linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
Cc: linux-doc@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Derek Kiernan <derek.kiernan@xilinx.com>,
	Dragan Cvetic <dragan.cvetic@xilinx.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jonathan Corbet <corbet@lwn.net>,
	Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH v6 1/5] misc: Add Synopsys DesignWare xData IP driver
Date: Tue, 23 Mar 2021 14:00:04 +0100	[thread overview]
Message-ID: <YFnmVEB86JcAENcN@kroah.com> (raw)
In-Reply-To: <724f5d30e3a9b86448df7e32fb5ed1e814416368.1613150798.git.gustavo.pimentel@synopsys.com>

On Fri, Feb 12, 2021 at 06:28:03PM +0100, Gustavo Pimentel wrote:
> +static const struct attribute_group xdata_attr_group = {
> +	.attrs = default_attrs,
> +	.name = DW_XDATA_DRIVER_NAME,
> +};

ATTRIBUTE_GROUPS()?

> +static int dw_xdata_pcie_probe(struct pci_dev *pdev,
> +			       const struct pci_device_id *pid)
> +{
> +	const struct dw_xdata_pcie_data *pdata = (void *)pid->driver_data;
> +	struct dw_xdata *dw;
> +	u64 addr;
> +	int err;
> +
> +	/* Enable PCI device */
> +	err = pcim_enable_device(pdev);
> +	if (err) {
> +		pci_err(pdev, "enabling device failed\n");
> +		return err;
> +	}
> +
> +	/* Mapping PCI BAR regions */
> +	err = pcim_iomap_regions(pdev, BIT(pdata->rg_bar), pci_name(pdev));
> +	if (err) {
> +		pci_err(pdev, "xData BAR I/O remapping failed\n");
> +		return err;
> +	}
> +
> +	pci_set_master(pdev);
> +
> +	/* Allocate memory */
> +	dw = devm_kzalloc(&pdev->dev, sizeof(*dw), GFP_KERNEL);
> +	if (!dw)
> +		return -ENOMEM;
> +
> +	/* Data structure initialization */
> +	mutex_init(&dw->mutex);
> +
> +	dw->rg_region.vaddr = pcim_iomap_table(pdev)[pdata->rg_bar];
> +	if (!dw->rg_region.vaddr)
> +		return -ENOMEM;
> +
> +	dw->rg_region.vaddr += pdata->rg_off;
> +	dw->rg_region.paddr = pdev->resource[pdata->rg_bar].start;
> +	dw->rg_region.paddr += pdata->rg_off;
> +	dw->rg_region.sz = pdata->rg_sz;
> +
> +	dw->max_wr_len = pcie_get_mps(pdev);
> +	dw->max_wr_len >>= 2;
> +
> +	dw->max_rd_len = pcie_get_readrq(pdev);
> +	dw->max_rd_len >>= 2;
> +
> +	dw->pdev = pdev;
> +
> +	writel(0x0, &(__dw_regs(dw)->RAM_addr));
> +	writel(0x0, &(__dw_regs(dw)->RAM_port));
> +
> +	addr = dw->rg_region.paddr + DW_XDATA_EP_MEM_OFFSET;
> +	writel(lower_32_bits(addr), &(__dw_regs(dw)->addr_lsb));
> +	writel(upper_32_bits(addr), &(__dw_regs(dw)->addr_msb));
> +	pci_dbg(pdev, "xData: target address = 0x%.16llx\n", addr);
> +
> +	pci_dbg(pdev, "xData: wr_len=%zu, rd_len=%zu\n",
> +		dw->max_wr_len * 4, dw->max_rd_len * 4);
> +
> +	/* Saving data structure reference */
> +	pci_set_drvdata(pdev, dw);
> +
> +	/* Sysfs */
> +	err = sysfs_create_group(&pdev->dev.kobj, &xdata_attr_group);

You just raced with userspace and lost :(

Have the driver core properly create/remove your sysfs files, set the
default groups pointer in your driver and all will be fine.

thanks,

greg k-h

  reply	other threads:[~2021-03-23 13:01 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-12 17:28 [PATCH v6 0/5] misc: Add " Gustavo Pimentel
2021-02-12 17:28 ` [PATCH v6 1/5] misc: " Gustavo Pimentel
2021-03-23 13:00   ` Greg Kroah-Hartman [this message]
2021-03-24  9:15     ` Gustavo Pimentel
2021-03-24  9:25       ` Greg Kroah-Hartman
2021-02-12 17:28 ` [PATCH v6 2/5] misc: Add Synopsys DesignWare xData IP driver to Makefile and Kconfig Gustavo Pimentel
2021-02-12 17:28 ` [PATCH v6 3/5] Documentation: misc-devices: Add Documentation for dw-xdata-pcie driver Gustavo Pimentel
2021-02-12 17:28 ` [PATCH v6 4/5] MAINTAINERS: Add Synopsys xData IP driver maintainer Gustavo Pimentel
2021-02-12 17:28 ` [PATCH v6 5/5] docs: ABI: Add sysfs documentation interface of dw-xdata-pcie driver Gustavo Pimentel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YFnmVEB86JcAENcN@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=Gustavo.Pimentel@synopsys.com \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=corbet@lwn.net \
    --cc=derek.kiernan@xilinx.com \
    --cc=dragan.cvetic@xilinx.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --subject='Re: [PATCH v6 1/5] misc: Add Synopsys DesignWare xData IP driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).