From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.0 required=3.0 tests=BAYES_00,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D7F17C07E96 for ; Thu, 8 Jul 2021 12:40:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B4E5E61430 for ; Thu, 8 Jul 2021 12:40:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230433AbhGHMmn (ORCPT ); Thu, 8 Jul 2021 08:42:43 -0400 Received: from mail-ot1-f50.google.com ([209.85.210.50]:33791 "EHLO mail-ot1-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229659AbhGHMmn (ORCPT ); Thu, 8 Jul 2021 08:42:43 -0400 Received: by mail-ot1-f50.google.com with SMTP id o17-20020a9d76510000b02903eabfc221a9so5730038otl.0; Thu, 08 Jul 2021 05:40:00 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=hXbnxkh1u8AFOZQPHO70gyfcmpg1urIR6x4lG5zDlT4=; b=PPWr/8JMX3iLy9VHX3CZ0Ra25HD521+87m9eNKX70PoTT0+5YRG58RuPoL9GrYbEg2 dIX+Dl/iU2Kexbnk7lKNWnTe0pE2sLi1vjD16i8IWCggvdaHbNzo7KmYlbvwXPohBZwW 1iOCr7BPHZ5ad1hP1rdlga9klNVizwzhGAVLsR6gl7AgT7G0QNn9J5ei1VcSeAwXvuWg 8s9N/cIBv+7fqNSzrJm8ef5uT3iI1LpOZ0pQ6zZ3pv7UZ48ZPchXRKp/3e2uPAGaMBCh WqOySet0RkhCJzdbgYqKCkQXsEIoVjx9stCf28f5g48Ou/lAHPuyBrQlBERgX0NCgs09 A7aw== X-Gm-Message-State: AOAM533Mdx2GWartc1z0PHB8RkSojqJMGl0NEisfImgAgdxQMRdYWTBD psp+YS/MWCzLYZKVHgQLx4WT9JZdCBEigXn2gBE= X-Google-Smtp-Source: ABdhPJwBJkw2Nbgb5ykp7SryqQ02tPiJJPka8ki4Lit6j8cowBFSyZvSAoiRKILWtQYOXoE/WSNKEnD7v30XnuxOKXg= X-Received: by 2002:a9d:604e:: with SMTP id v14mr23515869otj.260.1625748000130; Thu, 08 Jul 2021 05:40:00 -0700 (PDT) MIME-Version: 1.0 References: <20210617123653.58640-1-mika.westerberg@linux.intel.com> <20210707215728.GA214645@bjorn-Precision-5520> In-Reply-To: From: "Rafael J. Wysocki" Date: Thu, 8 Jul 2021 14:39:49 +0200 Message-ID: Subject: Re: [PATCH v4] PCI/PM: Target PM state is D3hot if device can only generate PME from D3cold To: Bjorn Helgaas Cc: Mika Westerberg , Bjorn Helgaas , "Rafael J. Wysocki" , Utkarsh H Patel , Koba Ko , Rajat Jain , Kai-Heng Feng , Linux PCI , Linux PM Content-Type: text/plain; charset="UTF-8" Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org On Thu, Jul 8, 2021 at 2:18 PM Rafael J. Wysocki wrote: > > On Wed, Jul 7, 2021 at 11:57 PM Bjorn Helgaas wrote: > > > > On Thu, Jun 17, 2021 at 03:36:53PM +0300, Mika Westerberg wrote: > > > Some PCIe devices only support PME (Power Management Event) from D3cold. > > > One example is ASMedia xHCI controller: > > > > > > 11:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller (prog-if 30 [XHCI]) > > > ... > > > Capabilities: [78] Power Management version 3 > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+) > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > > > > > With such devices, if it has wake enabled, the kernel selects lowest > > > possible power state to be D0 in pci_target_state(). This is problematic > > > because it prevents the root port it is connected to enter low power > > > state too which makes the system consume more energy than necessary. > > > > IIUC this is because the loop that checks which states support PME > > starts with D3hot and doesn't even look at D3cold. > > That's because the device itself cannot be programmed into D3cold, so > the target state cannot be D3cold for it. > > > > The problem in pci_target_state() is that it only accounts the "current" > > > device state, so when the bridge above it (a root port for instance) is > > > transitioned into D3hot the device transitions into D3cold. This is > > > because when the root port is first transitioned into D3hot then the > > > ACPI power resource is turned off which puts the PCIe link to L2/L3 (and > > > the root port and the device are in D3cold). If the root port is kept in > > > D3hot it still means that the device below it is still effectively in > > > D3cold as no configuration messages pass through. Furthermore the > > > implementation note of PCIe 5.0 sec 5.3.1.4 says that the device should > > > expect to be transitioned into D3cold soon after its link transitions > > > into L2/L3 Ready state. > > > > > > Taking the above into consideration, instead of forcing the device stay > > > in D0 we modify pci_target_state() to return D3hot in this special case > > > and make __pci_enable_wake() to enable PME too in this case. > > > > > > Reported-by: Utkarsh H Patel > > > Reported-by: Koba Ko > > > Suggested-by: Rafael J. Wysocki > > > Signed-off-by: Mika Westerberg > > > --- > > > The previous version of the patch is here: > > > > > > https://lore.kernel.org/linux-pm/20210616150516.28242-1-mika.westerberg@linux.intel.com/ > > > > > > Changes from the previous version: > > > > > > * Dropped redundant test in pci_target_state(). > > > > > > drivers/pci/pci.c | 16 +++++++++++++++- > > > 1 file changed, 15 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index b717680377a9..043c5c304308 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -2485,7 +2485,13 @@ static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable > > > if (enable) { > > > int error; > > > > > > - if (pci_pme_capable(dev, state)) > > > + /* > > > + * Enable PME if device is capable from given state. > > > + * Special case is device that can only generate PME > > > + * from D3cold then we enable PME too. > > > + */ > > > + if (pci_pme_capable(dev, state) || > > > + (state == PCI_D3hot && pci_pme_capable(dev, PCI_D3cold))) > > > pci_pme_active(dev, true); > > > else > > > ret = 1; > > > @@ -2595,6 +2601,14 @@ static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup) > > > * PME#. > > > */ > > > if (dev->pme_support) { > > > + /* > > > + * Special case if device supports only PME from > > > + * D3cold but not from D3hot we still return D3hot. > > > + */ > > > + if (target_state == PCI_D3hot && > > > + (dev->pme_support & (1 << PCI_D3cold))) > > > + return target_state; > > > > I've spent quite a bit of time trying to understand this, and I'm kind > > of dragging my feet on it because I haven't been able to really > > connect this with the specs. > > The specs aren't very clear in this area, though. > > The overall picture is that the device in question is connected to a > port (a root port in this particular case) that can be programmed into > D3cold via ACPI, but the endpoint itself can only be programmed into > D3hot. However, if the port goes into D3cold, the endpoint also goes > into D3cold (actually, my understanding of the specs is that even if > the port goes into D3hot, the endpoint should still be assumed to go > into D3cold). > > The power state of the endpoint is changed first and at the time this > happens it is not known which power state the port is going to be > programmed into. > > Now, the device is wake-capable (in general) and so we want it to be > able to signal wakeup from the final power state. Because it only > reports PME support in D0 and in D3cold, the kernel today leaves it in > D0 which causes the port to stay in D0 too. Still, putting the device > into D3hot allows the port to go into D3cold which in turn causes the > device to go into D3cold and it can signal wakeup from that state. > > So there are two ways to get into a configuration from which the > endpoint device can signal wakeup, either by leaving it and the port > holding it both in D0, or by putting it into D3hot, so that the port > can go into D3cold in which case the endpoint will end up in D3cold. > > The Mika's patch is aiming at enabling the second option. > > > It also seems unfortunate to have to add this special case in two places. > > That's because __pci_enable_wake() tries to be extra careful and only > call pci_pme_active() if PME is known to be supported in the target > power state, but that is not strictly necessary. It could just call > pci_pme_active() unconditionally and return the > platform_pci_set_wakeup() return value. > > I think I'll send a patch making this change. Actually, it needs to fail if PME cannot be signaled from the target state and the device is not power-manageable by the platform. A better idea may be to make pci_pme_capable() also check if the parent bridge can go into D3cold and return "true" if so and "state" is D3hot while PME signaling from D3cold is supported.