Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Dilip Kota <eswara.kota@linux.intel.com>
To: Andrew Murray <andrew.murray@arm.com>, gustavo.pimentel@synopsys.com
Cc: jingoohan1@gmail.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
	martin.blumenstingl@googlemail.com, linux-pci@vger.kernel.org,
	hch@infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, andriy.shevchenko@intel.com,
	cheol.yong.kim@intel.com, chuanhua.lei@linux.intel.com,
	qi-ming.wu@intel.com
Subject: Re: [PATCH v3 2/2] dwc: PCI: intel: Intel PCIe RC controller driver
Date: Thu, 12 Sep 2019 17:23:31 +0800
Message-ID: <cd73e351-5633-bfa8-a4dc-77357d917a0b@linux.intel.com> (raw)
In-Reply-To: <20190912082517.GA9720@e119886-lin.cambridge.arm.com>

Quoting Andrew Murray:
Quoting Gustavo Pimentel:

On 9/12/2019 4:25 PM, Andrew Murray wrote:
> [...]
>>>>>>>>>> +static void intel_pcie_max_link_width_setup(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	u32 mask, val;
>>>>>>>>>> +
>>>>>>>>>> +	/* HW auto bandwidth negotiation must be enabled */
>>>>>>>>>> +	pcie_rc_cfg_wr_mask(lpp, PCIE_LCTLSTS_HW_AW_DIS, 0, PCIE_LCTLSTS);
>>>>>>>>>> +
>>>>>>>>>> +	mask = PCIE_DIRECT_LINK_WIDTH_CHANGE | PCIE_TARGET_LINK_WIDTH;
>>>>>>>>>> +	val = PCIE_DIRECT_LINK_WIDTH_CHANGE | lpp->lanes;
>>>>>>>>>> +	pcie_rc_cfg_wr_mask(lpp, mask, val, PCIE_MULTI_LANE_CTRL);
>>>>>>>>> Is this identical functionality to the writing of PCIE_PORT_LINK_CONTROL
>>>>>>>>> in dw_pcie_setup?
>>>>>>>>>
>>>>>>>>> I ask because if the user sets num-lanes in the DT, will it have the
>>>>>>>>> desired effect?
>>>>>>>> intel_pcie_max_link_width_setup() function will be called by sysfs attribute pcie_width_store() to change on the fly.
>>>>>>> Indeed, but a user may also set num-lanes in the device tree. I'm wondering
>>>>>>> if, when set in device-tree, it will have the desired effect. Because I don't
>>>>>>> see anything similar to PCIE_LCTLSTS_HW_AW_DIS in dw_pcie_setup which is what
>>>>>>> your function does here.
>>>>>>>
>>>>>>> I guess I'm trying to avoid the suitation where num-lanes doesn't have the
>>>>>>> desired effect and the only way to set the num-lanes is throught the sysfs
>>>>>>> control.
>>>>>> I will check this and get back to you.
>>>> intel_pcie_max_link_width_setup() is doing the lane resizing which is
>>>> different from the link up/establishment happening during probe. Also
>>>> PCIE_LCTLSTS_HW_AW_DIS default value is 0 so not setting during the probe or
>>>> dw_pcie_setup.
>>>>
>>>> intel_pcie_max_link_width_setup() is programming as per the designware PCIe
>>>> controller databook instructions for lane resizing.
>>>>
>>>> Below lines are from Designware PCIe databook for lane resizing.
>>>>
>>>>    Program the TARGET_LINK_WIDTH[5:0] field of the MULTI_LANE_CONTROL_OFF
>>>> register.
>>>>    Program the DIRECT_LINK_WIDTH_CHANGE2 field of the MULTI_LANE_CONTROL_OFF
>>>> register.
>>>> It is assumed that the PCIE_CAP_HW_AUTO_WIDTH_DISABLE field in the
>>>> LINK_CONTROL_LINK_STATUS_REG register is 0.
>>> OK, so there is a difference between initial training and then resizing
>>> of the link. Given that this is not Intel specific, should this function
>>> exist within the designware driver for the benefit of others?
>> I am ok to add if maintainer agrees with it.

Gustavo Pimentel,

Could you please let us know your opinion on this.

[...]

>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static void intel_pcie_port_logic_setup(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	u32 val, mask, fts;
>>>>>>>>>> +
>>>>>>>>>> +	switch (lpp->max_speed) {
>>>>>>>>>> +	case PCIE_LINK_SPEED_GEN1:
>>>>>>>>>> +	case PCIE_LINK_SPEED_GEN2:
>>>>>>>>>> +		fts = PCIE_AFR_GEN12_FTS_NUM_DFT;
>>>>>>>>>> +		break;
[...]
>>>>>>>>>> +
>>>>>>>>>> +	if (device_property_read_u32(dev, "max-link-speed", &lpp->link_gen))
>>>>>>>>>> +		lpp->link_gen = 0; /* Fallback to auto */
>>>>>>>>> Is it possible to use of_pci_get_max_link_speed here instead?
>>>>>>>> Thanks for pointing it. of_pci_get_max_link_speed() can be used here. I will
>>>>>>>> update it in the next patch revision.
>>>> I just remember, earlier we were using  of_pci_get_max_link_speed() itself.
>>>> As per reviewer comments changed to device_property_read_u32() to maintain
>>>> symmetry in parsing device tree properties from device node.
>>>> Let me know your view.
>>> I couldn't find an earlier version of this series that used of_pci_get_max_link_speed,
>>> have I missed it somewhere?
>> It happened in our internal review.
>> What's your suggestion please, either to go with symmetry in parsing
>> "device_property_read_u32()" or with pci helper function
>> "of_pci_get_max_link_speed"?
> I'd prefer the helper, the added benefit of this is additional error checking.
> It also means users can be confident that max-link-speed will behave in the
> same way as other host controllers that use this field.
Ok, i will update it in the next patch version.


Regards,

Dilip

>
> Thanks,
>
> Andrew Murray
>
>>>>>>>>>> +
>>>>>>>>>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "app");
>>>>>>>>>> +	if (!res)
>>>>>>>>>> +		return -ENXIO;
>>>>>>>>>> +
>>>>>>>>>> +	lpp->app_base = devm_ioremap_resource(dev, res);
>>>>>>>>>> +	if (IS_ERR(lpp->app_base))
>>>>>>>>>> +		return PTR_ERR(lpp->app_base);
>>>>>>>>>> +
>>>>>>>>>> +	ret = intel_pcie_ep_rst_init(lpp);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>> Given that this is called from a function '..._get_resources' I don't think
>>>>>>>>> we should be resetting anything here.
>>>>>>>> Agree. I will move it out of get_resources().
>>>>>>>>>> +
>>>>>>>>>> +	lpp->phy = devm_phy_get(dev, "pciephy");
>>>>>>>>>> +	if (IS_ERR(lpp->phy)) {
>>>>>>>>>> +		ret = PTR_ERR(lpp->phy);
>>>>>>>>>> +		if (ret != -EPROBE_DEFER)
>>>>>>>>>> +			dev_err(dev, "couldn't get pcie-phy: %d\n", ret);
>>>>>>>>>> +		return ret;
>>>>>>>>>> +	}
>>>>>>>>>> +	return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static void intel_pcie_deinit_phy(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	phy_exit(lpp->phy);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_wait_l2(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	u32 value;
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	if (lpp->max_speed < PCIE_LINK_SPEED_GEN3)
>>>>>>>>>> +		return 0;
>>>>>>>>>> +
>>>>>>>>>> +	/* Send PME_TURN_OFF message */
>>>>>>>>>> +	pcie_app_wr_mask(lpp, PCIE_APP_MSG_XMT_PM_TURNOFF,
>>>>>>>>>> +			 PCIE_APP_MSG_XMT_PM_TURNOFF, PCIE_APP_MSG_CR);
>>>>>>>>>> +
>>>>>>>>>> +	/* Read PMC status and wait for falling into L2 link state */
>>>>>>>>>> +	ret = readl_poll_timeout(lpp->app_base + PCIE_APP_PMC, value,
>>>>>>>>>> +				 (value & PCIE_APP_PMC_IN_L2), 20,
>>>>>>>>>> +				 jiffies_to_usecs(5 * HZ));
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		dev_err(lpp->pci.dev, "PCIe link enter L2 timeout!\n");
>>>>>>>>>> +
>>>>>>>>>> +	return ret;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static void intel_pcie_turn_off(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	if (dw_pcie_link_up(&lpp->pci))
>>>>>>>>>> +		intel_pcie_wait_l2(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	/* Put EP in reset state */
>>>>>>>>> EP?
>>>>>>>> End point device. I will update it.
>>>>>>> Is this not a host bridge controller?
>>>>>> It is PERST#, signals hardware reset to the End point .
>>>>>>            /* Put EP in reset state */
>>>>>>            intel_pcie_device_rst_assert(lpp);
>>>>> OK.
>>>>>
>>>>>>>>>> +	intel_pcie_device_rst_assert(lpp);
>>>>>>>>>> +	pcie_rc_cfg_wr_mask(lpp, PCI_COMMAND_MEMORY, 0, PCI_COMMAND);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_host_setup(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_core_rst_assert(lpp);
>>>>>>>>>> +	intel_pcie_device_rst_assert(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	ret = phy_init(lpp->phy);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_core_rst_deassert(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	ret = clk_prepare_enable(lpp->core_clk);
>>>>>>>>>> +	if (ret) {
>>>>>>>>>> +		dev_err(lpp->pci.dev, "Core clock enable failed: %d\n", ret);
>>>>>>>>>> +		goto clk_err;
>>>>>>>>>> +	}
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_rc_setup(lpp);
>>>>>>>>>> +	ret = intel_pcie_app_logic_setup(lpp);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		goto app_init_err;
>>>>>>>>>> +
>>>>>>>>>> +	ret = intel_pcie_setup_irq(lpp);
>>>>>>>>>> +	if (!ret)
>>>>>>>>>> +		return ret;
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_turn_off(lpp);
>>>>>>>>>> +app_init_err:
>>>>>>>>>> +	clk_disable_unprepare(lpp->core_clk);
>>>>>>>>>> +clk_err:
>>>>>>>>>> +	intel_pcie_core_rst_assert(lpp);
>>>>>>>>>> +	intel_pcie_deinit_phy(lpp);
>>>>>>>>>> +	return ret;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static ssize_t
>>>>>>>>>> +pcie_link_status_show(struct device *dev, struct device_attribute *attr,
>>>>>>>>>> +		      char *buf)
>>>>>>>>>> +{
>>>>>>>>>> +	u32 reg, width, gen;
>>>>>>>>>> +	struct intel_pcie_port *lpp;
>>>>>>>>>> +
>>>>>>>>>> +	lpp = dev_get_drvdata(dev);
>>>>>>>>>> +
>>>>>>>>>> +	reg = pcie_rc_cfg_rd(lpp, PCIE_LCTLSTS);
>>>>>>>>>> +	width = FIELD_GET(PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH, reg);
>>>>>>>>>> +	gen = FIELD_GET(PCIE_LCTLSTS_LINK_SPEED, reg);
>>>>>>>>>> +	if (gen > lpp->max_speed)
>>>>>>>>>> +		return -EINVAL;
>>>>>>>>>> +
>>>>>>>>>> +	return sprintf(buf, "Port %2u Width x%u Speed %s GT/s\n", lpp->id,
>>>>>>>>>> +		       width, pcie_link_gen_to_str(gen));
>>>>>>>>>> +}
>>>>>>>>>> +static DEVICE_ATTR_RO(pcie_link_status);
>>>>>>>>>> +
>>>>>>>>>> +static ssize_t pcie_speed_store(struct device *dev,
>>>>>>>>>> +				struct device_attribute *attr,
>>>>>>>>>> +				const char *buf, size_t len)
>>>>>>>>>> +{
>>>>>>>>>> +	struct intel_pcie_port *lpp;
>>>>>>>>>> +	unsigned long val;
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	lpp = dev_get_drvdata(dev);
>>>>>>>>>> +
>>>>>>>>>> +	ret = kstrtoul(buf, 10, &val);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>>> +
>>>>>>>>>> +	if (val > lpp->max_speed)
>>>>>>>>>> +		return -EINVAL;
>>>>>>>>>> +
>>>>>>>>>> +	lpp->link_gen = val;
>>>>>>>>>> +	intel_pcie_max_speed_setup(lpp);
>>>>>>>>>> +	intel_pcie_speed_change_disable(lpp);
>>>>>>>>>> +	intel_pcie_speed_change_enable(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	return len;
>>>>>>>>>> +}
>>>>>>>>>> +static DEVICE_ATTR_WO(pcie_speed);
>>>>>>>>>> +
>>>>>>>>>> +/*
>>>>>>>>>> + * Link width change on the fly is not always successful.
>>>>>>>>>> + * It also depends on the partner.
>>>>>>>>>> + */
>>>>>>>>>> +static ssize_t pcie_width_store(struct device *dev,
>>>>>>>>>> +				struct device_attribute *attr,
>>>>>>>>>> +				const char *buf, size_t len)
>>>>>>>>>> +{
>>>>>>>>>> +	struct intel_pcie_port *lpp;
>>>>>>>>>> +	unsigned long val;
>>>>>>>>>> +
>>>>>>>>>> +	lpp = dev_get_drvdata(dev);
>>>>>>>>>> +
>>>>>>>>>> +	if (kstrtoul(buf, 10, &val))
>>>>>>>>>> +		return -EINVAL;
>>>>>>>>>> +
>>>>>>>>>> +	if (val > lpp->max_width)
>>>>>>>>>> +		return -EINVAL;
>>>>>>>>>> +
>>>>>>>>>> +	lpp->lanes = val;
>>>>>>>>>> +	intel_pcie_max_link_width_setup(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	return len;
>>>>>>>>>> +}
>>>>>>>>>> +static DEVICE_ATTR_WO(pcie_width);
>>>>>>>>> You mentioned that a use-case for changing width/speed on the fly was to
>>>>>>>>> control power consumption (and this also helps debugging issues). As I
>>>>>>>>> understand there is no current support for this in the kernel - yet it is
>>>>>>>>> something that would provide value.
>>>>>>>>>
>>>>>>>>> I haven't looked in much detail, however as I understand the PCI spec
>>>>>>>>> allows an upstream partner to change the link speed and retrain. (I'm not
>>>>>>>>> sure about link width). Given that we already have
>>>>>>>>> [current,max]_link_[speed,width] is sysfs for each PCI device, it would
>>>>>>>>> seem natural to extend this to allow for writing a max width or speed.
>>>>>>>>>
>>>>>>>>> So ideally this type of thing would be moved to the core or at least in
>>>>>>>>> the dwc driver. This way the benefits can be applied to more devices on
>>>>>>>>> larger PCI fabrics - Though perhaps others here will have a different view
>>>>>>>>> and I'm keen to hear them.
>>>>>>>>>
>>>>>>>>> I'm keen to limit the differences between the DWC controller drivers and
>>>>>>>>> unify common code - thus it would be helpful to have a justification as to
>>>>>>>>> why this is only relevant for this controller.
>>>>>>>>>
>>>>>>>>> For user-space only control, it is possible to achieve what you have here
>>>>>>>>> with userspace utilities (something like setpci) (assuming the standard
>>>>>>>>> looking registers you currently access are exposed in the normal config
>>>>>>>>> space way - though PCIe capabilities).
>>>>>>>>>
>>>>>>>>> My suggestion would be to drop these changes and later add something that
>>>>>>>>> can benefit more devices. In any case if these changes stay within this
>>>>>>>>> driver then it would be helpful to move them to a separate patch.
>>>>>>>> Sure, i will submit these entity in separate patch.
>>>>>>> Please ensure that all supporting macros, functions and defines go with that
>>>>>>> other patch as well please.
>>>>>> Sure.
>>>>>>>>>> +
>>>>>>>>>> +static struct attribute *pcie_cfg_attrs[] = {
>>>>>>>>>> +	&dev_attr_pcie_link_status.attr,
>>>>>>>>>> +	&dev_attr_pcie_speed.attr,
>>>>>>>>>> +	&dev_attr_pcie_width.attr,
>>>>>>>>>> +	NULL,
>>>>>>>>>> +};
>>>>>>>>>> +ATTRIBUTE_GROUPS(pcie_cfg);
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_sysfs_init(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	return devm_device_add_groups(lpp->pci.dev, pcie_cfg_groups);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static void __intel_pcie_remove(struct intel_pcie_port *lpp)
>>>>>>>>>> +{
>>>>>>>>>> +	pcie_rc_cfg_wr_mask(lpp, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER,
>>>>>>>>>> +			    0, PCI_COMMAND);
>>>>>>>>>> +	intel_pcie_core_irq_disable(lpp);
>>>>>>>>>> +	intel_pcie_turn_off(lpp);
>>>>>>>>>> +	clk_disable_unprepare(lpp->core_clk);
>>>>>>>>>> +	intel_pcie_core_rst_assert(lpp);
>>>>>>>>>> +	intel_pcie_deinit_phy(lpp);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_remove(struct platform_device *pdev)
>>>>>>>>>> +{
>>>>>>>>>> +	struct intel_pcie_port *lpp = platform_get_drvdata(pdev);
>>>>>>>>>> +	struct pcie_port *pp = &lpp->pci.pp;
>>>>>>>>>> +
>>>>>>>>>> +	dw_pcie_host_deinit(pp);
>>>>>>>>>> +	__intel_pcie_remove(lpp);
>>>>>>>>>> +
>>>>>>>>>> +	return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int __maybe_unused intel_pcie_suspend_noirq(struct device *dev)
>>>>>>>>>> +{
>>>>>>>>>> +	struct intel_pcie_port *lpp = dev_get_drvdata(dev);
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_core_irq_disable(lpp);
>>>>>>>>>> +	ret = intel_pcie_wait_l2(lpp);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>>> +
>>>>>>>>>> +	intel_pcie_deinit_phy(lpp);
>>>>>>>>>> +	clk_disable_unprepare(lpp->core_clk);
>>>>>>>>>> +	return ret;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int __maybe_unused intel_pcie_resume_noirq(struct device *dev)
>>>>>>>>>> +{
>>>>>>>>>> +	struct intel_pcie_port *lpp = dev_get_drvdata(dev);
>>>>>>>>>> +
>>>>>>>>>> +	return intel_pcie_host_setup(lpp);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_rc_init(struct pcie_port *pp)
>>>>>>>>>> +{
>>>>>>>>>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>>>>>>>>>> +	struct intel_pcie_port *lpp = dev_get_drvdata(pci->dev);
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	/* RC/host initialization */
>>>>>>>>>> +	ret = intel_pcie_host_setup(lpp);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>> Insert new line here.
>>>>>>>> Ok.
>>>>>>>>>> +	ret = intel_pcie_sysfs_init(lpp);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		__intel_pcie_remove(lpp);
>>>>>>>>>> +	return ret;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +int intel_pcie_msi_init(struct pcie_port *pp)
>>>>>>>>>> +{
>>>>>>>>>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>>>>>>>>>> +
>>>>>>>>>> +	dev_dbg(pci->dev, "PCIe MSI/MSIx is handled by MSI in x86 processor\n");
>>>>>>>>> What about other processors? (Noting that this driver doesn't depend on
>>>>>>>>> any specific ARCH in the KConfig).
>>>>>>>> Agree. i will mark the dependency in Kconfig.
>>>>>>> OK, please also see how other drivers use the COMPILE_TEST Kconfig option.
>>>>>> Ok sure.
>>>>>>> I'd suggest that the dev_dbg just becomes a code comment.
>>>> Ok
>>>>>>>>>> +	return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +u64 intel_pcie_cpu_addr(struct dw_pcie *pcie, u64 cpu_addr)
>>>>>>>>>> +{
>>>>>>>>>> +	return cpu_addr + BUS_IATU_OFFS;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static const struct dw_pcie_ops intel_pcie_ops = {
>>>>>>>>>> +	.cpu_addr_fixup = intel_pcie_cpu_addr,
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +static const struct dw_pcie_host_ops intel_pcie_dw_ops = {
>>>>>>>>>> +	.host_init =		intel_pcie_rc_init,
>>>>>>>>>> +	.msi_host_init =	intel_pcie_msi_init,
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +static const struct intel_pcie_soc pcie_data = {
>>>>>>>>>> +	.pcie_ver =		0x520A,
>>>>>>>>>> +	.pcie_atu_offset =	0xC0000,
>>>>>>>>>> +	.num_viewport =		3,
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +static int intel_pcie_probe(struct platform_device *pdev)
>>>>>>>>>> +{
>>>>>>>>>> +	const struct intel_pcie_soc *data;
>>>>>>>>>> +	struct device *dev = &pdev->dev;
>>>>>>>>>> +	struct intel_pcie_port *lpp;
>>>>>>>>>> +	struct pcie_port *pp;
>>>>>>>>>> +	struct dw_pcie *pci;
>>>>>>>>>> +	int ret;
>>>>>>>>>> +
>>>>>>>>>> +	lpp = devm_kzalloc(dev, sizeof(*lpp), GFP_KERNEL);
>>>>>>>>>> +	if (!lpp)
>>>>>>>>>> +		return -ENOMEM;
>>>>>>>>>> +
>>>>>>>>>> +	platform_set_drvdata(pdev, lpp);
>>>>>>>>>> +	pci = &lpp->pci;
>>>>>>>>>> +	pci->dev = dev;
>>>>>>>>>> +	pp = &pci->pp;
>>>>>>>>>> +
>>>>>>>>>> +	ret = intel_pcie_get_resources(pdev);
>>>>>>>>>> +	if (ret)
>>>>>>>>>> +		return ret;
>>>>>>>>>> +
>>>>>>>>>> +	data = device_get_match_data(dev);
>>>>>>>>>> +	pci->ops = &intel_pcie_ops;
>>>>>>>>>> +	pci->version = data->pcie_ver;
>>>>>>>>>> +	pci->atu_base = pci->dbi_base + data->pcie_atu_offset;
>>>>>>>>>> +	pp->ops = &intel_pcie_dw_ops;
>>>>>>>>>> +
>>>>>>>>>> +	ret = dw_pcie_host_init(pp);
>>>>>>>>>> +	if (ret) {
>>>>>>>>>> +		dev_err(dev, "cannot initialize host\n");
>>>>>>>>>> +		return ret;
>>>>>>>>>> +	}
>>>>>>>>> Add a new line after the closing brace.
>>>>>>>> Ok
>>>>>>>>>> +	/* Intel PCIe doesn't configure IO region, so configure
>>>>>>>>>> +	 * viewport to not to access IO region during register
>>>>>>>>>> +	 * read write operations.
>>>>>>>>>> +	 */
>>>>>>>>>> +	pci->num_viewport = data->num_viewport;
>>>>>>>>>> +	dev_info(dev,
>>>>>>>>>> +		 "Intel AXI PCIe Root Complex Port %d Init Done\n", lpp->id);
>>>>>>>>>> +	return ret;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static const struct dev_pm_ops intel_pcie_pm_ops = {
>>>>>>>>>> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pcie_suspend_noirq,
>>>>>>>>>> +				      intel_pcie_resume_noirq)
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +static const struct of_device_id of_intel_pcie_match[] = {
>>>>>>>>>> +	{ .compatible = "intel,lgm-pcie", .data = &pcie_data },
>>>>>>>>>> +	{}
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +static struct platform_driver intel_pcie_driver = {
>>>>>>>>>> +	.probe = intel_pcie_probe,
>>>>>>>>>> +	.remove = intel_pcie_remove,
>>>>>>>>>> +	.driver = {
>>>>>>>>>> +		.name = "intel-lgm-pcie",
>>>>>>>>> Is there a reason why the we use intel-lgm-pcie here and pcie-intel-axi
>>>>>>>>> elsewhere? What does lgm mean?
>>>>>>>> lgm is the name of intel SoC.  I will name it to pcie-intel-axi to be
>>>>>>>> generic.
>>>>>>> I'm keen to ensure that it is consistently named. I've seen other comments
>>>>>>> regarding what the name should be - I don't have a strong opinion though
>>>>>>> I do think that *-axi may be too generic.
>>>> This PCIe driver is for the Intel Gateway SoCs. So how about naming it is as
>>>> "pcie-intel-gw"; pcie-intel-gw.c and Kconfig as PCIE_INTEL_GW.
>>> I don't have a problem with this, though others may have differing views.
>> Sure. thank you.
>>> Thanks,
>>>
>>> Andrew Murray
>>>
>>>> Regards,
>>>> Dilip
>>>>
>>>>>> Ok, i will check and get back to you on this.
>>>>>> Regards,
>>>>> Thanks,
>>>>>
>>>>> Andrew Murray
>>>>>
>>>>>> Dilip
>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Andrew Murray
>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> Andrew Murray
>>>>>>>>>
>>>>>>>>>> +		.of_match_table = of_intel_pcie_match,
>>>>>>>>>> +		.pm = &intel_pcie_pm_ops,
>>>>>>>>>> +	},
>>>>>>>>>> +};
>>>>>>>>>> +builtin_platform_driver(intel_pcie_driver);
>>>>>>>>>> -- 
>>>>>>>>>> 2.11.0
>>>>>>>>>>

  reply index

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-04 10:10 [PATCH v3 0/2] PCI: Add Intel PCIe Driver and respective dt-binding yaml file Dilip Kota
2019-09-04 10:10 ` [PATCH v3 1/2] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller Dilip Kota
2019-09-05  2:23   ` Chuan Hua, Lei
2019-09-06 10:39     ` Dilip Kota
2019-09-05 20:31   ` Martin Blumenstingl
2019-09-06  3:22     ` Chuan Hua, Lei
2019-09-06 17:17       ` Martin Blumenstingl
2019-09-06 17:48         ` Andy Shevchenko
2019-09-07  1:48           ` Ivan Gorinov
2019-09-06  9:19     ` Andy Shevchenko
2019-09-09  6:52       ` Dilip Kota
2019-09-17 18:33       ` Rob Herring
2019-09-18  6:48         ` Dilip Kota
2019-09-17 18:40   ` Rob Herring
2019-09-18  6:56     ` Dilip Kota
     [not found]       ` <b7e549bb-b46c-c393-50ac-9ef3b198fd49@linux.intel.com>
2019-10-03  6:35         ` Fwd: " Dilip Kota
2019-09-04 10:10 ` [PATCH v3 2/2] dwc: PCI: intel: Intel PCIe RC controller driver Dilip Kota
2019-09-04 13:05   ` Andy Shevchenko
2019-09-06 10:39     ` Dilip Kota
2019-09-05  2:30   ` Chuan Hua, Lei
2019-09-05 10:45   ` Andrew Murray
2019-09-05 11:26     ` Christoph Hellwig
2019-09-05 11:40     ` Andy Shevchenko
2019-09-12  7:01       ` Dilip Kota
2019-09-06 10:58     ` Dilip Kota
2019-09-06 11:20       ` Andrew Murray
2019-09-09  6:51         ` Dilip Kota
2019-09-09  8:31           ` Andrew Murray
2019-09-10  8:08             ` Dilip Kota
     [not found]             ` <22857835-1f98-b251-c94b-16b4b0a6dba2@linux.intel.com>
2019-09-11 10:30               ` Andrew Murray
2019-09-12  6:58                 ` Dilip Kota
2019-09-12  8:25                   ` Andrew Murray
2019-09-12  9:23                     ` Dilip Kota [this message]
2019-09-12 10:49                       ` Gustavo Pimentel
2019-09-13  9:20                         ` Dilip Kota
2019-09-13 10:12                           ` andriy.shevchenko
2019-09-16  3:03                             ` Dilip Kota

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cd73e351-5633-bfa8-a4dc-77357d917a0b@linux.intel.com \
    --to=eswara.kota@linux.intel.com \
    --cc=andrew.murray@arm.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=chuanhua.lei@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hch@infradead.org \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=qi-ming.wu@intel.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox