From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Thomas Richard <thomas.richard@bootlin.com>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Tony Lindgren" <tony@atomide.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
"Vignesh R" <vigneshr@ti.com>,
"Andi Shyti" <andi.shyti@kernel.org>,
"Peter Rosin" <peda@axentia.se>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Siddharth Vadapalli" <s-vadapalli@ti.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
gregory.clement@bootlin.com, theo.lebrun@bootlin.com,
thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
"Bartosz Golaszewski" <bartosz.golaszewski@linaro.org>,
"Andy Shevchenko" <andy.shevchenko@gmail.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>
Subject: Re: [PATCH v5 01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()
Date: Tue, 23 Apr 2024 11:42:12 +0200 [thread overview]
Message-ID: <CAMuHMdVnKX23yi7ir1LVxfXAMeeWMFzM+cdgSSTNjpn1OnC2xw@mail.gmail.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v5-1-4b8c46711ded@bootlin.com>
Hi Thomas,
On Tue, Apr 16, 2024 at 3:31 PM Thomas Richard
<thomas.richard@bootlin.com> wrote:
> Some IOs can be needed during suspend_noirq()/resume_noirq().
> So move suspend()/resume() to noirq.
>
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Thanks for your patch, which is now commit 86eb98127332748f ("gpio:
pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()")
in i2c-host/i2c/i2c-host.
This patch causes regressions on e.g. Salvator-XS.
s2idle:
Freezing user space processes
Freezing user space processes completed (elapsed 0.006 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.003 seconds)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
+i2c-rcar e66d8000.i2c: error -16 : 10000005
+pca953x 4-0020: Failed to sync GPIO dir registers: -16
+pca953x 4-0020: Failed to restore register map: -16
+pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -16
+pca953x 4-0020: PM: failed to resume async noirq: error -16
s2ram:
Detected VIPT I-cache on CPU7
CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
CPU7 is up
+i2c-rcar e66d8000.i2c: error -110 : 10000001
+pca953x 4-0020: Failed to sync GPIO dir registers: -110
+pca953x 4-0020: Failed to restore register map: -110
+pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -110
+pca953x 4-0020: PM: failed to resume async noirq: error -110
usb usb1: root hub lost power or was reset
...
PM: suspend exit
ata1: link resume succeeded after 1 retries
-ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
-sd 0:0:0:0: [sda] Starting disk
-ata1.00: configured for UDMA/133
-ata1.00: Entering active power mode
+ata1: SATA link down (SStatus 0 SControl 300)
+ata1: link resume succeeded after 1 retries
+ata1: SATA link down (SStatus 0 SControl 300)
+ata1: limiting SATA link speed to <unknown>
+ata1: link resume succeeded after 1 retries
+ata1: SATA link down (SStatus 0 SControl 3F0)
+ata1.00: disable device
+ata1.00: detaching (SCSI 0:0:0:0)
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK
When trying to read from /dev/sda afterwards:
ata1: link resume succeeded after 1 retries
ata1: SATA link down (SStatus 0 SControl 3F0)
ata1.00: disable device
ata1.00: detaching (SCSI 0:0:0:0)
device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x80700 phys_seg 4 prio class 0
device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sda, logical block 0, async page read
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK
All issues above are fixed by reverting this commit.
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -1234,7 +1234,7 @@ static void pca953x_save_context(struct pca953x_chip *chip)
> regcache_cache_only(chip->regmap, true);
> }
>
> -static int pca953x_suspend(struct device *dev)
> +static int pca953x_suspend_noirq(struct device *dev)
> {
> struct pca953x_chip *chip = dev_get_drvdata(dev);
>
> @@ -1248,7 +1248,7 @@ static int pca953x_suspend(struct device *dev)
> return 0;
> }
>
> -static int pca953x_resume(struct device *dev)
> +static int pca953x_resume_noirq(struct device *dev)
> {
> struct pca953x_chip *chip = dev_get_drvdata(dev);
> int ret;
> @@ -1268,7 +1268,8 @@ static int pca953x_resume(struct device *dev)
> return ret;
> }
>
> -static DEFINE_SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
> +static DEFINE_NOIRQ_DEV_PM_OPS(pca953x_pm_ops,
> + pca953x_suspend_noirq, pca953x_resume_noirq);
>
> /* convenience to stop overlong match-table lines */
> #define OF_653X(__nrgpio, __int) ((void *)(__nrgpio | PCAL653X_TYPE | __int))
>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2024-04-23 9:42 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-16 13:29 [PATCH v5 00/11] Add suspend to ram support for PCIe on J7200 Thomas Richard
2024-04-16 13:29 ` [PATCH v5 01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq() Thomas Richard
2024-04-23 9:42 ` Geert Uytterhoeven [this message]
2024-04-23 10:34 ` Andy Shevchenko
2024-04-23 10:53 ` Thomas Richard
2024-04-23 15:31 ` Geert Uytterhoeven
2024-04-16 13:29 ` [PATCH v5 02/11] i2c: omap: wakeup the controller during suspend() callback Thomas Richard
2024-04-19 8:47 ` Andi Shyti
2024-04-22 9:40 ` Thomas Richard
2024-04-22 19:44 ` Bjorn Helgaas
2024-04-24 10:24 ` Thomas Richard
2024-04-16 13:29 ` [PATCH v5 03/11] mux: add mux_chip_resume() function Thomas Richard
2024-04-16 13:29 ` [PATCH v5 04/11] mux: mmio: add resume support Thomas Richard
2024-04-16 13:29 ` [PATCH v5 05/11] PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup() Thomas Richard
2024-04-16 14:16 ` Dan Carpenter
2024-04-16 16:01 ` Thomas Richard
2024-04-16 13:29 ` [PATCH v5 06/11] PCI: cadence: Set cdns_pcie_host_init() global Thomas Richard
2024-04-16 13:29 ` [PATCH v5 07/11] PCI: j721e: Use dev_err_probe() in the probe() function Thomas Richard
2024-04-16 13:29 ` [PATCH v5 08/11] PCI: j721e: Add reset GPIO to struct j721e_pcie Thomas Richard
2024-04-16 13:29 ` [PATCH v5 09/11] PCI: Add T_PERST_CLK_US macro Thomas Richard
2024-04-16 13:29 ` [PATCH v5 10/11] PCI: j721e: Use " Thomas Richard
2024-04-16 13:30 ` [PATCH v5 11/11] PCI: j721e: Add suspend and resume support Thomas Richard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMuHMdVnKX23yi7ir1LVxfXAMeeWMFzM+cdgSSTNjpn1OnC2xw@mail.gmail.com \
--to=geert@linux-m68k.org \
--cc=aaro.koskinen@iki.fi \
--cc=andi.shyti@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=gregory.clement@bootlin.com \
--cc=jmkrzyszt@gmail.com \
--cc=kw@linux.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=thomas.richard@bootlin.com \
--cc=tony@atomide.com \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).