From: Bjorn Helgaas <bhelgaas@google.com>
To: Jiang Liu <liuj97@gmail.com>
Cc: Don Dutile <ddutile@redhat.com>, Yinghai Lu <yinghai@kernel.org>,
Greg KH <gregkh@linuxfoundation.org>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
"Rafael J . Wysocki" <rjw@sisk.pl>,
Yijing Wang <wangyijing@huawei.com>,
Xinwei Hu <huxinwei@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [RFC PATCH v1 15/22] PCI/eeepc: use PCI bus lock to avoid race conditions
Date: Tue, 11 Sep 2012 17:18:03 -0600 [thread overview]
Message-ID: <CAErSpo5ZQmzusUMuB7TobCH-Bzw=r78h8SGQ88-WqaH7nRSXkQ@mail.gmail.com> (raw)
In-Reply-To: <1344355862-2726-16-git-send-email-jiang.liu@huawei.com>
On Tue, Aug 7, 2012 at 10:10 AM, Jiang Liu <liuj97@gmail.com> wrote:
> This patch uses PCI bus lock mechanism to avoid race conditions when doing
> PCI device hotplug through eeepc driver.
> It also fixes a PCI device reference
> count leakage issue because acpi_get_pci_dev() holds a reference to the
> device returned.
Can you split this refcount fix out as a separate patch? That looks
pretty straightforward, unlike the bus lock stuff.
> Signed-off-by: Jiang Liu <liuj97@gmail.com>
> ---
> drivers/platform/x86/eeepc-laptop.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
> index dab91b4..25c4176 100644
> --- a/drivers/platform/x86/eeepc-laptop.c
> +++ b/drivers/platform/x86/eeepc-laptop.c
> @@ -606,16 +606,16 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
> goto out_unlock;
> }
>
> - bus = port->subordinate;
> + bus = pci_lock_subordinate(port, PCI_BUS_STATE_WORKING);
>
> if (!bus) {
> pr_warn("Unable to find PCI bus 1?\n");
> - goto out_unlock;
> + goto out_put_dev;
> }
>
> if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
> pr_err("Unable to read PCI config space?\n");
> - goto out_unlock;
> + goto out_unlock_bus;
> }
>
> absent = (l == 0xffffffff);
> @@ -627,7 +627,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
> absent ? "absent" : "present");
> pr_warn("skipped wireless hotplug as probably "
> "inappropriate for this model\n");
> - goto out_unlock;
> + goto out_unlock_bus;
> }
>
> if (!blocked) {
> @@ -635,7 +635,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
> if (dev) {
> /* Device already present */
> pci_dev_put(dev);
> - goto out_unlock;
> + goto out_unlock_bus;
> }
> dev = pci_scan_single_device(bus, 0);
> if (dev) {
> @@ -650,6 +650,11 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
> pci_dev_put(dev);
> }
> }
> +
> +out_unlock_bus:
> + pci_bus_unlock(bus);
> +out_put_dev:
> + pci_dev_put(port);
> }
>
> out_unlock:
> @@ -757,7 +762,7 @@ static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
> static int eeepc_setup_pci_hotplug(struct eeepc_laptop *eeepc)
> {
> int ret = -ENOMEM;
> - struct pci_bus *bus = pci_find_bus(0, 1);
> + struct pci_bus *bus = pci_get_bus(0, 1);
>
> if (!bus) {
> pr_err("Unable to find wifi PCI bus\n");
> @@ -785,6 +790,8 @@ static int eeepc_setup_pci_hotplug(struct eeepc_laptop *eeepc)
> goto error_register;
> }
>
> + pci_bus_put(bus);
> +
> return 0;
>
> error_register:
> @@ -793,6 +800,7 @@ error_info:
> kfree(eeepc->hotplug_slot);
> eeepc->hotplug_slot = NULL;
> error_slot:
> + pci_bus_put(bus);
> return ret;
> }
>
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2012-09-11 23:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 16:10 [RFC PATCH v1 00/22] introduce PCI bus lock to serialize PCI hotplug operations Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 01/22] PCI: use pci_get_domain_bus_and_slot() to avoid race conditions Jiang Liu
2012-09-11 22:00 ` Bjorn Helgaas
2012-09-12 8:37 ` Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 02/22] PCI: trivial cleanups for drivers/pci/remove.c Jiang Liu
2012-09-11 22:03 ` Bjorn Helgaas
2012-09-12 8:50 ` Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 03/22] PCI: change PCI device management code to better follow device model Jiang Liu
2012-09-11 22:03 ` Bjorn Helgaas
2012-08-07 16:10 ` [RFC PATCH v1 04/22] PCI: split PCI bus device registration into two stages Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 05/22] PCI: introduce pci_bus_{get|put}() to manage PCI bus reference count Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 06/22] PCI: use a global lock to serialize PCI root bridge hotplug operations Jiang Liu
2012-09-11 22:57 ` Bjorn Helgaas
2012-09-12 15:42 ` Jiang Liu
2012-09-12 16:51 ` Bjorn Helgaas
2012-09-13 16:00 ` [PATCH 1/2] PCI: introduce root bridge hotplug safe interfaces to walk root buses Jiang Liu
2012-09-13 17:40 ` Bjorn Helgaas
2012-09-17 15:55 ` Jiang Liu
2012-09-17 16:24 ` Bjorn Helgaas
2012-09-18 21:39 ` Bjorn Helgaas
2012-09-21 16:07 ` [PATCH v4] PCI: introduce two interfaces to walk PCI buses Jiang Liu
2012-09-26 20:14 ` Bjorn Helgaas
2012-09-13 16:00 ` [PATCH 2/2] PCI: remove host bridge hotplug unsafe interface pci_get_next_bus() Jiang Liu
2012-09-17 15:51 ` [RFC PATCH v1 06/22] PCI: use a global lock to serialize PCI root bridge hotplug operations Jiang Liu
2012-09-20 18:49 ` Paul E. McKenney
2012-08-07 16:10 ` [RFC PATCH v1 07/22] PCI: introduce PCI bus lock to serialize PCI " Jiang Liu
2012-09-11 23:24 ` Bjorn Helgaas
2012-08-07 16:10 ` [RFC PATCH v1 08/22] PCI: introduce hotplug safe search interfaces for PCI bus/device Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 09/22] PCI: enhance PCI probe logic to support PCI bus lock mechanism Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 10/22] PCI: enhance PCI bus specific " Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 11/22] PCI: enhance PCI resource assignment " Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 12/22] PCI: enhance PCI remove " Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 13/22] PCI: make each PCI device hold a reference to its parent PCI bus Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 14/22] PCI/sysfs: use PCI bus lock to avoid race conditions Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 15/22] PCI/eeepc: " Jiang Liu
2012-09-11 23:18 ` Bjorn Helgaas [this message]
2012-09-12 14:24 ` [PATCH] eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug() Jiang Liu
2012-09-12 19:59 ` Bjorn Helgaas
2012-08-07 16:10 ` [RFC PATCH v1 16/22] PCI/asus-wmi: use PCI bus lock to avoid race conditions Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 17/22] PCI/pciehp: " Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 18/22] PCI/acpiphp: " Jiang Liu
2012-08-07 16:10 ` [RFC PATCH v1 19/22] PCI/x86: enable PCI bus lock mechanism for x86 platforms Jiang Liu
2012-09-11 23:22 ` Bjorn Helgaas
2012-09-12 9:56 ` Jiang Liu
2012-08-07 16:11 ` [RFC PATCH v1 20/22] PCI/IA64: enable PCI bus lock mechanism for IA64 platforms Jiang Liu
2012-08-07 16:11 ` [RFC PATCH v1 21/22] PCI: cleanups for PCI bus lock implementation Jiang Liu
2012-09-11 23:21 ` Bjorn Helgaas
2012-09-12 8:58 ` Jiang Liu
2012-08-07 16:11 ` [RFC PATCH v1 22/22] PCI: unexport pci_root_buses Jiang Liu
2012-08-07 18:11 ` [RFC PATCH v1 00/22] introduce PCI bus lock to serialize PCI hotplug operations Don Dutile
2012-08-08 15:49 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAErSpo5ZQmzusUMuB7TobCH-Bzw=r78h8SGQ88-WqaH7nRSXkQ@mail.gmail.com' \
--to=bhelgaas@google.com \
--cc=ddutile@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=huxinwei@huawei.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liuj97@gmail.com \
--cc=rjw@sisk.pl \
--cc=wangyijing@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).