linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: "Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Alexey Malahov" <Alexey.Malahov@baikalelectronics.ru>,
	"Pavel Parkhomenko" <Pavel.Parkhomenko@baikalelectronics.ru>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Frank Li" <Frank.Li@nxp.com>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 02/16] dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings
Date: Mon, 28 Mar 2022 18:20:03 -0500	[thread overview]
Message-ID: <YkJCo1PrdKlHYt8D@robh.at.kernel.org> (raw)
In-Reply-To: <20220324013734.18234-3-Sergey.Semin@baikalelectronics.ru>

On Thu, Mar 24, 2022 at 04:37:20AM +0300, Serge Semin wrote:
> Baikal-T1 SoC is equipped with DWC PCIe v4.60a Root Port controller, which
> link can be trained to work on up to Gen.3 speed over up to x4 lanes. The
> controller is supposed to be fed up with four clock sources: DBI
> peripheral clock, AXI application Tx/Rx clocks and external PHY/core
> reference clock generating the 100MHz signal. In addition to that the
> platform provide a way to reset each part of the controller:
> sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and
> Hot/Power reset signal. The Root Port controller is equipped with multiple
> IRQ lines like MSI, system AER, PME, HP, Bandwidth change, Link
> equalization request and eDMA ones. The registers space is accessed over
> the DBI interface. There can be no more than four inbound or outbound iATU
> windows configured.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Rob, this DT-bindings most likely will fail the dt_bindings_check
> evaluations with the "'*' is not of type 'array'" errors for the same
> reason described in the previous patch. Let's discuss the problem there.
> ---
>  .../bindings/pci/baikal,bt1-pcie.yaml         | 148 ++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> new file mode 100644
> index 000000000000..f34438330a86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Baikal-T1 PCIe Root Port Controller
> +
> +maintainers:
> +  - Serge Semin <fancer.lancer@gmail.com>
> +
> +description: |
> +  Embedded into Baikal-T1 SoC Root Complex controller. It's based on the
> +  DWC RC PCIe v4.60a IP-core, which is configured to have just a single Root
> +  Port function and is capable of establishing the link up to Gen.3 speed
> +  on x4 lanes. It doesn't have embedded clock and reset control module, so
> +  the proper interface initialization is supposed to be performed by software.
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    contains:
> +      const: baikal,bt1-pcie
> +
> +  reg:
> +    description:
> +      DBI, DBI2 and at least 4KB outbound iATU-capable region are available.

outbound iATU-capable region? While configured with iATU, it's just 
config space from a binding standpoint.

It's a bit more precise to do this:

items:
  - description: DBI...
  - description: DBI2...
  - ...


> +    maxItems: 3

And then drop this.

> +
> +  reg-names:
> +    minItems: 3
> +    maxItems: 3
> +    items:
> +      enum: [ dbi, dbi2, config ]

To enforce the order:

items:
  - const: dbi
  - const: dbi2
  - const: config

> +
> +  interrupts:
> +    description:
> +      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
> +      request and eight Read/Write eDMA IRQ lines are available.
> +    maxItems: 14
> +
> +  interrupt-names:
> +    minItems: 14
> +    maxItems: 14
> +    items:
> +      oneOf:
> +        - pattern: '^dma[0-7]$'
> +        - enum: [ msi, aer, pme, hp, bw_mg, l_eq ]

Can't you define the order?

> +
> +  clocks:
> +    description:
> +      DBI (attached to the APB bus), AXI-bus master and slave interfaces
> +      are fed up by the dedicated application clocks. A common reference
> +      clock signal is supposed to be attached to the corresponding Ref-pad
> +      of the SoC. It will be redistributed amongst the controller core
> +      sub-modules (pipe, core, aux, etc).
> +    minItems: 4
> +    maxItems: 4
> +
> +  clock-names:
> +    minItems: 4
> +    maxItems: 4
> +    items:
> +      enum: [ dbi, mstr, slv, ref ]
> +
> +  resets:
> +    description:
> +      A comprehensive controller reset logic is supposed to be implemented
> +      by software, so almost all the possible application and core reset
> +      signals are exposed via the system CCU module.
> +    minItems: 9
> +    maxItems: 9
> +
> +  reset-names:
> +    minItems: 9
> +    maxItems: 9
> +    items:
> +      enum: [ mstr, slv, pwr, hot, phy, core, pipe, sticky, non-sticky ]

Again, define the order.

> +
> +  syscon:

Needs a vendor prefix.

> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the Baikal-T1 System Controller DT node. It's required to
> +      access some additional PM, Reset-related and LTSSM signals.
> +
> +  num-lanes:
> +    maximum: 4
> +
> +  max-link-speed:
> +    maximum: 3
> +

> +  num-ob-windows:
> +    const: 4
> +
> +  num-ib-windows:
> +    const: 4

These are deprecated. The driver probes for how many now.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    pcie@1f052000 {
> +      compatible = "baikal,bt1-pcie", "snps,dw-pcie-4.60a", "snps,dw-pcie";
> +      device_type = "pci";
> +      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
> +      reg-names = "dbi", "dbi2", "config";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
> +               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
> +      bus-range = <0x0 0xff>;
> +
> +      interrupts = <0 80 4>, <0 81 4>, <0 82 4>, <0 83 4>,
> +                   <0 84 4>, <0 85 4>, <0 86 4>, <0 87 4>,
> +                   <0 88 4>, <0 89 4>, <0 90 4>, <0 91 4>,
> +                   <0 92 4>, <0 93 4>;
> +      interrupt-names = "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6",
> +                        "dma7", "msi", "aer", "pme", "hp", "bw_mg", "l_eq";
> +
> +      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
> +      clock-names = "dbi", "mstr", "slv", "ref";
> +
> +      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
> +               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
> +               <&ccu_sys 9>;
> +      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
> +                    "sticky", "non-sticky";
> +
> +      reset-gpios = <&port0 0 1>;
> +
> +      num-lanes = <4>;
> +      max-link-speed = <3>;
> +    };
> +...
> -- 
> 2.35.1
> 
> 

  reply	other threads:[~2022-03-28 23:20 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24  1:37 [PATCH 00/16] PCI: dwc: Add dma-ranges/YAML-schema/Baikal-T1 support Serge Semin
2022-03-24  1:37 ` [PATCH 01/16] dt-bindings: PCI: dwc: Define generic and native DT bindings Serge Semin
2022-03-28 20:46   ` Rob Herring
2022-04-15 16:14     ` Serge Semin
2022-03-24  1:37 ` [PATCH 02/16] dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings Serge Semin
2022-03-28 23:20   ` Rob Herring [this message]
2022-04-15 20:22     ` Serge Semin
2022-03-24  1:37 ` [PATCH 03/16] PCI: dwc: Add more verbose link-up message Serge Semin
2022-03-28 23:31   ` Joe Perches
2022-04-16  8:01     ` Serge Semin
2022-03-29 14:47   ` Rob Herring
2022-04-17 10:10     ` Serge Semin
2022-03-24  1:37 ` [PATCH 04/16] PCI: dwc: Convert to using native IP-core versions representation Serge Semin
2022-03-29 15:00   ` Rob Herring
2022-04-17 14:42     ` Serge Semin
2022-03-24  1:37 ` [PATCH 05/16] PCI: dwc: Add IP-core version detection procedure Serge Semin
2022-03-29 15:08   ` Rob Herring
2022-04-17 15:13     ` Serge Semin
2022-03-24  1:37 ` [PATCH 06/16] PCI: dwc: Introduce Synopsys IP-core versions/types interface Serge Semin
2022-03-24  1:37 ` [PATCH 07/16] PCI: dwc: Add host de-initialization callback Serge Semin
2022-03-24  1:37 ` [PATCH 08/16] PCI: dwc: Drop inbound iATU types enumeration - dw_pcie_as_type Serge Semin
2022-03-29 15:16   ` Rob Herring
2022-03-24  1:37 ` [PATCH 09/16] PCI: dwc: Simplify in/outbound iATU setup methods Serge Semin
2022-03-29 15:28   ` Rob Herring
2022-04-17 20:08     ` Serge Semin
2022-03-24  1:37 ` [PATCH 10/16] PCI: dwc: Drop iATU regions enumeration - dw_pcie_region_type Serge Semin
2022-03-29 15:31   ` Rob Herring
2022-04-17 17:52     ` Serge Semin
2022-03-24  1:37 ` [PATCH 11/16] PCI: dwc: Add iATU regions size detection procedure Serge Semin
2022-03-24  1:37 ` [PATCH 12/16] PCI: dwc: Verify in/out regions against iATU constraints Serge Semin
2022-03-24  1:37 ` [PATCH 13/16] PCI: dwc: Check iATU in/outbound ranges setup methods status Serge Semin
2022-03-24  1:37 ` [PATCH 14/16] PCI: dwc: Introduce dma-ranges property support for RC-host Serge Semin
2022-03-24  1:37 ` [PATCH 15/16] PCI: dwc: Introduce generic platform clocks and resets sets Serge Semin
2022-03-24  1:37 ` [PATCH 16/16] PCI: dwc: Add Baikal-T1 PCIe controller support Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YkJCo1PrdKlHYt8D@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).