linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, swboyd@chromium.org,
	sivaa@codeaurora.org, Andy Gross <agross@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	linux-pm@vger.kernel.org
Subject: [PATCH v2 6/9] drivers: thermal: tsens: Add watchdog support
Date: Tue,  3 Dec 2019 10:53:27 +0530	[thread overview]
Message-ID: <06b51a577b17120cd6003408034ca15ff9d33b70.1575349416.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1575349416.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1575349416.git.amit.kucheria@linaro.org>

TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS
HW FSM is stuck. Add support to detect and restart the FSM in the
driver. The watchdog is configured by the bootloader, we just enable the
feature in the kernel.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/qcom/tsens-common.c | 38 +++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens-v2.c     | 10 ++++++++
 drivers/thermal/qcom/tsens.h        | 14 +++++++++++
 3 files changed, 62 insertions(+)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 4cf550766cf66..ecbc722eb3487 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -377,6 +377,24 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data)
 	struct tsens_irq_data d;
 	unsigned long flags;
 	int temp, ret, i;
+	u32 wdog_status, wdog_count;
+
+	if (priv->feat->has_watchdog) {
+		/* Watchdog is present only on v2.3+ */
+		ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status);
+		if (ret)
+			return ret;
+
+		/* Clear WDOG interrupt */
+		regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
+		regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
+
+		ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count);
+		if (ret)
+			return ret;
+		if (wdog_count)
+			dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count);
+	}
 
 	for (i = 0; i < priv->num_sensors; i++) {
 		const struct tsens_sensor *s = &priv->sensor[i];
@@ -684,6 +702,7 @@ int __init init_common(struct tsens_priv *priv)
 {
 	void __iomem *tm_base, *srot_base;
 	struct device *dev = priv->dev;
+	u32 ver_minor;
 	struct resource *res;
 	u32 enabled;
 	int ret, i, j;
@@ -733,6 +752,9 @@ int __init init_common(struct tsens_priv *priv)
 			if (IS_ERR(priv->rf[i]))
 				return PTR_ERR(priv->rf[i]);
 		}
+		ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
+		if (ret)
+			goto err_put_device;
 	}
 
 	priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -793,6 +815,22 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 
+	if (tsens_version(priv) > VER_1_X &&  ver_minor > 2) {
+		/* Watchdog is present only on v2.3+ */
+		priv->feat->has_watchdog = 1;
+		for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
+			priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
+							      priv->fields[i]);
+			if (IS_ERR(priv->rf[i])) {
+				ret = PTR_ERR(priv->rf[i]);
+				goto err_put_device;
+			}
+		}
+		/* Enable WDOG and disable cycle completion monitoring */
+		regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
+		regmap_field_write(priv->rf[CC_MON_MASK], 1);
+	}
+
 	spin_lock_init(&priv->ul_lock);
 	tsens_enable_irq(priv);
 	tsens_debug_init(op);
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index ce5ef0055d136..b293ed32174b5 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -24,6 +24,7 @@
 #define TM_Sn_CRITICAL_THRESHOLD_OFF	0x0060
 #define TM_Sn_STATUS_OFF		0x00a0
 #define TM_TRDY_OFF			0x00e4
+#define TM_WDOG_LOG_OFF		0x013c
 
 /* v2.x: 8996, 8998, sdm845 */
 
@@ -66,6 +67,15 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR,  TM_CRITICAL_INT_CLEAR_OFF),
 	REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK,   TM_CRITICAL_INT_MASK_OFF),
 
+	/* WATCHDOG on v2.3 or later */
+	[WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31),
+	[WDOG_BARK_CLEAR]  = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  31, 31),
+	[WDOG_BARK_MASK]   = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   31, 31),
+	[CC_MON_STATUS]    = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30),
+	[CC_MON_CLEAR]     = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF,  30, 30),
+	[CC_MON_MASK]      = REG_FIELD(TM_CRITICAL_INT_MASK_OFF,   30, 30),
+	[WDOG_BARK_COUNT]  = REG_FIELD(TM_WDOG_LOG_OFF,             0,  7),
+
 	/* Sn_STATUS */
 	REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP,       TM_Sn_STATUS_OFF,  0,  11),
 	REG_FIELD_FOR_EACH_SENSOR16(VALID,           TM_Sn_STATUS_OFF, 21,  21),
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 05d5f73178683..f93f7509a5a46 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -440,6 +440,18 @@ enum regfield_ids {
 	CRIT_THRESH_13,
 	CRIT_THRESH_14,
 	CRIT_THRESH_15,
+
+	/* WATCHDOG */
+	WDOG_BARK_STATUS,
+	WDOG_BARK_CLEAR,
+	WDOG_BARK_MASK,
+	WDOG_BARK_COUNT,
+
+	/* CYCLE COMPLETION MONITOR */
+	CC_MON_STATUS,
+	CC_MON_CLEAR,
+	CC_MON_MASK,
+
 	MIN_STATUS_0,		/* MIN threshold violated */
 	MIN_STATUS_1,
 	MIN_STATUS_2,
@@ -484,6 +496,7 @@ enum regfield_ids {
  * @adc:      do the sensors only output adc code (instead of temperature)?
  * @srot_split: does the IP neatly splits the register space into SROT and TM,
  *              with SROT only being available to secure boot firmware?
+ * @has_watchdog: does this IP support watchdog functionality?
  * @max_sensors: maximum sensors supported by this version of the IP
  */
 struct tsens_features {
@@ -491,6 +504,7 @@ struct tsens_features {
 	unsigned int crit_int:1;
 	unsigned int adc:1;
 	unsigned int srot_split:1;
+	unsigned int has_watchdog:1;
 	unsigned int max_sensors;
 };
 
-- 
2.17.1


      parent reply	other threads:[~2019-12-03  5:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03  5:23 [PATCH v2 0/9] thermal: tsens: Handle critical interrupts Amit Kucheria
2019-12-03  5:23 ` [PATCH v2 1/9] drivers: thermal: tsens: De-constify struct tsens_features Amit Kucheria
2019-12-03  5:23 ` [PATCH v2 2/9] drivers: thermal: tsens: Pass around struct tsens_sensor as a constant Amit Kucheria
2019-12-03  5:23 ` [PATCH v2 3/9] drivers: thermal: tsens: use simpler variables Amit Kucheria
2019-12-03  5:23 ` [PATCH v2 4/9] drivers: thermal: tsens: Release device in success path Amit Kucheria
2019-12-03  5:23 ` [PATCH v2 5/9] drivers: thermal: tsens: Add critical interrupt support Amit Kucheria
2019-12-03  5:23 ` Amit Kucheria [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=06b51a577b17120cd6003408034ca15ff9d33b70.1575349416.git.amit.kucheria@linaro.org \
    --to=amit.kucheria@linaro.org \
    --cc=agross@kernel.org \
    --cc=amit.kucheria@verdurent.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=sivaa@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).