define  PAGE_SEL_OFFSET_SHIFT		10
> >
> > +#define PAB_ACTIVITY_STAT		0x81c
> > +
> >  #define PAB_AXI_PIO_CTRL		0x0840
> >  #define  APIO_EN_MASK			0xf
> >
> > @@ -49,8 +51,18 @@
> >
> >  #define PAB_INTP_AMBA_MISC_ENB		0x0b0c
> >  #define PAB_INTP_AMBA_MISC_STAT		0x0b1c
> > -#define  PAB_INTP_INTX_MASK		0x01e0
> > -#define  PAB_INTP_MSI_MASK		0x8
> > +#define  PAB_INTP_RESET			(0x1 << 1)
> > +#define  PAB_INTP_MSI			(0x1 << 3)
> > +#define  PAB_INTP_INTA			(0x1 << 5)
> > +#define  PAB_INTP_INTB			(0x1 << 6)
> > +#define  PAB_INTP_INTC			(0x1 << 7)
> > +#define  PAB_INTP_INTD			(0x1 << 8)
> > +#define  PAB_INTP_PCIE_UE		(0x1 << 9)
> > +#define  PAB_INTP_IE_PMREDI		(0x1 << 29)
> > +#define  PAB_INTP_IE_EC			(0x1 << 30)
> > +#define  PAB_INTP_MSI_MASK		PAB_INTP_MSI
> > +#define  PAB_INTP_INTX_MASK		(PAB_INTP_INTA |
> PAB_INTP_INTB |\
> > +					PAB_INTP_INTC | PAB_INTP_INTD)
> >
> >  #define PAB_AXI_AMAP_CTRL(win)		PAB_REG_ADDR(0x0ba0,
> win)
> >  #define  WIN_ENABLE_SHIFT		0
> > --
> > 2.17.1
> >

Thanks,
Zhiqiang

  reply index

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11  9:29 [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 " Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 01/28] PCI: mobiveil: uniform the register accessors Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 02/28] PCI: mobiveil: format the code without function change Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 03/28] PCI: mobiveil: correct the returned error number Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 04/28] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 05/28] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 06/28] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2019-03-11  9:30 ` [PATCHv4 07/28] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 08/28] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 09/28] PCI: mobiveil: correct inbound/outbound window setup routines Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 10/28] PCI: mobiveil: fix the INTx process error Z.q. Hou
2019-03-11 14:08   ` Bjorn Helgaas
2019-03-12  4:42     ` Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 11/28] PCI: mobiveil: only fix up the Class Code field Z.q. Hou
2019-03-11 14:14   ` Bjorn Helgaas
2019-03-12  9:17     ` Z.q. Hou
2019-03-13 10:59       ` Subrahmanya Lingappa
2019-03-11  9:31 ` [PATCHv4 12/28] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 13/28] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 14/28] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2019-03-11  9:31 ` [PATCHv4 15/28] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 16/28] PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-03-26 17:34   ` Lorenzo Pieralisi
2019-03-27  2:04     ` Z.q. Hou
2019-03-27 17:39       ` Lorenzo Pieralisi
2019-03-28  2:09         ` Z.q. Hou
2019-03-28 16:09           ` Lorenzo Pieralisi
2019-03-29  6:07             ` Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 17/28] PCI: mobiveil: fix the checking of valid device Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 18/28] PCI: mobiveil: add link up condition check Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 19/28] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 20/28] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 21/28] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2019-03-11  9:32 ` [PATCHv4 22/28] PCI: mobiveil: make mobiveil_host_init can be used to re-init host Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 23/28] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2019-03-11 22:11   ` Rob Herring
2019-03-12  3:17     ` Z.q. Hou
2019-03-12  9:42   ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 24/28] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2019-03-11 14:01   ` Bjorn Helgaas
2019-03-12  4:40     ` Z.q. Hou [this message]
2019-03-11  9:33 ` [PATCHv4 25/28] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577 Z.q. Hou
2019-03-13 14:51   ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 26/28] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451 Z.q. Hou
2019-03-11 17:34   ` Bjorn Helgaas
2019-03-12  9:34     ` Z.q. Hou
2019-03-12 13:34       ` Bjorn Helgaas
2019-03-13 14:49         ` Z.q. Hou
2019-03-13 14:51   ` Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 27/28] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2019-03-11  9:33 ` [PATCHv4 28/28] arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4 Z.q. Hou
2019-03-11 13:33 ` [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Bjorn Helgaas
2019-03-12  4:18   ` Z.q. Hou
2019-03-26 17:37 ` Lorenzo Pieralisi
2019-03-27  2:11   ` Z.q. Hou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM6PR04MB57816A8E3D431B97E65ABB2A84490@AM6PR04MB5781.eurprd04.prod.outlook.com \
    --to=zhiqiang.hou@nxp.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=helgaas@kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=xiaowei.bao@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git