Re: [PATCH mlx5-next v6 1/4] PCI: Add sysfs callback to allow MSI-X table size change of SR-IOV VFs

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Sat, Feb 20, 2021 at 01:06:00PM -0600, Bjorn Helgaas wrote:
> On Fri, Feb 19, 2021 at 09:20:18AM +0100, Greg Kroah-Hartman wrote:
> 
> > Ok, can you step back and try to explain what problem you are trying to
> > solve first, before getting bogged down in odd details?  I find it
> > highly unlikely that this is something "unique", but I could be wrong as
> > I do not understand what you are wanting to do here at all.
> 
> We want to add two new sysfs files:
> 
>   sriov_vf_total_msix, for PF devices
>   sriov_vf_msix_count, for VF devices associated with the PF
> 
> AFAICT it is *acceptable* if they are both present always.  But it
> would be *ideal* if they were only present when a driver that
> implements the ->sriov_get_vf_total_msix() callback is bound to the
> PF.

Ok, so in the pci bus probe function, if the driver that successfully
binds to the device is of this type, then create the sysfs files.

The driver core will properly emit a KOBJ_BIND message when the driver
is bound to the device, so userspace knows it is now safe to rescan the
device to see any new attributes.

Here's some horrible pseudo-patch for where this probably should be
done:


diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index ec44a79e951a..5a854a5e3977 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -307,8 +307,14 @@ static long local_pci_probe(void *_ddi)
 	pm_runtime_get_sync(dev);
 	pci_dev->driver = pci_drv;
 	rc = pci_drv->probe(pci_dev, ddi->id);
-	if (!rc)
+	if (!rc) {
+		/* If PF or FV driver was bound, let's add some more sysfs files */
+		if (pci_drv->is_pf)
+			device_add_groups(pci_dev->dev, pf_groups);
+		if (pci_drv->is_fv)
+			device_add_groups(pci_dev->dev, fv_groups);
 		return rc;
+	}
 	if (rc < 0) {
 		pci_dev->driver = NULL;
 		pm_runtime_put_sync(dev);




Add some proper error handling if device_add_groups() fails, and then do
the same thing to remove the sysfs files when the device is unbound from
the driver, and you should be good to go.

Or is this what you all are talking about already and I'm just totally
confused?

thanks,

greg k-h