linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: bhelgaas@google.com, koba.ko@canonical.com,
	Russell Currey <ruscur@russell.cc>,
	Oliver O'Halloran <oohall@gmail.com>,
	Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>,
	Joerg Roedel <jroedel@suse.de>,
	Lu Baolu <baolu.lu@linux.intel.com>,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] PCI/AER: Disable AER when link is in L2/L3 ready, L2 and L3 state
Date: Thu, 27 Jan 2022 08:29:15 +0200	[thread overview]
Message-ID: <YfI7u5XSlNlx2w4I@lahna> (raw)
In-Reply-To: <CAAd53p7H3RApEHOzJYorD9VBnaPqYRkzE2g+8hAUXRToc=jbGg@mail.gmail.com>

Hi,

On Thu, Jan 27, 2022 at 10:21:35AM +0800, Kai-Heng Feng wrote:
> On Wed, Jan 26, 2022 at 7:03 PM Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
> >
> > Hi,
> >
> > On Wed, Jan 26, 2022 at 03:18:51PM +0800, Kai-Heng Feng wrote:
> > > Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
> > > hint") enables ACS, and some platforms lose its NVMe after resume from
> > > S3:
> > > [   50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
> > > [   50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
> > > [   50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
> > > [   50.947830] pcieport 0000:00:1b.0:   device [8086:06ac] error status/mask=00200000/00010000
> > > [   50.947831] pcieport 0000:00:1b.0:    [21] ACSViol                (First)
> > > [   50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
> > > [   50.947843] nvme nvme0: frozen state error detected, reset controller
> > >
> > > It happens right after ACS gets enabled during resume.
> >
> > Is this really because of the above commit of due the fact that AER
> > "service" never implemented the PM hooks in the first place ;-)
> 
> >From what I can understand, all services other than PME should be
> disabled during suspend.
> 
> For example, should we convert commit a697f072f5da8 ("PCI: Disable PTM
> during suspend to save power") to PM hooks in PTM service?

Yes, I think that's the right thing to do. I wonder how it was not using
the PM hooks in the first place.

  reply	other threads:[~2022-01-27  6:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-26  7:18 [PATCH 1/2] PCI/AER: Disable AER when link is in L2/L3 ready, L2 and L3 state Kai-Heng Feng
2022-01-26  7:18 ` [PATCH 2/2] PCI/DPC: Disable DPC " Kai-Heng Feng
2022-01-26 11:10   ` Mika Westerberg
2022-01-27  2:22     ` Kai-Heng Feng
2022-01-26 11:03 ` [PATCH 1/2] PCI/AER: Disable AER " Mika Westerberg
2022-01-27  2:21   ` Kai-Heng Feng
2022-01-27  6:29     ` Mika Westerberg [this message]
2022-01-27  6:35       ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YfI7u5XSlNlx2w4I@lahna \
    --to=mika.westerberg@linux.intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=jroedel@suse.de \
    --cc=kai.heng.feng@canonical.com \
    --cc=koba.ko@canonical.com \
    --cc=lalithambika.krishnakumar@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=oohall@gmail.com \
    --cc=ruscur@russell.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).