From: Hans de Goede <hdegoede@redhat.com>
To: Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb <linux-usb@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org
Subject: 5.10 regression, many XHCI swiotlb buffer is full / DMAR: Device bounce map failed errors on thunderbolt connected XHCI controller
Date: Tue, 10 Nov 2020 12:36:47 +0100 [thread overview]
Message-ID: <b046dd04-ac4f-3c69-0602-af810fb1b365@redhat.com> (raw)
Hi All,
Not sure if this is a XHCI driver problem at all, but I needed to start
somewhere with reporting this so I went with:
scripts/get_maintainer.pl -f drivers/usb/host/xhci-pci.c
And added a Cc: linux-pci@vger.kernel.org as bonus.
I'm seeing the following errors and very slow network performance with
the USB NIC in a Lenovo Thunderbolt gen 2 dock.
Note that the USB NIC is connected to the XHCI controller which is
embedded inside the dock and is connected over thunderbolt!
So the errors are:
[ 1148.744205] swiotlb_tbl_map_single: 6 callbacks suppressed
[ 1148.744210] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.744218] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@1411c0000 dir 1 --- failed
[ 1148.744226] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.744368] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.744375] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@10aabc000 dir 1 --- failed
[ 1148.744381] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.745141] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.745148] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@1411c0000 dir 1 --- failed
[ 1148.745155] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.951282] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.951388] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@140988000 dir 1 --- failed
[ 1148.951420] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.013342] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.013357] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 1d2a@1411c0000 dir 1 --- failed
[ 1151.013373] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.018660] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 18 (slots)
[ 1151.018696] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@1411c0000 dir 1 --- failed
[ 1151.018711] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.223022] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.223102] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.223133] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.228810] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.228870] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.228898] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.234792] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.234852] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.234882] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
etc.
This happens as soon as I generate any serious amount of outgoing network traffic. E.g. rsyncing files
to another machine.
Regards,
Hans
next reply other threads:[~2020-11-10 11:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-10 11:36 Hans de Goede [this message]
2020-11-18 21:43 ` 5.10 regression, many XHCI swiotlb buffer is full / DMAR: Device bounce map failed errors on thunderbolt connected XHCI controller Hans de Goede
2020-11-23 14:49 ` Hans de Goede
2020-11-24 10:27 ` Christoph Hellwig
2020-11-24 10:31 ` Hans de Goede
2020-11-24 12:17 ` Mathias Nyman
2020-11-27 11:41 ` Hans de Goede
2020-11-27 12:32 ` 5.10 regression caused by: "uas: fix sdev->host->dma_dev": " Hans de Goede
2020-11-27 16:19 ` Christoph Hellwig
2020-11-27 18:12 ` Hans de Goede
2020-11-28 1:25 ` Tom Yan
2020-11-28 10:43 ` Hans de Goede
2020-11-28 15:48 ` [PATCH 1/2] uas: revert from scsi_add_host_with_dma() to scsi_add_host() Tom Yan
2020-11-28 15:48 ` [PATCH 2/2] usb-storage: " Tom Yan
2020-11-30 9:50 ` Hans de Goede
2020-11-30 12:58 ` Tom Yan
2020-11-30 13:23 ` Hans de Goede
2020-11-30 13:30 ` Greg KH
2020-11-30 13:36 ` Hans de Goede
2020-11-30 13:53 ` Greg KH
2020-11-30 13:55 ` Hans de Goede
2020-12-04 15:02 ` Greg KH
2020-11-30 17:20 ` Alan Stern
2020-11-30 17:24 ` Christoph Hellwig
2020-11-30 18:18 ` Hans de Goede
2020-11-30 18:57 ` Tom Yan
2020-11-30 19:01 ` Tom Yan
2020-11-30 20:36 ` Alan Stern
2020-11-30 14:39 ` Tom Yan
2020-11-30 9:48 ` [PATCH 1/2] uas: " Hans de Goede
2020-11-30 19:30 ` Tom Yan
2020-12-01 11:09 ` Hans de Goede
2020-11-28 17:15 ` 5.10 regression caused by: "uas: fix sdev->host->dma_dev": many XHCI swiotlb buffer is full / DMAR: Device bounce map failed errors on thunderbolt connected XHCI controller Christoph Hellwig
2020-11-30 8:43 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b046dd04-ac4f-3c69-0602-af810fb1b365@redhat.com \
--to=hdegoede@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).