From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Austin Bolen <austin_bolen@dell.com>,
Keith Busch <keith.busch@intel.com>,
Alexandru Gagniuc <mr.nuke.me@gmail.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
"Gustavo A . R . Silva" <gustavo@embeddedor.com>,
Sinan Kaya <okaya@kernel.org>,
Oza Pawandeep <poza@codeaurora.org>,
linux-pci@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Lukas Wunner <lukas@wunner.de>
Subject: Re: [PATCH v4 3/3] PCI: pciehp: Add dmi table for in-band presence disabled
Date: Fri, 25 Oct 2019 22:18:06 +0300 [thread overview]
Message-ID: <CAHp75Vdx9xVzgjPAxdMoSB=ZZx+Kc6yE4Ko3fn-gC6_+JtmT4g@mail.gmail.com> (raw)
In-Reply-To: <20191025190047.38130-4-stuart.w.hayes@gmail.com>
On Fri, Oct 25, 2019 at 10:01 PM Stuart Hayes <stuart.w.hayes@gmail.com> wrote:
>
> Some systems have in-band presence detection disabled for hot-plug PCI
> slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
> On these systems, presence detect can become active well after the link is
> reported to be active, which can cause the slots to be disabled after a
> device is connected.
>
> Add a dmi table to flag these systems as having in-band presence disabled.
>
FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
> ---
> v4
> add comment to dmi table
>
> drivers/pci/hotplug/pciehp_hpc.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 02d95ab27a12..9541735bd0aa 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -14,6 +14,7 @@
>
> #define dev_fmt(fmt) "pciehp: " fmt
>
> +#include <linux/dmi.h>
> #include <linux/kernel.h>
> #include <linux/types.h>
> #include <linux/jiffies.h>
> @@ -26,6 +27,24 @@
> #include "../pci.h"
> #include "pciehp.h"
>
> +static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
> + /*
> + * Match all Dell systems, as some Dell systems have inband
> + * presence disabled on NVMe slots (but don't support the bit to
> + * report it). Setting inband presence disabled should have no
> + * negative effect, except on broken hotplug slots that never
> + * assert presence detect--and those will still work, they will
> + * just have a bit of extra delay before being probed.
> + */
> + {
> + .ident = "Dell System",
> + .matches = {
> + DMI_MATCH(DMI_OEM_STRING, "Dell System"),
> + },
> + },
> + {}
> +};
> +
> static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
> {
> return ctrl->pcie->port;
> @@ -895,6 +914,9 @@ struct controller *pcie_init(struct pcie_device *dev)
> ctrl->inband_presence_disabled = 1;
> }
>
> + if (dmi_first_match(inband_presence_disabled_dmi_table))
> + ctrl->inband_presence_disabled = 1;
> +
> /*
> * If empty slot's power status is on, turn power off. The IRQ isn't
> * requested yet, so avoid triggering a notification with this command.
> --
> 2.18.1
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2019-10-25 19:18 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-25 19:00 [PATCH v4 0/3] PCI: pciehp: Do not turn off slot if presence comes up after link Stuart Hayes
2019-10-25 19:00 ` [PATCH v4 1/3] PCI: pciehp: Add support for disabling in-band presence Stuart Hayes
2019-10-25 19:15 ` Andy Shevchenko
2019-11-27 1:36 ` Bjorn Helgaas
2019-11-27 2:19 ` Stuart Hayes
2019-12-31 22:06 ` Stuart Hayes
2020-01-29 13:15 ` Libor Pechacek
2019-10-25 19:00 ` [PATCH v4 2/3] PCI: pciehp: Wait for PDS if in-band presence is disabled Stuart Hayes
2019-10-25 19:16 ` Andy Shevchenko
2019-10-25 19:00 ` [PATCH v4 3/3] PCI: pciehp: Add dmi table for in-band presence disabled Stuart Hayes
2019-10-25 19:18 ` Andy Shevchenko [this message]
2020-02-21 5:21 ` Bjorn Helgaas
2020-02-21 17:46 ` Stuart Hayes
2019-10-28 11:31 ` [PATCH v4 0/3] PCI: pciehp: Do not turn off slot if presence comes up after link Mika Westerberg
2020-02-08 20:22 ` Lukas Wunner
2020-02-11 0:08 ` Bjorn Helgaas
2020-02-11 4:49 ` Lukas Wunner
2020-02-11 14:14 ` Bjorn Helgaas
2020-02-11 14:32 ` Lukas Wunner
2020-02-11 19:31 ` Bjorn Helgaas
2020-02-18 17:32 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHp75Vdx9xVzgjPAxdMoSB=ZZx+Kc6yE4Ko3fn-gC6_+JtmT4g@mail.gmail.com' \
--to=andy.shevchenko@gmail.com \
--cc=austin_bolen@dell.com \
--cc=bhelgaas@google.com \
--cc=gustavo@embeddedor.com \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mika.westerberg@linux.intel.com \
--cc=mr.nuke.me@gmail.com \
--cc=okaya@kernel.org \
--cc=poza@codeaurora.org \
--cc=rafael.j.wysocki@intel.com \
--cc=stuart.w.hayes@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).