Hi,

On Mon 13 Sep 21, 10:00, Maxime Ripard wrote:
> On Fri, Sep 10, 2021 at 08:41:28PM +0200, Paul Kocialkowski wrote:
> > The Allwinner A31 MIPI D-PHY block supports both tx and rx directions,
> > although each instance of the block is meant to be used in one
> > direction only. There will typically be one instance for MIPI DSI and
> > one for MIPI CSI-2 (it seems unlikely to ever see a shared instance).
> > 
> > Describe the direction with a new allwinner,direction property.
> > For backwards compatibility, the property is optional and tx mode
> > should be assumed by default.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> >  .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml  | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> > index d0b541a461f3..303bbaf3b915 100644
> > --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> > @@ -37,6 +37,18 @@ properties:
> >    resets:
> >      maxItems: 1
> >  
> > +  allwinner,direction:
> > +    $ref: '/schemas/types.yaml#/definitions/string'
> > +    description: |
> > +      Direction of the D-PHY:
> > +      - "rx" for receiving (e.g. when used with MIPI CSI-2);
> > +      - "tx" for transmitting (e.g. when used with MIPI DSI).
> > +
> > +      When the property is missing, "tx" direction is assumed.
> 
> You can provide this using default

Understood.

> > +    oneOf:
> > +      - const: tx
> > +      - const: rx
> > +
> 
> enum?

Ah yes, enum feels like a better fit!

Thanks,

Paul

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com