Re: [RFC PATCH v3 2/4] PCI/doe: Add Data Object Exchange support

[Dan Williams <dan.j.williams@intel.com>]

On Tue, May 18, 2021 at 3:06 AM Jonathan Cameron
<Jonathan.Cameron@huawei.com> wrote:
>
> On Mon, 17 May 2021 10:21:14 -0700
> Dan Williams <dan.j.williams@intel.com> wrote:
>
> > On Mon, May 17, 2021 at 1:42 AM Jonathan Cameron
> > <Jonathan.Cameron@huawei.com> wrote:
> > >
> > > On Fri, 14 May 2021 11:37:12 -0700
> > > Dan Williams <dan.j.williams@intel.com> wrote:
> > >
> > > > On Fri, May 14, 2021 at 1:50 AM Jonathan Cameron
> > > > <Jonathan.Cameron@huawei.com> wrote:
> > > > [..]
> > > > > > If it simplifies the kernel implementation to assume single
> > > > > > kernel-initiator then I think that's more than enough reason to block
> > > > > > out userspace, and/or provide userspace a method to get into the
> > > > > > kernel's queue for service.
> > > > >
> > > > > This last suggestion makes sense to me. Let's provide a 'right' way
> > > > > to access the DOE from user space. I like the idea if it being possible
> > > > > to run CXL compliance tests from userspace whilst the driver is loaded.
> > > >
> > > > Ah, and I like your observation that once the kernel provides a
> > > > "right" way to access DOE then userspace direct-access of DOE is
> > > > indeed a "you get to keep the pieces" event like any other unwanted
> > > > userspace config-write.
> > > >
> > > > > Bjorn, given this would be a generic PCI thing, any preference for what
> > > > > this interface might look like?   /dev/pcidoe[xxxxxx].i with ioctls similar
> > > > > to those for the BAR based CXL mailboxes?
> > > >
> > > > (warning, anti-ioctl bias incoming...)
> > >
> > > I feel very similar about ioctls - my immediate thought was to shove this in
> > > debugfs, but that feels the wrong choice if we are trying to persuade people
> > > to use it instead of writing code that directly accesses the config space.
> > >
> > > >
> > > > Hmm, DOE has an enumeration capability, could the DOE driver use a
> > > > scheme to have a sysfs bin_attr per discovered object type? This would
> > > > make it simliar to the pci-vpd sysfs interface.
> > >
> > > We can discover the protocols, but anything beyond that is protocol
> > > specific.  I don't think there is a enough info available by any standards
> > > defined method. Also part of the reason to allow a safe userspace interface
> > > would be to provide a generic interface for vendor protocols and things like
> > > CXL compliance tests where we will almost certainly never provide a more
> > > specific kernel interface.
> > >
> > > Whilst sysfs would work for CDAT, some protocols are challenge response rather
> > > than simple read back and that really doesn't fit well for sysfs model.
> > > If we get other protocols that are simple data read back, then I would
> > > advocate giving them a simple sysfs interface much like proposed for CDAT
> > > as it will always be simpler to use + self describing.
> > >
> > > On a lesser note it might be helpful to provide sysfs attrs for
> > > what protocols are supported.  The alternative is to let userspace run
> > > the discovery protocol. Perhaps we can do this as a later phase.
> > >
> > > >
> > > > Then the kernel could cache objects like CDAT that don't change
> > > > outside of some invalidation event.
> > >
> > > It's been a while since I last saw any conversation on sysfs bin_attrs
> > > but mostly I thought the feeling was pretty strongly against them for anything
> > > but a few niche usecases.
> > >
> > > Feels to me like it would break most of the usual rules in a way vpd does
> > > not (IIRC VPD is supposed to be a simple in the sense that if you write a value
> > > to a writable part, you will read back the same value).
> > >
> > > +CC Greg who is a fount of knowledge in this area (and regularly + correctly
> > > screams at the ways I try to abuse sysfs :)  Note I don't think Dan was
> > > suggesting implementing response / request directly, but I think that is
> > > all we could do given DOE protocols can be vendor specific and the standard
> > > discovery protocol doesn't let us know the fine grained support (what commands
> > > within a given protocol).
> >
> > I'm not all that interested in supporting vendor defined DOE
> > shenanigans. There's more than enough published DOE protocols that the
> > kernel could limit its support to the known set. This is similar to
> > how ACPI DSMs are not generically supported, but when they appear in a
> > published specification the kernel may then grow the support. The
> > supported protocols could be limited to: CDAT, PCIe IDE, CXL
> > Compliance, etc...
> >
> > Vendor specific DOE is in the same class as unfettered /dev/mem
> > access, first you need to disable the kernel's integrity and
> > confidentiality protections, and then you can do whatever you want. If
> > a vendor wants a DOE protocol supported in the "trusted" set they can
> > simply publish the specification and send the proper support patches.
>
> Fair enough, though the interface should be root only, so a vendor shooting
> themselves in the foot this way would be no different to using pcitools
> to access the device directly (we are just providing safety from concurrency
> point of view).
>
> Anyway, I can see two options for how to do this.
>
> 1) Per protocol interface. Would not be generic, as these work in entirely
>    different ways (some are simple read back of tables, some require complex
>    cycles of operations in the right order with data flowing in both directions)
> 2) White list those protocols we are going to let through a generic interface
>    Not including CXL compliance for instance as that has nasty side effects!
>
> If we want to enable userspace DOE access, I prefer option 2.
>
> Note that I wasn't that keen on a userspace interface in the first place as
> in my view these should all be handled in kernel.
> Ultimately we should have case 1 if userspace access make sense.
> However, if we do this we shouldn't pretend we are providing userspace
> access to the DOE at all.  We are providing interfaces to things that just
> happen to be implemented using DOE under the hood.
>
> I have a prototype of a trivial ioctl based interface. I'll send it out
> as an RFC later this week.  Might add a white list, depending on where
> this discussion goes.
>

I'd say let's do this in typical Linux fashion and not solve future
problems before they need to be solved. I.e. start small and build
incrementally. To me that looks like a sysfs interface to convey a
cached copy of a CDAT with an internal interface for a driver to
trigger invalidations and re-reads on the next access. This would
assume that userspace may have left the DOE in an indeterminate state
and an abort cycle may be needed. A 1 second delay for the rare case
where a collision is detected seems reasonable for just CDAT
retrieval.