[PATCH v6 0/4] PCI/ASPM: Add sysfs attributes for controlling ASPM

[PATCH v6 0/4] PCI/ASPM: Add sysfs attributes for controlling ASPM

[Heiner Kallweit]

Background of this extension is a problem with the r8169 network driver.
Several combinations of board chipsets and network chip versions have
problems if ASPM is enabled, therefore we have to disable ASPM per
default. However especially on notebooks ASPM can provide significant
power-saving, therefore we want to give users the option to enable
ASPM. With the new sysfs attributes users can control which ASPM
link-states are disabled.

Note: Series depends on series "PCI: Make pcie_downstream_port()
available outside of access.c" from Mika Westerberg that is still
sitting in the PCI inbox. 
Alternatively I could prepare a version w/o this dependency, but
then Mika's series would need to be changed.

v2:
- use a dedicated sysfs attribute per link state
- allow separate control of ASPM and PCI PM L1 sub-states

v3:
- patch 3: statically allocate the attribute group
- patch 3: replace snprintf with printf
- add patch 4

v4:
- patch 3: add call to sysfs_update_group because is_visible callback
           returns false always at file creation time
- patch 3: simplify code a little

v5:
- rebased to latest pci/next

v6:
- patch 3: consider several review comments from Bjorn
- patch 4: add discussion link to commit message

Heiner Kallweit (4):
  PCI/ASPM: Add L1 PM Substate support to pci_disable_link_state
  PCI/ASPM: Allow to re-enable Clock PM
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI/ASPM: Remove Kconfig option PCIEASPM_DEBUG and related code

 Documentation/ABI/testing/sysfs-bus-pci |  14 ++
 drivers/pci/pci-sysfs.c                 |  10 +-
 drivers/pci/pci.h                       |  12 +-
 drivers/pci/pcie/Kconfig                |   7 -
 drivers/pci/pcie/aspm.c                 | 246 +++++++++++++++++-------
 include/linux/pci.h                     |  10 +-
 6 files changed, 206 insertions(+), 93 deletions(-)

-- 
2.23.0

[PATCH v6 1/4] PCI/ASPM: Add L1 PM Substate support to pci_disable_link_state

[Heiner Kallweit]

Add support for disabling states L1.1 and L1.2 to
pci_disable_link_state(). Allow separate control of
ASPM and PCI PM L1 sub-states.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- allow separate control of ASPM and PCI PM L1 sub-states
---
 drivers/pci/pcie/aspm.c | 11 ++++++++++-
 include/linux/pci.h     | 10 +++++++---
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 652ef23bb..ed463339e 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1094,7 +1094,16 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
 	if (state & PCIE_LINK_STATE_L0S)
 		link->aspm_disable |= ASPM_STATE_L0S;
 	if (state & PCIE_LINK_STATE_L1)
-		link->aspm_disable |= ASPM_STATE_L1;
+		/* sub-states require L1 */
+		link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
+	if (state & PCIE_LINK_STATE_L1_1)
+		link->aspm_disable |= ASPM_STATE_L1_1;
+	if (state & PCIE_LINK_STATE_L1_2)
+		link->aspm_disable |= ASPM_STATE_L1_2;
+	if (state & PCIE_LINK_STATE_L1_1_PCIPM)
+		link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
+	if (state & PCIE_LINK_STATE_L1_2_PCIPM)
+		link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
 
 	if (state & PCIE_LINK_STATE_CLKPM) {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f9088c89a..9dc5bee14 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1544,9 +1544,13 @@ extern bool pcie_ports_native;
 #define pcie_ports_native	false
 #endif
 
-#define PCIE_LINK_STATE_L0S	1
-#define PCIE_LINK_STATE_L1	2
-#define PCIE_LINK_STATE_CLKPM	4
+#define PCIE_LINK_STATE_L0S		BIT(0)
+#define PCIE_LINK_STATE_L1		BIT(1)
+#define PCIE_LINK_STATE_CLKPM		BIT(2)
+#define PCIE_LINK_STATE_L1_1		BIT(3)
+#define PCIE_LINK_STATE_L1_2		BIT(4)
+#define PCIE_LINK_STATE_L1_1_PCIPM	BIT(5)
+#define PCIE_LINK_STATE_L1_2_PCIPM	BIT(6)
 
 #ifdef CONFIG_PCIEASPM
 int pci_disable_link_state(struct pci_dev *pdev, int state);
-- 
2.23.0

[PATCH v6 2/4] PCI/ASPM: Allow to re-enable Clock PM

[Heiner Kallweit]

So far Clock PM can't be re-enabled once it has been disabled with
a call to pci_disable_link_state(). Reason is that clkpm_capable
is reset. Change this by adding a clkpm_disable field similar to
aspm_disable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/pci/pcie/aspm.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index ed463339e..574f822bf 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -64,6 +64,7 @@ struct pcie_link_state {
 	u32 clkpm_capable:1;		/* Clock PM capable? */
 	u32 clkpm_enabled:1;		/* Current Clock PM state */
 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
+	u32 clkpm_disable:1;		/* Clock PM disabled */
 
 	/* Exit latencies */
 	struct aspm_latency latency_up;	/* Upstream direction exit latency */
@@ -161,8 +162,11 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
 
 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
 {
-	/* Don't enable Clock PM if the link is not Clock PM capable */
-	if (!link->clkpm_capable)
+	/*
+	 * Don't enable Clock PM if the link is not Clock PM capable
+	 * or Clock PM is disabled
+	 */
+	if (!link->clkpm_capable || link->clkpm_disable)
 		enable = 0;
 	/* Need nothing if the specified equals to current state */
 	if (link->clkpm_enabled == enable)
@@ -192,7 +196,8 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
 	}
 	link->clkpm_enabled = enabled;
 	link->clkpm_default = enabled;
-	link->clkpm_capable = (blacklist) ? 0 : capable;
+	link->clkpm_capable = capable;
+	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
 static bool pcie_retrain_link(struct pcie_link_state *link)
@@ -1106,10 +1111,9 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
 		link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
 
-	if (state & PCIE_LINK_STATE_CLKPM) {
-		link->clkpm_capable = 0;
-		pcie_set_clkpm(link, 0);
-	}
+	if (state & PCIE_LINK_STATE_CLKPM)
+		link->clkpm_disable = 1;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
 	mutex_unlock(&aspm_lock);
 	if (sem)
 		up_read(&pci_bus_sem);
-- 
2.23.0

[PATCH v6 3/4] PCI/ASPM: Add sysfs attributes for controlling ASPM link states

[Heiner Kallweit]

Background of this extension is a problem with the r8169 network driver.
Several combinations of board chipsets and network chip versions have
problems if ASPM is enabled, therefore we have to disable ASPM per default.
However especially on notebooks ASPM can provide significant power-saving,
therefore we want to give users the option to enable ASPM. With the new
sysfs attributes users can control which ASPM link-states are
enabled/disabled.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- use a dedicated sysfs attribute per link state
- allow separate control of ASPM and PCI PM L1 sub-states
v3:
- statically allocate the attribute group
- replace snprintf with printf
- base on top of "PCI: Make pcie_downstream_port() available outside of access.c"
v4:
- add call to sysfs_update_group because is_visible callback returns false
  always at file creation time
- simplify code a little
v5:
- rebased to latest pci/next
v6:
- fix style of added documentation and extend it
- don't use term "parent" and rename function to pcie_aspm_get_link
- rename pcie_check_valid_aspm_endpoint to pcie_is_aspm_dev
- enable the sysfs files also selected other port types
- avoid usage of !!
---
 Documentation/ABI/testing/sysfs-bus-pci |  14 ++
 drivers/pci/pci-sysfs.c                 |   7 +
 drivers/pci/pci.h                       |   4 +
 drivers/pci/pcie/aspm.c                 | 194 ++++++++++++++++++++++++
 4 files changed, 219 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 8bfee557e..9aabe8bbf 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -347,3 +347,17 @@ Description:
 		If the device has any Peer-to-Peer memory registered, this
 	        file contains a '1' if the memory has been published for
 		use outside the driver that owns the device.
+
+What:		/sys/bus/pci/devices/.../aspm/aspm_l0s
+		/sys/bus/pci/devices/.../aspm/aspm_l1
+		/sys/bus/pci/devices/.../aspm/aspm_l1_1
+		/sys/bus/pci/devices/.../aspm/aspm_l1_2
+		/sys/bus/pci/devices/.../aspm/aspm_l1_1_pcipm
+		/sys/bus/pci/devices/.../aspm/aspm_l1_2_pcipm
+		/sys/bus/pci/devices/.../aspm/aspm_clkpm
+Date:		September 2019
+Contact:	Heiner Kallweit <hkallweit1@gmail.com>
+Description:	If ASPM is supported for an endpoint, then these files
+		can be used to disable or enable the individual
+		power management states. Write y/1/on to enable,
+		n/0/off to disable.
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 793412954..26e36b0d0 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1331,6 +1331,10 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 
 	pcie_vpd_create_sysfs_dev_files(dev);
 	pcie_aspm_create_sysfs_dev_files(dev);
+#ifdef CONFIG_PCIEASPM
+	/* update visibility of attributes in this group */
+	sysfs_update_group(&dev->dev.kobj, &aspm_ctrl_attr_group);
+#endif
 
 	if (dev->reset_fn) {
 		retval = device_create_file(&dev->dev, &dev_attr_reset);
@@ -1587,6 +1591,9 @@ static const struct attribute_group *pci_dev_attr_groups[] = {
 	&pcie_dev_attr_group,
 #ifdef CONFIG_PCIEAER
 	&aer_stats_attr_group,
+#endif
+#ifdef CONFIG_PCIEASPM
+	&aspm_ctrl_attr_group,
 #endif
 	NULL,
 };
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3f6947ee3..b2cd21e8c 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -667,4 +667,8 @@ static inline int pci_acpi_program_hp_params(struct pci_dev *dev)
 }
 #endif
 
+#ifdef CONFIG_PCIEASPM
+extern const struct attribute_group aspm_ctrl_attr_group;
+#endif
+
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 574f822bf..58c0b069d 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1182,6 +1182,18 @@ static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
 	NULL, 0644);
 
+static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
+{
+	struct pci_dev *upstream;
+
+	if (pcie_downstream_port(pdev))
+		upstream = pdev;
+	else
+		upstream = pci_upstream_bridge(pdev);
+
+	return upstream ? upstream->link_state : NULL;
+}
+
 /**
  * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
  * @pdev: Target device.
@@ -1307,6 +1319,188 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
 }
 #endif
 
+static bool pcie_is_aspm_dev(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link;
+
+	if (!pci_is_pcie(pdev))
+		return false;
+
+	switch (pci_pcie_type(pdev)) {
+	case PCI_EXP_TYPE_ENDPOINT:
+	case PCI_EXP_TYPE_LEG_END:
+	case PCI_EXP_TYPE_UPSTREAM:
+	case PCI_EXP_TYPE_PCI_BRIDGE:
+	case PCI_EXP_TYPE_PCIE_BRIDGE:
+		link = pcie_aspm_get_link(pdev);
+		return link && link->aspm_capable;
+	default:
+		return false;
+	}
+}
+
+static ssize_t aspm_attr_show_common(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf, int state)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link;
+	bool enabled;
+
+	link = pcie_aspm_get_link(pdev);
+	if (!link)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&aspm_lock);
+	enabled = link->aspm_enabled & state;
+	mutex_unlock(&aspm_lock);
+
+	return sprintf(buf, "%d\n", enabled ? 1 : 0);
+}
+
+static ssize_t aspm_attr_store_common(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t len, int state)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link;
+	bool state_enable;
+
+	if (aspm_disabled)
+		return -EPERM;
+
+	link = pcie_aspm_get_link(pdev);
+	if (!link)
+		return -EOPNOTSUPP;
+
+	if (!(link->aspm_capable & state))
+		return -EOPNOTSUPP;
+
+	if (strtobool(buf, &state_enable) < 0)
+		return -EINVAL;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+
+	if (state_enable) {
+		link->aspm_disable &= ~state;
+		/* need to enable L1 for sub-states */
+		if (state & ASPM_STATE_L1SS)
+			link->aspm_disable &= ~ASPM_STATE_L1;
+	} else {
+		link->aspm_disable |= state;
+	}
+
+	pcie_config_aspm_link(link, policy_to_aspm_state(link));
+
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+
+	return len;
+}
+
+#define ASPM_ATTR(_f, _s)						\
+static ssize_t aspm_##_f##_show(struct device *dev,			\
+			struct device_attribute *attr, char *buf)	\
+{ return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); }	\
+									\
+static ssize_t aspm_##_f##_store(struct device *dev,			\
+				 struct device_attribute *attr,		\
+				 const char *buf, size_t len)		\
+{ return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
+
+ASPM_ATTR(l0s, L0S)
+ASPM_ATTR(l1, L1)
+ASPM_ATTR(l1_1, L1_1)
+ASPM_ATTR(l1_2, L1_2)
+ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
+ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
+
+static ssize_t aspm_clkpm_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link;
+	int val;
+
+	link = pcie_aspm_get_link(pdev);
+	if (!link)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&aspm_lock);
+	val = link->clkpm_enabled;
+	mutex_unlock(&aspm_lock);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t aspm_clkpm_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pcie_link_state *link;
+	bool state_enable;
+
+	if (aspm_disabled)
+		return -EPERM;
+
+	link = pcie_aspm_get_link(pdev);
+	if (!link)
+		return -EOPNOTSUPP;
+
+	if (!link->clkpm_capable)
+		return -EOPNOTSUPP;
+
+	if (strtobool(buf, &state_enable) < 0)
+		return -EINVAL;
+
+	down_read(&pci_bus_sem);
+	mutex_lock(&aspm_lock);
+
+	link->clkpm_disable = !state_enable;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
+
+	mutex_unlock(&aspm_lock);
+	up_read(&pci_bus_sem);
+
+	return len;
+}
+
+static DEVICE_ATTR_RW(aspm_l0s);
+static DEVICE_ATTR_RW(aspm_l1);
+static DEVICE_ATTR_RW(aspm_l1_1);
+static DEVICE_ATTR_RW(aspm_l1_2);
+static DEVICE_ATTR_RW(aspm_l1_1_pcipm);
+static DEVICE_ATTR_RW(aspm_l1_2_pcipm);
+static DEVICE_ATTR_RW(aspm_clkpm);
+
+static struct attribute *aspm_ctrl_attrs[] = {
+	&dev_attr_aspm_l0s.attr,
+	&dev_attr_aspm_l1.attr,
+	&dev_attr_aspm_l1_1.attr,
+	&dev_attr_aspm_l1_2.attr,
+	&dev_attr_aspm_l1_1_pcipm.attr,
+	&dev_attr_aspm_l1_2_pcipm.attr,
+	&dev_attr_aspm_clkpm.attr,
+	NULL
+};
+
+static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
+					   struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return pcie_is_aspm_dev(pdev) ? a->mode : 0;
+}
+
+const struct attribute_group aspm_ctrl_attr_group = {
+	.name = "aspm",
+	.attrs = aspm_ctrl_attrs,
+	.is_visible = aspm_ctrl_attrs_are_visible,
+};
+
 static int __init pcie_aspm_disable(char *str)
 {
 	if (!strcmp(str, "off")) {
-- 
2.23.0

[PATCH v6 4/4] PCI/ASPM: Remove Kconfig option PCIEASPM_DEBUG and related code

[Heiner Kallweit]

Now that we have sysfs attributes for enabling/disabling the individual
ASPM link states, this debug code isn't needed any longer. Removing this
debug code has been discussed for quite some time, see e.g. [0].

[0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v6:
- add discussion link to commit message
---
 drivers/pci/pci-sysfs.c  |   3 --
 drivers/pci/pci.h        |   8 ---
 drivers/pci/pcie/Kconfig |   7 ---
 drivers/pci/pcie/aspm.c  | 105 ---------------------------------------
 4 files changed, 123 deletions(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 26e36b0d0..8657cdf62 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1330,7 +1330,6 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 	int retval;
 
 	pcie_vpd_create_sysfs_dev_files(dev);
-	pcie_aspm_create_sysfs_dev_files(dev);
 #ifdef CONFIG_PCIEASPM
 	/* update visibility of attributes in this group */
 	sysfs_update_group(&dev->dev.kobj, &aspm_ctrl_attr_group);
@@ -1344,7 +1343,6 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 	return 0;
 
 error:
-	pcie_aspm_remove_sysfs_dev_files(dev);
 	pcie_vpd_remove_sysfs_dev_files(dev);
 	return retval;
 }
@@ -1420,7 +1418,6 @@ int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
 static void pci_remove_capabilities_sysfs(struct pci_dev *dev)
 {
 	pcie_vpd_remove_sysfs_dev_files(dev);
-	pcie_aspm_remove_sysfs_dev_files(dev);
 	if (dev->reset_fn) {
 		device_remove_file(&dev->dev, &dev_attr_reset);
 		dev->reset_fn = 0;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index b2cd21e8c..ae231e3cd 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -541,14 +541,6 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
 static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
 #endif
 
-#ifdef CONFIG_PCIEASPM_DEBUG
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
-#else
-static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) { }
-static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) { }
-#endif
-
 #ifdef CONFIG_PCIE_ECRC
 void pcie_set_ecrc_checking(struct pci_dev *dev);
 void pcie_ecrc_get_policy(char *str);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 362eb8cfa..a2e862d4e 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -79,13 +79,6 @@ config PCIEASPM
 
 	  When in doubt, say Y.
 
-config PCIEASPM_DEBUG
-	bool "Debug PCI Express ASPM"
-	depends on PCIEASPM
-	help
-	  This enables PCI Express ASPM debug support. It will add per-device
-	  interface to control ASPM.
-
 choice
 	prompt "Default ASPM policy"
 	default PCIEASPM_DEFAULT
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 58c0b069d..81510eae5 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1214,111 +1214,6 @@ bool pcie_aspm_enabled(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
 
-#ifdef CONFIG_PCIEASPM_DEBUG
-static ssize_t link_state_show(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	struct pcie_link_state *link_state = pci_device->link_state;
-
-	return sprintf(buf, "%d\n", link_state->aspm_enabled);
-}
-
-static ssize_t link_state_store(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t n)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct pcie_link_state *link, *root = pdev->link_state->root;
-	u32 state;
-
-	if (aspm_disabled)
-		return -EPERM;
-
-	if (kstrtouint(buf, 10, &state))
-		return -EINVAL;
-	if ((state & ~ASPM_STATE_ALL) != 0)
-		return -EINVAL;
-
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	list_for_each_entry(link, &link_list, sibling) {
-		if (link->root != root)
-			continue;
-		pcie_config_aspm_link(link, state);
-	}
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-	return n;
-}
-
-static ssize_t clk_ctl_show(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	struct pcie_link_state *link_state = pci_device->link_state;
-
-	return sprintf(buf, "%d\n", link_state->clkpm_enabled);
-}
-
-static ssize_t clk_ctl_store(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t n)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	bool state;
-
-	if (strtobool(buf, &state))
-		return -EINVAL;
-
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	pcie_set_clkpm_nocheck(pdev->link_state, state);
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-
-	return n;
-}
-
-static DEVICE_ATTR_RW(link_state);
-static DEVICE_ATTR_RW(clk_ctl);
-
-static char power_group[] = "power";
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (!link_state)
-		return;
-
-	if (link_state->aspm_support)
-		sysfs_add_file_to_group(&pdev->dev.kobj,
-			&dev_attr_link_state.attr, power_group);
-	if (link_state->clkpm_capable)
-		sysfs_add_file_to_group(&pdev->dev.kobj,
-			&dev_attr_clk_ctl.attr, power_group);
-}
-
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (!link_state)
-		return;
-
-	if (link_state->aspm_support)
-		sysfs_remove_file_from_group(&pdev->dev.kobj,
-			&dev_attr_link_state.attr, power_group);
-	if (link_state->clkpm_capable)
-		sysfs_remove_file_from_group(&pdev->dev.kobj,
-			&dev_attr_clk_ctl.attr, power_group);
-}
-#endif
-
 static bool pcie_is_aspm_dev(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link;
-- 
2.23.0