Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Mikko Perttunen <cyndis@kapsi.fi>
To: edubezval@gmail.com, swarren@wwwdotorg.org, thierry.reding@gmail.com
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, juha-matti.tilli@iki.fi,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v6 4/4] thermal: Add Tegra SOCTHERM thermal management driver
Date: Fri, 26 Sep 2014 12:43:13 +0300
Message-ID: <1411724593-4037-5-git-send-email-cyndis@kapsi.fi> (raw)
In-Reply-To: <1411724593-4037-1-git-send-email-cyndis@kapsi.fi>

From: Mikko Perttunen <mperttunen@nvidia.com>

This adds support for the Tegra SOCTHERM thermal sensing and management
system found in the Tegra124 system-on-chip. This initial driver supports
temperature polling for four thermal zones.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
v6: fixed sparse warning for wrong order of "__iomem *"

 drivers/thermal/Kconfig          |  10 +
 drivers/thermal/Makefile         |   1 +
 drivers/thermal/tegra_soctherm.c | 471 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 482 insertions(+)
 create mode 100644 drivers/thermal/tegra_soctherm.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 693208e..fd9d049 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -175,6 +175,16 @@ config ARMADA_THERMAL
 	  Enable this option if you want to have support for thermal management
 	  controller present in Armada 370 and Armada XP SoC.
 
+config TEGRA_SOCTHERM
+	tristate "Tegra SOCTHERM thermal management"
+	depends on ARCH_TEGRA
+	help
+	  Enable this option for integrated thermal management support on NVIDIA
+	  Tegra124 systems-on-chip. The driver supports four thermal zones
+	  (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
+	  zones to manage temperatures. This option is also required for the
+	  emergency thermal reset (thermtrip) feature to function.
+
 config DB8500_CPUFREQ_COOLING
 	tristate "DB8500 cpufreq cooling"
 	depends on ARCH_U8500
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 31e232f..f0b94d5 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-$(CONFIG_ACPI_INT3403_THERMAL)	+= int3403_thermal.o
 obj-$(CONFIG_ST_THERMAL)	+= st/
+obj-$(CONFIG_TEGRA_SOCTHERM)	+= tegra_soctherm.o
diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c
new file mode 100644
index 0000000..8a8771a
--- /dev/null
+++ b/drivers/thermal/tegra_soctherm.c
@@ -0,0 +1,471 @@
+/*
+ * drivers/thermal/tegra_soctherm.c
+ *
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <soc/tegra/fuse.h>
+
+#define SENSOR_CONFIG0				0
+#define		SENSOR_CONFIG0_STOP		BIT(0)
+#define		SENSOR_CONFIG0_TALL_SHIFT	8
+#define		SENSOR_CONFIG0_TCALC_OVER	BIT(4)
+#define		SENSOR_CONFIG0_OVER		BIT(3)
+#define		SENSOR_CONFIG0_CPTR_OVER	BIT(2)
+#define SENSOR_CONFIG1				4
+#define		SENSOR_CONFIG1_TSAMPLE_SHIFT	0
+#define		SENSOR_CONFIG1_TIDDQ_EN_SHIFT	15
+#define		SENSOR_CONFIG1_TEN_COUNT_SHIFT	24
+#define		SENSOR_CONFIG1_TEMP_ENABLE	BIT(31)
+#define SENSOR_CONFIG2				8
+#define		SENSOR_CONFIG2_THERMA_SHIFT	16
+#define		SENSOR_CONFIG2_THERMB_SHIFT	0
+
+#define SENSOR_PDIV				0x1c0
+#define		SENSOR_PDIV_T124		0x8888
+#define SENSOR_HOTSPOT_OFF			0x1c4
+#define		SENSOR_HOTSPOT_OFF_T124		0x00060600
+#define SENSOR_TEMP1				0x1c8
+#define SENSOR_TEMP2				0x1cc
+
+#define SENSOR_TEMP_MASK			0xffff
+#define READBACK_VALUE_MASK			0xff00
+#define READBACK_VALUE_SHIFT			8
+#define READBACK_ADD_HALF			BIT(7)
+#define READBACK_NEGATE				BIT(1)
+
+#define FUSE_TSENSOR8_CALIB			0x180
+#define FUSE_SPARE_REALIGNMENT_REG_0		0x1fc
+
+#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK	0x1fff
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK	(0x1fff << 13)
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT	13
+
+#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK	0x3ff
+#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK	(0x7ff << 10)
+#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT	10
+
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21)
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21
+
+#define NOMINAL_CALIB_FT_T124			105
+#define NOMINAL_CALIB_CP_T124			25
+
+struct tegra_tsensor_configuration {
+	u32 tall, tsample, tiddq_en, ten_count;
+	u32 pdiv, tsample_ate, pdiv_ate;
+};
+
+struct tegra_tsensor {
+	u32 base;
+	u32 calib_fuse_offset;
+	/* Correction values used to modify values read from calibration fuses */
+	s32 fuse_corr_alpha, fuse_corr_beta;
+};
+
+struct tegra_thermctl_zone {
+	void __iomem *temp_reg;
+	int temp_shift;
+};
+
+static const struct tegra_tsensor_configuration t124_tsensor_config = {
+	.tall = 16300,
+	.tsample = 120,
+	.tiddq_en = 1,
+	.ten_count = 1,
+	.pdiv = 8,
+	.tsample_ate = 480,
+	.pdiv_ate = 8
+};
+
+static const struct tegra_tsensor t124_tsensors[] = {
+	{
+		.base = 0xc0,
+		.calib_fuse_offset = 0x098,
+		.fuse_corr_alpha = 1135400,
+		.fuse_corr_beta = -6266900,
+	},
+	{
+		.base = 0xe0,
+		.calib_fuse_offset = 0x084,
+		.fuse_corr_alpha = 1122220,
+		.fuse_corr_beta = -5700700,
+	},
+	{
+		.base = 0x100,
+		.calib_fuse_offset = 0x088,
+		.fuse_corr_alpha = 1127000,
+		.fuse_corr_beta = -6768200,
+	},
+	{
+		.base = 0x120,
+		.calib_fuse_offset = 0x12c,
+		.fuse_corr_alpha = 1110900,
+		.fuse_corr_beta = -6232000,
+	},
+	{
+		.base = 0x140,
+		.calib_fuse_offset = 0x158,
+		.fuse_corr_alpha = 1122300,
+		.fuse_corr_beta = -5936400,
+	},
+	{
+		.base = 0x160,
+		.calib_fuse_offset = 0x15c,
+		.fuse_corr_alpha = 1145700,
+		.fuse_corr_beta = -7124600,
+	},
+	{
+		.base = 0x180,
+		.calib_fuse_offset = 0x154,
+		.fuse_corr_alpha = 1120100,
+		.fuse_corr_beta = -6000500,
+	},
+	{
+		.base = 0x1a0,
+		.calib_fuse_offset = 0x160,
+		.fuse_corr_alpha = 1106500,
+		.fuse_corr_beta = -6729300,
+	},
+};
+
+struct tegra_soctherm {
+	struct reset_control *reset;
+	struct clk *clock_tsensor;
+	struct clk *clock_soctherm;
+	void __iomem *regs;
+
+	struct thermal_zone_device *thermctl_tzs[4];
+};
+
+struct tsensor_shared_calibration {
+	u32 base_cp, base_ft;
+	u32 actual_temp_cp, actual_temp_ft;
+};
+
+static int calculate_shared_calibration(struct tsensor_shared_calibration *r)
+{
+	u32 val;
+	u32 shifted_cp, shifted_ft;
+	int err;
+
+	err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val);
+	if (err)
+		return err;
+	r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK;
+	r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK)
+		>> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT;
+	val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK)
+		>> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT);
+	shifted_ft = sign_extend32(val, 4);
+
+	err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val);
+	if (err)
+		return err;
+	shifted_cp = sign_extend32(val, 5);
+
+	r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp;
+	r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft;
+
+	return 0;
+}
+
+static s64 div64_s64_precise(s64 a, s64 b)
+{
+	s64 r, al;
+
+	/* Scale up for increased precision division */
+	al = a << 16;
+
+	r = div64_s64(al * 2 + 1, 2 * b);
+	return r >> 16;
+}
+
+static int calculate_tsensor_calibration(
+	const struct tegra_tsensor *sensor,
+	struct tsensor_shared_calibration shared,
+	u32 *calib
+)
+{
+	u32 val;
+	s32 actual_tsensor_ft, actual_tsensor_cp;
+	s32 delta_sens, delta_temp;
+	s32 mult, div;
+	s16 therma, thermb;
+	int err;
+
+	err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
+	if (err)
+		return err;
+
+	actual_tsensor_cp = (shared.base_cp * 64) + sign_extend32(val, 12);
+	val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK)
+		>> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
+	actual_tsensor_ft = (shared.base_ft * 32) + sign_extend32(val, 12);
+
+	delta_sens = actual_tsensor_ft - actual_tsensor_cp;
+	delta_temp = shared.actual_temp_ft - shared.actual_temp_cp;
+
+	mult = t124_tsensor_config.pdiv * t124_tsensor_config.tsample_ate;
+	div = t124_tsensor_config.tsample * t124_tsensor_config.pdiv_ate;
+
+	therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
+		(s64) delta_sens * div);
+	thermb = div64_s64_precise(
+		((s64) actual_tsensor_ft * shared.actual_temp_cp) -
+		((s64) actual_tsensor_cp * shared.actual_temp_ft),
+		(s64) delta_sens);
+
+	therma = div64_s64_precise((s64) therma * sensor->fuse_corr_alpha,
+		(s64) 1000000LL);
+	thermb = div64_s64_precise((s64) thermb * sensor->fuse_corr_alpha +
+		sensor->fuse_corr_beta,
+		(s64) 1000000LL);
+
+	*calib = ((u16)(therma) << SENSOR_CONFIG2_THERMA_SHIFT) |
+		((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
+
+	return 0;
+}
+
+static int enable_tsensor(struct tegra_soctherm *tegra,
+			  const struct tegra_tsensor *sensor,
+			  struct tsensor_shared_calibration shared)
+{
+	void __iomem *base = tegra->regs + sensor->base;
+	unsigned int val;
+	u32 calib;
+	int err;
+
+	err = calculate_tsensor_calibration(sensor, shared, &calib);
+	if (err)
+		return err;
+
+	val = 0;
+	val |= t124_tsensor_config.tall << SENSOR_CONFIG0_TALL_SHIFT;
+	writel(val, base + SENSOR_CONFIG0);
+
+	val = 0;
+	val |= (t124_tsensor_config.tsample - 1) <<
+		SENSOR_CONFIG1_TSAMPLE_SHIFT;
+	val |= t124_tsensor_config.tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
+	val |= t124_tsensor_config.ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
+	val |= SENSOR_CONFIG1_TEMP_ENABLE;
+	writel(val, base + SENSOR_CONFIG1);
+
+	writel(calib, base + SENSOR_CONFIG2);
+
+	return 0;
+}
+
+/* Translate from soctherm readback format to millicelsius.
+ * The soctherm readback format in bits is as follows:
+ *   TTTTTTTT H______N
+ * where T's contain the temperature in Celsius,
+ * H denotes an addition of 0.5 Celsius and N denotes negation
+ * of the final value.
+ */
+static inline long translate_temp(u16 val)
+{
+	long t;
+
+	t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
+	if (val & READBACK_ADD_HALF)
+		t += 500;
+	if (val & READBACK_NEGATE)
+		t *= -1;
+
+	return t;
+}
+
+static int tegra_thermctl_get_temp(void *data, long *out_temp)
+{
+	struct tegra_thermctl_zone *zone = data;
+	u32 val;
+
+	val = (readl(zone->temp_reg) >> zone->temp_shift) & SENSOR_TEMP_MASK;
+	*out_temp = translate_temp(val);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_soctherm_of_match[] = {
+	{ .compatible = "nvidia,tegra124-soctherm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
+
+static const int thermctl_temp_offsets[] = {
+	SENSOR_TEMP1, SENSOR_TEMP2, SENSOR_TEMP1, SENSOR_TEMP2
+};
+
+static const int thermctl_temp_shifts[] = {
+	16, 16, 0, 0
+};
+
+static int tegra_soctherm_probe(struct platform_device *pdev)
+{
+	struct tegra_soctherm *tegra;
+	struct thermal_zone_device *tz;
+	struct tsensor_shared_calibration shared_calib;
+	int i;
+	int err = 0;
+
+	const struct tegra_tsensor *tsensors = t124_tsensors;
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	tegra->regs = devm_ioremap_resource(&pdev->dev,
+		platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(tegra->regs)) {
+		dev_err(&pdev->dev, "can't get registers");
+		return PTR_ERR(tegra->regs);
+	}
+
+	tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
+	if (IS_ERR(tegra->reset)) {
+		dev_err(&pdev->dev, "can't get soctherm reset\n");
+		return PTR_ERR(tegra->reset);
+	}
+
+	tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
+	if (IS_ERR(tegra->clock_tsensor)) {
+		dev_err(&pdev->dev, "can't get clock tsensor\n");
+		return PTR_ERR(tegra->clock_tsensor);
+	}
+
+	tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
+	if (IS_ERR(tegra->clock_soctherm)) {
+		dev_err(&pdev->dev, "can't get clock soctherm\n");
+		return PTR_ERR(tegra->clock_soctherm);
+	}
+
+	reset_control_assert(tegra->reset);
+
+	err = clk_prepare_enable(tegra->clock_soctherm);
+	if (err) {
+		reset_control_deassert(tegra->reset);
+		return err;
+	}
+
+	err = clk_prepare_enable(tegra->clock_tsensor);
+	if (err) {
+		clk_disable_unprepare(tegra->clock_soctherm);
+		reset_control_deassert(tegra->reset);
+		return err;
+	}
+
+	reset_control_deassert(tegra->reset);
+
+	/* Initialize raw sensors */
+
+	err = calculate_shared_calibration(&shared_calib);
+	if (err)
+		goto disable_clocks;
+
+	for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) {
+		err = enable_tsensor(tegra, tsensors + i, shared_calib);
+		if (err)
+			goto disable_clocks;
+	}
+
+	writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
+	writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+	/* Initialize thermctl sensors */
+
+	for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
+		struct tegra_thermctl_zone *zone =
+			devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone) {
+			err = -ENOMEM;
+			--i;
+			goto unregister_tzs;
+		}
+
+		zone->temp_reg = tegra->regs + thermctl_temp_offsets[i];
+		zone->temp_shift = thermctl_temp_shifts[i];
+
+		tz = thermal_zone_of_sensor_register(
+			&pdev->dev, i, zone, tegra_thermctl_get_temp, NULL);
+		if (IS_ERR(tz)) {
+			err = PTR_ERR(tz);
+			dev_err(&pdev->dev, "failed to register sensor: %d\n",
+				err);
+			--i;
+			goto unregister_tzs;
+		}
+
+		tegra->thermctl_tzs[i] = tz;
+	}
+
+	return 0;
+
+unregister_tzs:
+	for (; i >= 0; i--)
+		thermal_zone_of_sensor_unregister(&pdev->dev,
+						  tegra->thermctl_tzs[i]);
+
+disable_clocks:
+	clk_disable_unprepare(tegra->clock_tsensor);
+	clk_disable_unprepare(tegra->clock_soctherm);
+
+	return err;
+}
+
+static int tegra_soctherm_remove(struct platform_device *pdev)
+{
+	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
+		thermal_zone_of_sensor_unregister(&pdev->dev,
+						  tegra->thermctl_tzs[i]);
+	}
+
+	clk_disable_unprepare(tegra->clock_tsensor);
+	clk_disable_unprepare(tegra->clock_soctherm);
+
+	return 0;
+}
+
+static struct platform_driver tegra_soctherm_driver = {
+	.probe = tegra_soctherm_probe,
+	.remove = tegra_soctherm_remove,
+	.driver = {
+		.name = "tegra_soctherm",
+		.of_match_table = tegra_soctherm_of_match,
+	},
+};
+module_platform_driver(tegra_soctherm_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("Tegra SOCTHERM thermal management driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0

  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-26  9:43 [PATCH v6 0/4] Tegra124 soctherm driver Mikko Perttunen
     [not found] ` <1411724593-4037-1-git-send-email-cyndis-/1wQRMveznE@public.gmane.org>
2014-09-26  9:43   ` [PATCH v6 1/4] of: Add bindings for nvidia,tegra124-soctherm Mikko Perttunen
2014-09-26  9:43 ` [PATCH v6 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen
2014-09-26  9:43 ` [PATCH v6 3/4] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen
2014-09-26  9:43 ` Mikko Perttunen [this message]
2014-09-26 11:45   ` [PATCH v6 4/4] thermal: Add Tegra SOCTHERM thermal management driver Thierry Reding
2014-09-26 20:28     ` Mikko Perttunen
2014-09-27 12:06       ` Juha-Matti Tilli
     [not found]         ` <20140927120649.GA70809-Xv4IVSKz7SWQi9Q/X01l6/UpdFzICT1y@public.gmane.org>
2014-09-29 13:42           ` Mikko Perttunen
2014-09-29  8:14       ` Peter De Schrijver
     [not found]       ` <5425CC6F.2020309-/1wQRMveznE@public.gmane.org>
2014-09-29  8:29         ` Thierry Reding
2014-09-29 13:37           ` Mikko Perttunen
2014-09-29 14:17   ` [PATCH v7 " Mikko Perttunen
2014-10-15 10:05     ` Mikko Perttunen
     [not found]       ` <543E46DF.8060705-/1wQRMveznE@public.gmane.org>
2014-11-07 15:54         ` Eduardo Valentin
2014-11-08  1:11           ` Mikko Perttunen
2014-09-26 10:19 ` [PATCH v6 0/4] Tegra124 soctherm driver Thierry Reding
2014-09-26 10:22   ` Mikko Perttunen
     [not found]     ` <54253E7C.9080704-/1wQRMveznE@public.gmane.org>
2014-09-26 11:48       ` Thierry Reding
2014-09-26 12:00         ` Mikko Perttunen
     [not found]           ` <5425554B.7060102-/1wQRMveznE@public.gmane.org>
2014-09-26 12:05             ` Thierry Reding
2014-09-26 12:09               ` Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411724593-4037-5-git-send-email-cyndis@kapsi.fi \
    --to=cyndis@kapsi.fi \
    --cc=edubezval@gmail.com \
    --cc=juha-matti.tilli@iki.fi \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mperttunen@nvidia.com \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git