linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: okaya@codeaurora.org
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lukas Wunner <lukas@wunner.de>
Subject: Re: pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 65284 msec ago)
Date: Fri, 04 May 2018 07:37:40 +0100	[thread overview]
Message-ID: <aa72d3ba089c76449600c22b58a2cafe@codeaurora.org> (raw)
In-Reply-To: <20180504024527.GE15790@bhelgaas-glaptop.roam.corp.google.com>

On 2018-05-04 03:45, Bjorn Helgaas wrote:
> On Thu, May 03, 2018 at 10:49:24AM +0200, Paul Menzel wrote:
>> On 04/27/18 21:22, Bjorn Helgaas wrote:
>> > [+cc Lukas, Sinan]
>> 
>> > On Thu, Apr 26, 2018 at 12:17:53PM +0200, Paul Menzel wrote:
>> 
>> > > On the Lenovo X60t, during resume from ACPI suspend and during shutdown, the
>> > > message below is shown in the logs.
>> > >
>> > >      pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued
>> > > 65284 msec ago)
>> >
>> > This is an Intel root port:
>> >
>> >    00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>> >
>> > and probably has the CF118 erratum (see
>> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3461a068661c
>> > for details).  I bet if you changed "msecs" in pcie_wait_cmd() to 30000
>> > you'd see a 30 second delay during shutdown because we write a command to
>> > tell the port not to generate any more hotplug interrupts, and we wait for
>> > that command to complete, but the port never tells us it has completed.
>> >
>> > Lukas reported a similar issue in
>> > https://lkml.kernel.org/r/20180112104929.GA10599@wunner.de, which we sort
>> > of worked around by assuming that Thunderbolt controllers never support
>> > that "command complete" interrupt (see
>> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=493fb50e958c)
>> >
>> > Sinan mooted the idea of using a "no-wait" path of sending the "don't
>> > generate hotplug interrupts" command.  I think we should work on this
>> > idea a little more.  If we're shutting down the whole system, I can't
>> > believe there's much value in *anything* we do in the pciehp_remove()
>> > path.
>> >
>> > Maybe we should just get rid of pciehp_remove() (and probably
>> > pcie_port_remove_service() and the other service driver remove methods)
>> > completely.  That dates from when the service drivers could be modules that
>> > could be potentially unloaded, but unloading them hasn't been possible for
>> > years.
>> >
>> > As far as the resume path, my guess is that in pciehp_resume(), we
>> > write a command to enable interrupts, then it looks like we get a
>> > PCI_EXP_SLTSTA_DLLSC "Link Up" interrupt, and apparently we issue
>> > another command.  Not sure exactly what's going on here.
> 
>> Thank you for the quick reply and sorry for only being able to test it 
>> now.
>> Please find the relevant bits from the ACPI S3 suspend “action” below. 
>> The
>> full log is attached.
> 
> No problem.  I think we need to bite the bullet and just do a quirk
> for the Intel erratum.  I tried to avoid it by waiting for command
> completion lazily, but I think that ended up being unnecessarily
> clever and it didn't even solve the whole problem.
> 
> Can you try the patch below?  I think it should solve the problem
> you're seeing.
> 
> 
> commit ec48a1e0b91ce68903c8ea4dce659d4fdf17ad06
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date:   Thu May 3 18:39:38 2018 -0500
> 
>     PCI: pciehp: Add quirk for Intel Command Completed erratum
> 
>     The Intel CF118 erratum means the controller does not set the 
> Command
>     Completed bit unless writes to the Slot Command register change 
> "Control"
>     bits.  Command Completed is never set for writes that only change 
> software
>     notification "Enable" bits.  This results in timeouts like this:
> 
>       pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038
> (issued 65284 msec ago)
> 
>     When this erratum is present, avoid these timeouts by marking 
> commands
>     "completed" immediately unless they change the "Control" bits.
> 
>     Here's the text of the erratum from the Intel document:
> 
>       CF118        PCIe Slot Status Register Command Completed bit not 
> always
>                    updated on any configuration write to the Slot 
> Control
>                    Register
> 
>       Problem:     For PCIe root ports (devices 0 - 10) supporting 
> hot-plug,
>                    the Slot Status Register (offset AAh) Command 
> Completed
>                    (bit[4]) status is updated under the following 
> condition:
>                    IOH will set Command Completed bit after delivering 
> the new
>                    commands written in the Slot Controller register 
> (offset
>                    A8h) to VPP. The IOH detects new commands written in 
> Slot
>                    Control register by checking the change of value for 
> Power
>                    Controller Control (bit[10]), Power Indicator 
> Control
>                    (bits[9:8]), Attention Indicator Control 
> (bits[7:6]), or
>                    Electromechanical Interlock Control (bit[11]) 
> fields. Any
>                    other configuration writes to the Slot Control 
> register
>                    without changing the values of these fields will not 
> cause
>                    Command Completed bit to be set.
> 
>                    The PCIe Base Specification Revision 2.0 or later 
> describes
>                    the “Slot Control Register” in section 7.8.10, as 
> follows
>                    (Reference section 7.8.10, Slot Control Register, 
> Offset
>                    18h). In hot-plug capable Downstream Ports, a write 
> to the
>                    Slot Control register must cause a hot-plug command 
> to be
>                    generated (see Section 6.7.3.2 for details on 
> hot-plug
>                    commands). A write to the Slot Control register in a
>                    Downstream Port that is not hotplug capable must not 
> cause a
>                    hot-plug command to be executed.
> 
>                    The PCIe Spec intended that every write to the Slot 
> Control
>                    Register is a command and expected a command 
> complete status
>                    to abstract the VPP implementation specific nuances 
> from the
>                    OS software. IOH PCIe Slot Control Register 
> implementation
>                    is not fully conforming to the PCIe Specification in 
> this
>                    respect.
> 
>       Implication: Software checking on the Command Completed status 
> after
>                    writing to the Slot Control register may time out.
> 
>       Workaround:  Software can read the Slot Control register and 
> compare the
>                    existing and new values to determine if it should 
> check the
>                    Command Completed status after writing to the Slot 
> Control
>                    register.
> 
>     Link:
> http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html
>     Link:
> https://lkml.kernel.org/r/8770820b-85a0-172b-7230-3a44524e6c9f@molgen.mpg.de
>     Reported-by: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de>
>     Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> diff --git a/drivers/pci/hotplug/pciehp.h 
> b/drivers/pci/hotplug/pciehp.h
> index c27aab8e25d7..eefffff8e403 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -83,6 +83,7 @@ struct controller {
>  	struct timer_list poll_timer;
>  	unsigned long cmd_started;	/* jiffies */
>  	unsigned int cmd_busy:1;
> +	unsigned int cc_erratum:1;
>  	unsigned int link_active_reporting:1;
>  	unsigned int notification_enabled:1;
>  	unsigned int power_fault_detected:1;
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c 
> b/drivers/pci/hotplug/pciehp_hpc.c
> index 18a42f8f5dc5..aba67d16484a 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -10,7 +10,6 @@
>   * All rights reserved.
>   *
>   * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
> - *
>   */
> 
>  #include <linux/kernel.h>
> @@ -147,25 +146,27 @@ static void pcie_wait_cmd(struct controller 
> *ctrl)
>  	else
>  		rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout));
> 
> -	/*
> -	 * Controllers with errata like Intel CF118 don't generate
> -	 * completion notifications unless the power/indicator/interlock
> -	 * control bits are changed.  On such controllers, we'll emit this
> -	 * timeout message when we wait for completion of commands that
> -	 * don't change those bits, e.g., commands that merely enable
> -	 * interrupts.
> -	 */
>  	if (!rc)
>  		ctrl_info(ctrl, "Timeout on hotplug command %#06x (issued %u msec 
> ago)\n",
>  			  ctrl->slot_ctrl,
>  			  jiffies_to_msecs(jiffies - ctrl->cmd_started));
>  }
> 
> +/*
> + * The Intel CF118 erratum means the Command Completed bit is only set 
> if a
> + * Slot Control write changes PCI_EXP_SLTCTL_PCC, PCI_EXP_SLTCTL_PIC,
> + * PCI_EXP_SLTCTL_AIC, or PCI_EXP_SLTCTL_EIC.
> + */
> +#define CC_ERRATUM_MASK		(PCI_EXP_SLTCTL_PCC |	\
> +				 PCI_EXP_SLTCTL_PIC |	\
> +				 PCI_EXP_SLTCTL_AIC |	\
> +				 PCI_EXP_SLTCTL_EIC)
> +
>  static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
>  			      u16 mask, bool wait)
>  {
>  	struct pci_dev *pdev = ctrl_dev(ctrl);
> -	u16 slot_ctrl;
> +	u16 slot_ctrl_orig, slot_ctrl;
> 
>  	mutex_lock(&ctrl->ctrl_lock);
> 
> @@ -180,6 +181,7 @@ static void pcie_do_write_cmd(struct controller
> *ctrl, u16 cmd,
>  		goto out;
>  	}
> 
> +	slot_ctrl_orig = slot_ctrl;
>  	slot_ctrl &= ~mask;
>  	slot_ctrl |= (cmd & mask);
>  	ctrl->cmd_busy = 1;
> @@ -188,6 +190,10 @@ static void pcie_do_write_cmd(struct controller
> *ctrl, u16 cmd,
>  	ctrl->cmd_started = jiffies;
>  	ctrl->slot_ctrl = slot_ctrl;
> 
> +	if (ctrl->cc_erratum &&
> +	    (slot_ctrl_orig & CC_ERRATUM_MASK) == (slot_ctrl & 
> CC_ERRATUM_MASK))
> +		ctrl->cmd_busy = 0;
> +
>  	/*
>  	 * Optionally wait for the hardware to be ready for a new command,
>  	 * indicating completion of the above issued command.
> @@ -840,6 +846,10 @@ struct controller *pcie_init(struct pcie_device 
> *dev)
>  	if (pdev->is_thunderbolt)
>  		slot_cap |= PCI_EXP_SLTCAP_NCCS;
> 
> +	/* Assume all Intel controllers have erratum CF118 */
> +	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
> +		ctrl->cc_erratum = 1;
> +

Can we build a table like quirks.c?

Qdf2400 root ports have the same problem. I will do a follow up patch 
once this finds its way in.

>  	ctrl->slot_cap = slot_cap;
>  	mutex_init(&ctrl->ctrl_lock);
>  	init_waitqueue_head(&ctrl->queue);
> @@ -861,7 +871,7 @@ struct controller *pcie_init(struct pcie_device 
> *dev)
>  		PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
>  		PCI_EXP_SLTSTA_DLLSC);
> 
> -	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c
> PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c\n",
> +	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c
> PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c%s LLActRep%c\n",
>  		(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
>  		FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
>  		FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
> @@ -872,6 +882,7 @@ struct controller *pcie_init(struct pcie_device 
> *dev)
>  		FLAG(slot_cap, PCI_EXP_SLTCAP_HPS),
>  		FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
>  		FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
> +		ctrl->cc_erratum? " (with CC erratum)" : "",
>  		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC));
> 
>  	if (pcie_init_slot(ctrl))

  reply	other threads:[~2018-05-04  6:37 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-26 10:17 Paul Menzel
2018-04-27 19:22 ` Bjorn Helgaas
2018-04-27 19:34   ` Sinan Kaya
2018-04-27 21:12     ` Bjorn Helgaas
2018-04-28  0:56       ` Dave Young
2018-04-28  1:18         ` Dave Young
2018-04-28 13:03           ` okaya
2018-04-30 20:48             ` Sinan Kaya
2018-04-30 21:17               ` Bjorn Helgaas
2018-04-30 21:27                 ` Sinan Kaya
2018-04-30 21:38                   ` Lukas Wunner
2018-05-01 12:38                   ` Sinan Kaya
2018-05-01 12:59                     ` Marc Zyngier
2018-05-01 13:25                       ` Bjorn Helgaas
2018-05-01 16:31                         ` Marc Zyngier
2018-05-01 22:32                           ` Eric W. Biederman
2018-05-03  8:49   ` Paul Menzel
2018-05-04  2:45     ` Bjorn Helgaas
2018-05-04  6:37       ` okaya [this message]
2018-05-04 13:33         ` Bjorn Helgaas
2018-05-04 14:24           ` okaya
2018-05-06  9:35           ` Paul Menzel
2018-05-07 21:33           ` Bjorn Helgaas
2018-05-08  6:59             ` Paul Menzel
2018-05-08 12:34               ` Bjorn Helgaas
2018-05-08 13:22                 ` Paul Menzel
2018-05-09 11:41   ` Lukas Wunner
2018-05-09 12:57     ` Bjorn Helgaas
2018-05-09 13:16       ` Lukas Wunner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aa72d3ba089c76449600c22b58a2cafe@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=pmenzel+linux-pci@molgen.mpg.de \
    --subject='Re: pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 65284 msec ago)' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).