linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <andrew.murray@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>, <linux-omap@vger.kernel.org>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] PCI: dwc: pci-dra7xx: Fix MSI IRQ handling
Date: Fri, 21 Feb 2020 17:13:04 +0530	[thread overview]
Message-ID: <abdd33fa-be45-9d2e-bf27-91e8c02be6ae@ti.com> (raw)
In-Reply-To: <20200124163650.4457-1-vigneshr@ti.com>


On 24/01/20 10:06 pm, Vignesh Raghavendra wrote:
> Due an issue with PCIe wrapper around DWC PCIe IP on dra7xx, driver
> needs to ensure that there are no pending MSI IRQ vector set (i.e
> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting IRQ handler.
> Else, the dra7xx PCIe wrapper will not register new MSI IRQs even though
> PCIE_MSI_INTR0_STATUS shows IRQs are pending.
> 
> Therefore its no longer possible to use default IRQ handler provided by
> DWC library. So, add irqchip implementation inside pci-dra7xx.c and
> install new MSI IRQ handler to handle above errata.
> 
> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
> 8260 used to throw following error and stall during ping/iperf3 tests.
> 
> [   97.776310] iwlwifi 0000:01:00.0: Queue 9 stuck for 2500 ms.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
> Based on discussions here: https://www.spinics.net/lists/linux-pci/msg70462.html

This also fixed an issue I observed in NVMe card.

FWIW:
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
> 
>  drivers/pci/controller/dwc/pci-dra7xx.c | 227 ++++++++++++++++++++----
>  1 file changed, 189 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
> index 9bf7fa99b103..07f242539ce9 100644
> --- a/drivers/pci/controller/dwc/pci-dra7xx.c
> +++ b/drivers/pci/controller/dwc/pci-dra7xx.c
> @@ -215,10 +215,6 @@ static int dra7xx_pcie_host_init(struct pcie_port *pp)
>  	return 0;
>  }
>  
> -static const struct dw_pcie_host_ops dra7xx_pcie_host_ops = {
> -	.host_init = dra7xx_pcie_host_init,
> -};
> -
>  static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
>  				irq_hw_number_t hwirq)
>  {
> @@ -233,43 +229,69 @@ static const struct irq_domain_ops intx_domain_ops = {
>  	.xlate = pci_irqd_intx_xlate,
>  };
>  
> -static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
> +static int dra7xx_pcie_handle_msi_irq(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -	struct device *dev = pci->dev;
> -	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
> -	struct device_node *node = dev->of_node;
> -	struct device_node *pcie_intc_node =  of_get_next_child(node, NULL);
> -
> -	if (!pcie_intc_node) {
> -		dev_err(dev, "No PCIe Intc node found\n");
> -		return -ENODEV;
> -	}
> -
> -	dra7xx->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
> -						   &intx_domain_ops, pp);
> -	of_node_put(pcie_intc_node);
> -	if (!dra7xx->irq_domain) {
> -		dev_err(dev, "Failed to get a INTx IRQ domain\n");
> -		return -ENODEV;
> +	int i, pos, irq;
> +	unsigned long val;
> +	u32 status, num_ctrls;
> +	int ret = 0;
> +
> +	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> +
> +	for (i = 0; i < num_ctrls; i++) {
> +		status = dw_pcie_readl_dbi(pci, PCIE_MSI_INTR0_STATUS +
> +					   (i * MSI_REG_CTRL_BLOCK_SIZE));
> +		if (!status)
> +			continue;
> +
> +		ret = 1;
> +		val = status;
> +		pos = 0;
> +		while ((pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL,
> +					    pos)) != MAX_MSI_IRQS_PER_CTRL) {
> +			irq = irq_find_mapping(pp->irq_domain,
> +					       (i * MAX_MSI_IRQS_PER_CTRL) +
> +					       pos);
> +			generic_handle_irq(irq);
> +			pos++;
> +		}
>  	}
>  
> -	return 0;
> +	return ret;
>  }
>  
> -static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
> +static void dra7xx_pcie_msi_irq_handler(struct irq_desc *desc)
>  {
> -	struct dra7xx_pcie *dra7xx = arg;
> -	struct dw_pcie *pci = dra7xx->pci;
> -	struct pcie_port *pp = &pci->pp;
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct dra7xx_pcie *dra7xx;
> +	struct dw_pcie *pci;
> +	struct pcie_port *pp;
>  	unsigned long reg;
>  	u32 virq, bit;
> +	int count = 0;
> +
> +	chained_irq_enter(chip, desc);
> +
> +	pp = irq_desc_get_handler_data(desc);
> +	pci = to_dw_pcie_from_pp(pp);
> +	dra7xx = to_dra7xx_pcie(pci);
>  
>  	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
> +	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>  
>  	switch (reg) {
>  	case MSI:
> -		dw_handle_msi_irq(pp);
> +		/**
> +		 * Need to make sure all MSI status bits read 0 before
> +		 * exiting. Else, new MSI IRQs are not registered by the
> +		 * wrapper. Have an upperbound for the loop and exit the
> +		 * IRQ in case of IRQ flood to avoid locking up system
> +		 * in interrupt context.
> +		 */
> +		while (dra7xx_pcie_handle_msi_irq(pp) && count < 1000)
> +			count++;
> +
>  		break;
>  	case INTA:
>  	case INTB:
> @@ -283,9 +305,7 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
>  		break;
>  	}
>  
> -	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
> -
> -	return IRQ_HANDLED;
> +	chained_irq_exit(chip, desc);
>  }
>  
>  static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
> @@ -347,6 +367,145 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
>  	return IRQ_HANDLED;
>  }
>  
> +static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct device *dev = pci->dev;
> +	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
> +	struct device_node *node = dev->of_node;
> +	struct device_node *pcie_intc_node =  of_get_next_child(node, NULL);
> +
> +	if (!pcie_intc_node) {
> +		dev_err(dev, "No PCIe Intc node found\n");
> +		return -ENODEV;
> +	}
> +
> +	irq_set_chained_handler_and_data(pp->irq, dra7xx_pcie_msi_irq_handler,
> +					 pp);
> +	dra7xx->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
> +						   &intx_domain_ops, pp);
> +	of_node_put(pcie_intc_node);
> +	if (!dra7xx->irq_domain) {
> +		dev_err(dev, "Failed to get a INTx IRQ domain\n");
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static void dra7xx_pcie_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
> +{
> +	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	u64 msi_target;
> +
> +	msi_target = (u64)pp->msi_data;
> +
> +	msg->address_lo = lower_32_bits(msi_target);
> +	msg->address_hi = upper_32_bits(msi_target);
> +
> +	msg->data = d->hwirq;
> +
> +	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
> +		(int)d->hwirq, msg->address_hi, msg->address_lo);
> +}
> +
> +static int dra7xx_pcie_msi_set_affinity(struct irq_data *d,
> +					const struct cpumask *mask,
> +					bool force)
> +{
> +	return -EINVAL;
> +}
> +
> +static void dra7xx_pcie_bottom_mask(struct irq_data *d)
> +{
> +	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	unsigned int res, bit, ctrl;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&pp->lock, flags);
> +
> +	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
> +	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
> +	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
> +
> +	pp->irq_mask[ctrl] |= BIT(bit);
> +	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res,
> +			   pp->irq_mask[ctrl]);
> +
> +	raw_spin_unlock_irqrestore(&pp->lock, flags);
> +}
> +
> +static void dra7xx_pcie_bottom_unmask(struct irq_data *d)
> +{
> +	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	unsigned int res, bit, ctrl;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&pp->lock, flags);
> +
> +	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
> +	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
> +	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
> +
> +	pp->irq_mask[ctrl] &= ~BIT(bit);
> +	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + res,
> +			   pp->irq_mask[ctrl]);
> +
> +	raw_spin_unlock_irqrestore(&pp->lock, flags);
> +}
> +
> +static void dra7xx_pcie_bottom_ack(struct irq_data *d)
> +{
> +	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	unsigned int res, bit, ctrl;
> +
> +	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
> +	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
> +	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
> +
> +	dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_STATUS + res, BIT(bit));
> +}
> +
> +static struct irq_chip dra7xx_pci_msi_bottom_irq_chip = {
> +	.name = "DRA7XX-PCI-MSI",
> +	.irq_ack = dra7xx_pcie_bottom_ack,
> +	.irq_compose_msi_msg = dra7xx_pcie_setup_msi_msg,
> +	.irq_set_affinity = dra7xx_pcie_msi_set_affinity,
> +	.irq_mask = dra7xx_pcie_bottom_mask,
> +	.irq_unmask = dra7xx_pcie_bottom_unmask,
> +};
> +
> +static int dra7xx_pcie_msi_host_init(struct pcie_port *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	u32 ctrl, num_ctrls;
> +
> +	pp->msi_irq_chip = &dra7xx_pci_msi_bottom_irq_chip;
> +
> +	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> +	/* Initialize IRQ Status array */
> +	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> +		pp->irq_mask[ctrl] = ~0;
> +		dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK +
> +				    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +				    pp->irq_mask[ctrl]);
> +		dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_ENABLE +
> +				    (ctrl * MSI_REG_CTRL_BLOCK_SIZE),
> +				    ~0);
> +	}
> +
> +	return dw_pcie_allocate_domains(pp);
> +}
> +
> +static const struct dw_pcie_host_ops dra7xx_pcie_host_ops = {
> +	.host_init = dra7xx_pcie_host_init,
> +	.msi_host_init = dra7xx_pcie_msi_host_init,
> +};
> +
>  static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> @@ -467,14 +626,6 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
>  		return pp->irq;
>  	}
>  
> -	ret = devm_request_irq(dev, pp->irq, dra7xx_pcie_msi_irq_handler,
> -			       IRQF_SHARED | IRQF_NO_THREAD,
> -			       "dra7-pcie-msi",	dra7xx);
> -	if (ret) {
> -		dev_err(dev, "failed to request irq\n");
> -		return ret;
> -	}
> -
>  	ret = dra7xx_pcie_init_irq_domain(pp);
>  	if (ret < 0)
>  		return ret;
> 

  reply	other threads:[~2020-02-21 11:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-24 16:36 [PATCH] PCI: dwc: pci-dra7xx: Fix MSI IRQ handling Vignesh Raghavendra
2020-02-21 11:43 ` Kishon Vijay Abraham I [this message]
2020-03-24  9:31 ` Vignesh Raghavendra
2020-03-24 15:05 ` Lorenzo Pieralisi
2020-03-26 15:28   ` Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=abdd33fa-be45-9d2e-bf27-91e8c02be6ae@ti.com \
    --to=kishon@ti.com \
    --cc=andrew.murray@arm.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).