* [GIT PULL] PCI changes for v3.17 (part 3)
@ 2014-08-19 4:40 Bjorn Helgaas
2014-08-19 15:10 ` Fwd: " Murali Karicheri
0 siblings, 1 reply; 6+ messages in thread
From: Bjorn Helgaas @ 2014-08-19 4:40 UTC (permalink / raw)
To: Linus Torvalds
Cc: linux-pci, linux-kernel, Murali Karicheri,
Kishon Vijay Abraham I, Thierry Reding, Andrew Lunn
Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my
'next' branch just before leaving on vacation, but I forgot to include them
in my merge window pull request when I returned. They're low-risk, so I'm
sending them to you now (late), but the world won't end if they wait until
v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v3.17-changes-3
for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
----------------------------------------------------------------
PCI changes for v3.17 (part 3):
Marvell MVEBU
- Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
NVIDIA Tegra
- Add debugfs support (Thierry Reding)
Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
- Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: Remove ARCH_KIRKWOOD dependency
Bjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' into next
Kishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driver
Murali Karicheri (2):
PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
Thierry Reding (1):
PCI: tegra: Add debugfs support
.../devicetree/bindings/pci/designware-pcie.txt | 4 +
Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++
MAINTAINERS | 8 +
drivers/pci/host/Kconfig | 11 +-
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++
drivers/pci/host/pci-tegra.c | 118 ++++++
drivers/pci/host/pcie-designware.c | 134 ++++--
drivers/pci/host/pcie-designware.h | 11 +
9 files changed, 771 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
create mode 100644 drivers/pci/host/pci-dra7xx.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Fwd: [GIT PULL] PCI changes for v3.17 (part 3)
2014-08-19 4:40 [GIT PULL] PCI changes for v3.17 (part 3) Bjorn Helgaas
@ 2014-08-19 15:10 ` Murali Karicheri
2014-08-19 16:30 ` Bjorn Helgaas
0 siblings, 1 reply; 6+ messages in thread
From: Murali Karicheri @ 2014-08-19 15:10 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI
in this request. When do you think you can pull in Keystone PCI driver
(v8) on the list?
Thanks and regards,
Murali
-------- Original Message --------
Subject: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Mon, 18 Aug 2014 22:40:50 -0600
From: Bjorn Helgaas <bhelgaas@google.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
CC: <linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>, "Murali
Karicheri" <m-karicheri2@ti.com>, Kishon Vijay Abraham I
<kishon@ti.com>, Thierry Reding <treding@nvidia.com>, Andrew Lunn
<andrew@lunn.ch>
Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my
'next' branch just before leaving on vacation, but I forgot to include them
in my merge window pull request when I returned. They're low-risk, so I'm
sending them to you now (late), but the world won't end if they wait until
v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and
'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
tags/pci-v3.17-changes-3
for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
----------------------------------------------------------------
PCI changes for v3.17 (part 3):
Marvell MVEBU
- Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
NVIDIA Tegra
- Add debugfs support (Thierry Reding)
Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-related pcie_host_ops for v3.65 hardware
(Murali Karicheri)
- Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: Remove ARCH_KIRKWOOD dependency
Bjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next
Kishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driver
Murali Karicheri (2):
PCI: designware: Add config access-related pcie_host_ops for
v3.65 hardware
PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
Thierry Reding (1):
PCI: tegra: Add debugfs support
.../devicetree/bindings/pci/designware-pcie.txt | 4 +
Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++
MAINTAINERS | 8 +
drivers/pci/host/Kconfig | 11 +-
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-dra7xx.c | 458
+++++++++++++++++++++
drivers/pci/host/pci-tegra.c | 118 ++++++
drivers/pci/host/pcie-designware.c | 134 ++++--
drivers/pci/host/pcie-designware.h | 11 +
9 files changed, 771 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
create mode 100644 drivers/pci/host/pci-dra7xx.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] PCI changes for v3.17 (part 3)
2014-08-19 15:10 ` Fwd: " Murali Karicheri
@ 2014-08-19 16:30 ` Bjorn Helgaas
2014-08-19 17:02 ` Murali Karicheri
2014-09-02 14:52 ` Murali Karicheri
0 siblings, 2 replies; 6+ messages in thread
From: Bjorn Helgaas @ 2014-08-19 16:30 UTC (permalink / raw)
To: Murali Karicheri; +Cc: linux-pci
On Tue, Aug 19, 2014 at 10:10 AM, Murali Karicheri <m-karicheri2@ti.com> wrote:
> Hi Bjorn,
>
> I see you have pulled in my designware related patches for Keystone PCI in
> this request. When do you think you can pull in Keystone PCI driver (v8) on
> the list?
The things in this pull request have been in linux-next for a month.
I'm ready to apply the Keystone driver, but since we're after the
merge window and the Keystone driver hasn't been in -next at all, I
plan to put it in v3.18.
I know I hoped to get this in v3.17, but even if I merged it today I
would let it soak in -next for a week or so, and then we'd be past
v3.17-rc2, and that feels past the reasonable point for a pull
request.
Bjorn
> -------- Original Message --------
> Subject: [GIT PULL] PCI changes for v3.17 (part 3)
> Date: Mon, 18 Aug 2014 22:40:50 -0600
> From: Bjorn Helgaas <bhelgaas@google.com>
> To: Linus Torvalds <torvalds@linux-foundation.org>
> CC: <linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>, "Murali
> Karicheri" <m-karicheri2@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>,
> Thierry Reding <treding@nvidia.com>, Andrew Lunn <andrew@lunn.ch>
>
> Hi Linus,
>
> I screwed up. I intended these changes for v3.17, and I put them in my
> 'next' branch just before leaving on vacation, but I forgot to include them
> in my merge window pull request when I returned. They're low-risk, so I'm
> sending them to you now (late), but the world won't end if they wait until
> v3.18.
>
> The main reason to include them would be to support the TI DRA7xx.
>
> Bjorn
>
>
> The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
>
> Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
> 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and
> 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
> tags/pci-v3.17-changes-3
>
> for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
>
> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
> 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
>
> ----------------------------------------------------------------
> PCI changes for v3.17 (part 3):
>
> Marvell MVEBU
> - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
>
> NVIDIA Tegra
> - Add debugfs support (Thierry Reding)
>
> Synopsys DesignWare
> - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
> Abraham I)
> - Program ATU with untranslated address (Kishon Vijay Abraham I)
> - Add config access-related pcie_host_ops for v3.65 hardware (Murali
> Karicheri)
> - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
>
> TI DRA7xx
> - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
>
> ----------------------------------------------------------------
> Andrew Lunn (1):
> PCI: mvebu: Remove ARCH_KIRKWOOD dependency
>
> Bjorn Helgaas (1):
> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
> 'pci/host-tegra' into next
>
> Kishon Vijay Abraham I (3):
> PCI: designware: Look for configuration space in 'reg', not 'ranges'
> PCI: designware: Program ATU with untranslated address
> PCI: dra7xx: Add TI DRA7xx PCIe driver
>
> Murali Karicheri (2):
> PCI: designware: Add config access-related pcie_host_ops for v3.65
> hardware
> PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
>
> Thierry Reding (1):
> PCI: tegra: Add debugfs support
>
> .../devicetree/bindings/pci/designware-pcie.txt | 4 +
> Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++
> MAINTAINERS | 8 +
> drivers/pci/host/Kconfig | 11 +-
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-dra7xx.c | 458
> +++++++++++++++++++++
> drivers/pci/host/pci-tegra.c | 118 ++++++
> drivers/pci/host/pcie-designware.c | 134 ++++--
> drivers/pci/host/pcie-designware.h | 11 +
> 9 files changed, 771 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
> create mode 100644 drivers/pci/host/pci-dra7xx.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] PCI changes for v3.17 (part 3)
2014-08-19 16:30 ` Bjorn Helgaas
@ 2014-08-19 17:02 ` Murali Karicheri
2014-09-02 14:52 ` Murali Karicheri
1 sibling, 0 replies; 6+ messages in thread
From: Murali Karicheri @ 2014-08-19 17:02 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci
Bjorn,
On 08/19/2014 12:30 PM, Bjorn Helgaas wrote:
> On Tue, Aug 19, 2014 at 10:10 AM, Murali Karicheri<m-karicheri2@ti.com> wrote:
>> Hi Bjorn,
>>
>> I see you have pulled in my designware related patches for Keystone PCI in
>> this request. When do you think you can pull in Keystone PCI driver (v8) on
>> the list?
>
> The things in this pull request have been in linux-next for a month.
> I'm ready to apply the Keystone driver, but since we're after the
> merge window and the Keystone driver hasn't been in -next at all, I
> plan to put it in v3.18.
>
> I know I hoped to get this in v3.17, but even if I merged it today I
> would let it soak in -next for a week or so, and then we'd be past
> v3.17-rc2, and that feels past the reasonable point for a pull
> request.
>
Looks good to me. Thanks and regards,
Murali
> Bjorn
>
>> -------- Original Message --------
>> Subject: [GIT PULL] PCI changes for v3.17 (part 3)
>> Date: Mon, 18 Aug 2014 22:40:50 -0600
>> From: Bjorn Helgaas<bhelgaas@google.com>
>> To: Linus Torvalds<torvalds@linux-foundation.org>
>> CC:<linux-pci@vger.kernel.org>,<linux-kernel@vger.kernel.org>, "Murali
>> Karicheri"<m-karicheri2@ti.com>, Kishon Vijay Abraham I<kishon@ti.com>,
>> Thierry Reding<treding@nvidia.com>, Andrew Lunn<andrew@lunn.ch>
>>
>> Hi Linus,
>>
>> I screwed up. I intended these changes for v3.17, and I put them in my
>> 'next' branch just before leaving on vacation, but I forgot to include them
>> in my merge window pull request when I returned. They're low-risk, so I'm
>> sending them to you now (late), but the world won't end if they wait until
>> v3.18.
>>
>> The main reason to include them would be to support the TI DRA7xx.
>>
>> Bjorn
>>
>>
>> The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
>>
>> Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
>> 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and
>> 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
>> tags/pci-v3.17-changes-3
>>
>> for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
>>
>> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
>>
>> ----------------------------------------------------------------
>> PCI changes for v3.17 (part 3):
>>
>> Marvell MVEBU
>> - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
>>
>> NVIDIA Tegra
>> - Add debugfs support (Thierry Reding)
>>
>> Synopsys DesignWare
>> - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
>> Abraham I)
>> - Program ATU with untranslated address (Kishon Vijay Abraham I)
>> - Add config access-related pcie_host_ops for v3.65 hardware (Murali
>> Karicheri)
>> - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
>>
>> TI DRA7xx
>> - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
>>
>> ----------------------------------------------------------------
>> Andrew Lunn (1):
>> PCI: mvebu: Remove ARCH_KIRKWOOD dependency
>>
>> Bjorn Helgaas (1):
>> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next
>>
>> Kishon Vijay Abraham I (3):
>> PCI: designware: Look for configuration space in 'reg', not 'ranges'
>> PCI: designware: Program ATU with untranslated address
>> PCI: dra7xx: Add TI DRA7xx PCIe driver
>>
>> Murali Karicheri (2):
>> PCI: designware: Add config access-related pcie_host_ops for v3.65
>> hardware
>> PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
>>
>> Thierry Reding (1):
>> PCI: tegra: Add debugfs support
>>
>> .../devicetree/bindings/pci/designware-pcie.txt | 4 +
>> Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++
>> MAINTAINERS | 8 +
>> drivers/pci/host/Kconfig | 11 +-
>> drivers/pci/host/Makefile | 1 +
>> drivers/pci/host/pci-dra7xx.c | 458
>> +++++++++++++++++++++
>> drivers/pci/host/pci-tegra.c | 118 ++++++
>> drivers/pci/host/pcie-designware.c | 134 ++++--
>> drivers/pci/host/pcie-designware.h | 11 +
>> 9 files changed, 771 insertions(+), 33 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
>> create mode 100644 drivers/pci/host/pci-dra7xx.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] PCI changes for v3.17 (part 3)
2014-08-19 16:30 ` Bjorn Helgaas
2014-08-19 17:02 ` Murali Karicheri
@ 2014-09-02 14:52 ` Murali Karicheri
2014-09-04 21:05 ` Bjorn Helgaas
1 sibling, 1 reply; 6+ messages in thread
From: Murali Karicheri @ 2014-09-02 14:52 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci
On 08/19/2014 12:30 PM, Bjorn Helgaas wrote:
> On Tue, Aug 19, 2014 at 10:10 AM, Murali Karicheri<m-karicheri2@ti.com> wrote:
>> Hi Bjorn,
>>
>> I see you have pulled in my designware related patches for Keystone PCI in
>> this request. When do you think you can pull in Keystone PCI driver (v8) on
>> the list?
>
> The things in this pull request have been in linux-next for a month.
> I'm ready to apply the Keystone driver, but since we're after the
> merge window and the Keystone driver hasn't been in -next at all, I
> plan to put it in v3.18.
>
BJorn,
Do you have a v3.18 next branch that you can add this patch to? I need
to send out additional patches on top of this to support PCIe and SATA
on another K2 platform, K2E and will be good if I can base it on a
merged branch. Also I am afraid, we will have nasty merge issues to deal
with if others start making changes in parallel and conflict with this
patch series.
Thanks and regards,
Murali
> I know I hoped to get this in v3.17, but even if I merged it today I
> would let it soak in -next for a week or so, and then we'd be past
> v3.17-rc2, and that feels past the reasonable point for a pull
> request.
>
> Bjorn
>
>> -------- Original Message --------
>> Subject: [GIT PULL] PCI changes for v3.17 (part 3)
>> Date: Mon, 18 Aug 2014 22:40:50 -0600
>> From: Bjorn Helgaas<bhelgaas@google.com>
>> To: Linus Torvalds<torvalds@linux-foundation.org>
>> CC:<linux-pci@vger.kernel.org>,<linux-kernel@vger.kernel.org>, "Murali
>> Karicheri"<m-karicheri2@ti.com>, Kishon Vijay Abraham I<kishon@ti.com>,
>> Thierry Reding<treding@nvidia.com>, Andrew Lunn<andrew@lunn.ch>
>>
>> Hi Linus,
>>
>> I screwed up. I intended these changes for v3.17, and I put them in my
>> 'next' branch just before leaving on vacation, but I forgot to include them
>> in my merge window pull request when I returned. They're low-risk, so I'm
>> sending them to you now (late), but the world won't end if they wait until
>> v3.18.
>>
>> The main reason to include them would be to support the TI DRA7xx.
>>
>> Bjorn
>>
>>
>> The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
>>
>> Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
>> 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and
>> 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
>> tags/pci-v3.17-changes-3
>>
>> for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
>>
>> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
>>
>> ----------------------------------------------------------------
>> PCI changes for v3.17 (part 3):
>>
>> Marvell MVEBU
>> - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
>>
>> NVIDIA Tegra
>> - Add debugfs support (Thierry Reding)
>>
>> Synopsys DesignWare
>> - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
>> Abraham I)
>> - Program ATU with untranslated address (Kishon Vijay Abraham I)
>> - Add config access-related pcie_host_ops for v3.65 hardware (Murali
>> Karicheri)
>> - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
>>
>> TI DRA7xx
>> - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
>>
>> ----------------------------------------------------------------
>> Andrew Lunn (1):
>> PCI: mvebu: Remove ARCH_KIRKWOOD dependency
>>
>> Bjorn Helgaas (1):
>> Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next
>>
>> Kishon Vijay Abraham I (3):
>> PCI: designware: Look for configuration space in 'reg', not 'ranges'
>> PCI: designware: Program ATU with untranslated address
>> PCI: dra7xx: Add TI DRA7xx PCIe driver
>>
>> Murali Karicheri (2):
>> PCI: designware: Add config access-related pcie_host_ops for v3.65
>> hardware
>> PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
>>
>> Thierry Reding (1):
>> PCI: tegra: Add debugfs support
>>
>> .../devicetree/bindings/pci/designware-pcie.txt | 4 +
>> Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++
>> MAINTAINERS | 8 +
>> drivers/pci/host/Kconfig | 11 +-
>> drivers/pci/host/Makefile | 1 +
>> drivers/pci/host/pci-dra7xx.c | 458
>> +++++++++++++++++++++
>> drivers/pci/host/pci-tegra.c | 118 ++++++
>> drivers/pci/host/pcie-designware.c | 134 ++++--
>> drivers/pci/host/pcie-designware.h | 11 +
>> 9 files changed, 771 insertions(+), 33 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
>> create mode 100644 drivers/pci/host/pci-dra7xx.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] PCI changes for v3.17 (part 3)
2014-09-02 14:52 ` Murali Karicheri
@ 2014-09-04 21:05 ` Bjorn Helgaas
0 siblings, 0 replies; 6+ messages in thread
From: Bjorn Helgaas @ 2014-09-04 21:05 UTC (permalink / raw)
To: Murali Karicheri; +Cc: linux-pci
On Tue, Sep 2, 2014 at 8:52 AM, Murali Karicheri <m-karicheri2@ti.com> wrote:
> On 08/19/2014 12:30 PM, Bjorn Helgaas wrote:
>>
>> On Tue, Aug 19, 2014 at 10:10 AM, Murali Karicheri<m-karicheri2@ti.com>
>> wrote:
>>>
>>> Hi Bjorn,
>>>
>>> I see you have pulled in my designware related patches for Keystone PCI
>>> in
>>> this request. When do you think you can pull in Keystone PCI driver (v8)
>>> on
>>> the list?
>>
>>
>> The things in this pull request have been in linux-next for a month.
>> I'm ready to apply the Keystone driver, but since we're after the
>> merge window and the Keystone driver hasn't been in -next at all, I
>> plan to put it in v3.18.
>>
> BJorn,
>
> Do you have a v3.18 next branch that you can add this patch to? I need to
> send out additional patches on top of this to support PCIe and SATA on
> another K2 platform, K2E and will be good if I can base it on a merged
> branch. Also I am afraid, we will have nasty merge issues to deal with if
> others start making changes in parallel and conflict with this patch series.
Yes. I put it on a pci/host-keystone branch for v3.18.
Bjorn
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-09-04 21:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-08-19 4:40 [GIT PULL] PCI changes for v3.17 (part 3) Bjorn Helgaas
2014-08-19 15:10 ` Fwd: " Murali Karicheri
2014-08-19 16:30 ` Bjorn Helgaas
2014-08-19 17:02 ` Murali Karicheri
2014-09-02 14:52 ` Murali Karicheri
2014-09-04 21:05 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).