From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"andrew.murray@arm.com" <andrew.murray@arm.com>,
"arnd@arndb.de" <arnd@arndb.de>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
"m.karthikeyan@mobiveil.co.in" <m.karthikeyan@mobiveil.co.in>,
Leo Li <leoyang.li@nxp.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>,
Mingkai Hu <mingkai.hu@nxp.com>,
"M.h. Lian" <minghuan.lian@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: RE: [PATCHv10 12/13] arm64: dts: lx2160a: Add PCIe controller DT nodes
Date: Mon, 24 Feb 2020 06:11:33 +0000 [thread overview]
Message-ID: <DB8PR04MB67477DDF8E9176070387C3B784EC0@DB8PR04MB6747.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20200224012809.GB14331@dragon>
Hi Shawn,
> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2020年2月24日 9:28
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelgaas@google.com; robh+dt@kernel.org; andrew.murray@arm.com;
> arnd@arndb.de; mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> m.karthikeyan@mobiveil.co.in; Leo Li <leoyang.li@nxp.com>;
> lorenzo.pieralisi@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: Re: [PATCHv10 12/13] arm64: dts: lx2160a: Add PCIe controller DT
> nodes
>
> On Thu, Feb 13, 2020 at 12:06:43PM +0800, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > The LX2160A integrated 6 PCIe Gen4 controllers.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> > ---
> > V10:
> > - No change
> >
> > .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 163
> > ++++++++++++++++++
> > 1 file changed, 163 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > index e5ee5591e52b..aee2810d91cc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > @@ -1076,5 +1076,168 @@
> > };
> > };
> > };
> > +
> > + pcie@3400000 {
>
> The nodes should be sorted in unit-address. That said, they should be
> added after ata3: sata@3230000.
>
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03400000 0x0 0x00100000 /* controller
> registers */
> > + 0x80 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 111
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 112
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3500000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03500000 0x0 0x00100000 /* controller
> registers */
> > + 0x88 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 115
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 116
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 117
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3600000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03600000 0x0 0x00100000 /* controller
> registers */
> > + 0x90 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <256>;
> > + ppio-wins = <24>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 120
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 121
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 122
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3700000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03700000 0x0 0x00100000 /* controller
> registers */
> > + 0x98 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 125
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 126
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 127
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3800000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03800000 0x0 0x00100000 /* controller
> registers */
> > + 0xa0 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <256>;
> > + ppio-wins = <24>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 130
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 131
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 132
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3900000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03900000 0x0 0x00100000 /* controller
> registers */
> > + 0xa8 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 107
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
>
> Unnecessary newline.
>
> I fixed them up and applied the patch.
Thanks a lot for your help!
Thanks,
Zhiqiang
>
> Shawn
>
> > };
> > };
> > --
> > 2.17.1
> >
next prev parent reply other threads:[~2020-02-24 6:11 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-13 4:06 [PATCHv10 00/13] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Zhiqiang Hou
2020-02-13 4:06 ` [PATCHv10 01/13] PCI: mobiveil: Introduce a new structure mobiveil_root_port Zhiqiang Hou
2020-02-20 17:12 ` Andrew Murray
2020-02-24 5:45 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 02/13] PCI: mobiveil: Move the host initialization into a function Zhiqiang Hou
2020-02-20 17:19 ` Andrew Murray
2020-02-24 5:48 ` Z.q. Hou
2020-02-21 12:15 ` Lorenzo Pieralisi
2020-02-13 4:06 ` [PATCHv10 03/13] PCI: mobiveil: Collect the interrupt related operations " Zhiqiang Hou
2020-02-20 17:23 ` Andrew Murray
2020-02-24 5:49 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 04/13] PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driver Zhiqiang Hou
2020-02-13 4:06 ` [PATCHv10 05/13] PCI: mobiveil: Add callback function for interrupt initialization Zhiqiang Hou
2020-02-20 17:25 ` Andrew Murray
2020-02-24 5:49 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 06/13] PCI: mobiveil: Add callback function for link up check Zhiqiang Hou
2020-02-13 4:06 ` [PATCHv10 07/13] PCI: mobiveil: Allow mobiveil_host_init() to be used to re-init host Zhiqiang Hou
2020-02-20 17:28 ` Andrew Murray
2020-02-24 5:49 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 08/13] PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors Zhiqiang Hou
2020-02-20 17:29 ` Andrew Murray
2020-02-24 5:50 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 09/13] PCI: mobiveil: Add Header Type field check Zhiqiang Hou
2020-02-20 17:31 ` Andrew Murray
2020-02-24 5:50 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 10/13] dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller Zhiqiang Hou
2020-02-13 4:06 ` [PATCHv10 11/13] PCI: mobiveil: Add PCIe Gen4 RC driver for NXP Layerscape SoCs Zhiqiang Hou
2020-02-20 17:43 ` Andrew Murray
2020-02-24 5:50 ` Z.q. Hou
2020-02-21 12:17 ` Lorenzo Pieralisi
2020-02-24 5:58 ` Z.q. Hou
2020-02-13 4:06 ` [PATCHv10 12/13] arm64: dts: lx2160a: Add PCIe controller DT nodes Zhiqiang Hou
2020-02-24 1:28 ` Shawn Guo
2020-02-24 6:11 ` Z.q. Hou [this message]
2020-02-13 4:06 ` [PATCHv10 13/13] arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 Zhiqiang Hou
2020-02-24 1:29 ` Shawn Guo
2020-02-21 12:19 ` [PATCHv10 00/13] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Lorenzo Pieralisi
2020-02-24 6:07 ` Z.q. Hou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB8PR04MB67477DDF8E9176070387C3B784EC0@DB8PR04MB6747.eurprd04.prod.outlook.com \
--to=zhiqiang.hou@nxp.com \
--cc=andrew.murray@arm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m.karthikeyan@mobiveil.co.in \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).