From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: [PATCH v5 5/7] thermal:boost: Automatic enable/disable of BOOST feature Date: Thu, 04 Jul 2013 10:50:28 +0200 Message-ID: <1372927830-2949-6-git-send-email-l.majewski@samsung.com> References: <1370502472-7249-1-git-send-email-l.majewski@samsung.com> <1372927830-2949-1-git-send-email-l.majewski@samsung.com> Return-path: In-reply-to: <1372927830-2949-1-git-send-email-l.majewski@samsung.com> Sender: cpufreq-owner@vger.kernel.org To: Viresh Kumar , "Rafael J. Wysocki" , Zhang Rui , Eduardo Valentin Cc: "cpufreq@vger.kernel.org" , Linux PM list , Jonghwa Lee , Lukasz Majewski , l.majewski@majess.pl, linux-kernel , Andre Przywara , Daniel Lezcano , Kukjin Kim , Myungjoo Ham List-Id: linux-pm@vger.kernel.org This patch provides auto disable/enable operation for boost. When any defined trip point is passed, the boost is disabled. In that moment thermal monitor workqueue is woken up and it monitors if the device temperature drops below 75% of the smallest trip point. When device cools down, the boost is enabled again. Signed-off-by: Lukasz Majewski Signed-off-by: Myungjoo Ham --- Changes for v5: - Move boost disable code from cpu_cooling.c to thermal_core.c (to handle_non_critical_trips) - Extent struct thermal_zone_device by adding overheated bool flag - Implement auto enable of boost after device cools down - Introduce boost_polling flag, which indicates if thermal uses it's predefined pool delay or has woken up thermal workqueue only to wait until device cools down. Changes for v4: - New patch drivers/thermal/thermal_core.c | 31 +++++++++++++++++++++++++++++++ include/linux/thermal.h | 2 ++ 2 files changed, 33 insertions(+) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d755440..12adbad 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -326,6 +327,15 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz) static void handle_non_critical_trips(struct thermal_zone_device *tz, int trip, enum thermal_trip_type trip_type) { + if (cpufreq_boost_supported()) { + tz->overheated = true; + cpufreq_boost_trigger_state(0); + if (!tz->polling_delay) { + tz->boost_polling = true; + tz->polling_delay = 1000; + } + } + if (tz->governor) tz->governor->throttle(tz, trip); } @@ -453,6 +463,27 @@ static void thermal_zone_device_check(struct work_struct *work) struct thermal_zone_device *tz = container_of(work, struct thermal_zone_device, poll_queue.work); + long trip_temp; + + if (cpufreq_boost_supported() && tz->overheated) { + tz->ops->get_trip_temp(tz, 0, &trip_temp); + /* + * Enable boost again only when current temperature is less + * than 75% of trip_temp[0] + */ + if ((tz->temperature + (trip_temp >> 2)) < trip_temp) { + tz->overheated = false; + if (tz->boost_polling) { + tz->boost_polling = false; + tz->polling_delay = 0; + monitor_thermal_zone(tz); + } + + cpufreq_boost_trigger_state(1); + return; + } + } + thermal_zone_device_update(tz); } diff --git a/include/linux/thermal.h b/include/linux/thermal.h index a386a1c..f1aa3c2 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -172,6 +172,8 @@ struct thermal_zone_device { int emul_temperature; int passive; unsigned int forced_passive; + bool overheated; + bool boost_polling; const struct thermal_zone_device_ops *ops; const struct thermal_zone_params *tzp; struct thermal_governor *governor; -- 1.7.10.4