linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Binghui Wang <wangbinghui@hisilicon.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Xiaowei Song <songxiaowei@hisilicon.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: [PATCH 02/13] doc: bindings: kirin-pcie.txt: convert it to yaml
Date: Tue,  2 Feb 2021 14:29:47 +0100	[thread overview]
Message-ID: <d66921f2f53b5d5564ce32b6a688e495e387d8c5.1612271903.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1612271903.git.mchehab+huawei@kernel.org>

Convert	the file into a	JSON description at the	yaml format.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../bindings/pci/hisilicon,kirin-pcie.yaml    | 90 +++++++++++++++++++
 .../devicetree/bindings/pci/kirin-pcie.txt    | 50 -----------
 MAINTAINERS                                   |  2 +-
 3 files changed, 91 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 000000000000..46f9f3f25dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+  - Xiaowei Song <songxiaowei@hisilicon.com>
+  - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+  It shares common functions with the PCIe DesignWare core driver.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+#  - $ref: snps,pcie.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,kirin960-pcie
+
+  reg:
+    description: |
+      Should contain rc_dbi, apb, phy, config registers location and length.
+
+  reg-names:
+    items:
+      - const: dbi          # controller configuration registers
+      - const: apb          # apb Ctrl register defined by Kirin
+      - const: phy          # apb PHY register defined by Kirin
+      - const: config       # PCIe configuration space registers
+
+  reset-gpios:
+    description: The GPIO to generate PCIe PERST# assert and deassert signal.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - reset-gpios
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie: pcie@f4000000 {
+        compatible = "hisilicon,kirin960-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000>,
+              <0x0 0xff3fe000 0x0 0x1000>,
+              <0x0 0xf3f20000 0x0 0x40000>,
+              <0x0 0xF4000000 0 0x2000>;
+        reg-names = "dbi","apb","phy", "config";
+        bus-range = <0x0  0x1>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <0 283 4>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0xf800 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+        clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+                      "pcie_apb_sys", "pcie_aclk";
+        reset-gpios = <&gpio11 1 0 >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
deleted file mode 100644
index a38f8e38a67b..000000000000
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-HiSilicon Kirin SoCs PCIe host DT description
-
-Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,pcie.yaml.
-
-Additional properties are described here:
-
-Required properties
-- compatible:
-	"hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
-- reg: Should contain rc_dbi, apb, phy, config registers location and length.
-- reg-names: Must include the following entries:
-  "dbi": controller configuration registers;
-  "apb": apb Ctrl register defined by Kirin;
-  "phy": apb PHY register defined by Kirin;
-  "config": PCIe configuration space registers.
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-
-Optional properties:
-
-Example based on kirin960:
-
-	pcie@f4000000 {
-		compatible = "hisilicon,kirin-pcie";
-		reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
-		      <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
-		reg-names = "dbi","apb","phy", "config";
-		bus-range = <0x0  0x1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
-		num-lanes = <1>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &gic 0 0 0  282 4>,
-				<0x0 0 0 2 &gic 0 0 0  283 4>,
-				<0x0 0 0 3 &gic 0 0 0  284 4>,
-				<0x0 0 0 4 &gic 0 0 0  285 4>;
-		clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
-			 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
-			 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
-		clock-names = "pcie_phy_ref", "pcie_aux",
-			      "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
-		reset-gpios = <&gpio11 1 0 >;
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bcba0d4994c..701d7115af74 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13817,7 +13817,7 @@ M:	Xiaowei Song <songxiaowei@hisilicon.com>
 M:	Binghui Wang <wangbinghui@hisilicon.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/kirin-pcie.txt
+F:	Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
 F:	drivers/pci/controller/dwc/pcie-kirin.c
 
 PCIE DRIVER FOR HISILICON STB
-- 
2.29.2


  parent reply	other threads:[~2021-02-02 13:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-02 13:29 [PATCH 00/13] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml Mauro Carvalho Chehab
2021-02-02 17:44   ` Rob Herring
2021-02-03  6:49     ` Mauro Carvalho Chehab
2021-02-04 17:29       ` Rob Herring
2021-02-04 18:29         ` Mauro Carvalho Chehab
2021-02-02 13:29 ` Mauro Carvalho Chehab [this message]
2021-02-02 13:29 ` [PATCH 03/13] doc: bindings: add new parameters used by Hikey 970 Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 04/13] pci: dwc: pcie-kirin: add HI3670 PCI-E controller support Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 06/13] pci: dwc: pcie-kirin: simplify error handling logic Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 07/13] pci: dwc: pcie-kirin: simplify kirin 970 get resource logic Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 08/13] pci: dwc: pcie-kirin: place common init code altogether Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 09/13] pci: dwc: pcie-kirin: allow to optionally require a regulator Mauro Carvalho Chehab
2021-02-02 13:41   ` Mark Brown
2021-02-02 14:50     ` Mauro Carvalho Chehab
2021-02-02 16:02       ` Mark Brown
2021-02-02 13:29 ` [PATCH 10/13] pci: dwc: pcie-kirin: allow using multiple reset GPIOs Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 11/13] pci: dwc: pcie-kirin: add support for clkreq GPIOs Mauro Carvalho Chehab
2021-02-02 13:29 ` [PATCH 12/13] pci: dwc: pcie-kirin: cleanup kirin970_pcie_get_eyeparam() Mauro Carvalho Chehab
2021-02-02 14:48 ` [PATCH 00/13] Add support for Hikey 970 PCIe Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d66921f2f53b5d5564ce32b6a688e495e387d8c5.1612271903.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).