From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michel Pollet Subject: [PATCH v3 7/8] DT: arm: Add Renesas RZN1D-DB Board base file Date: Thu, 29 Mar 2018 08:47:03 +0100 Message-ID: <1522309629-10152-8-git-send-email-michel.pollet@bp.renesas.com> References: <1522309629-10152-1-git-send-email-michel.pollet@bp.renesas.com> Return-path: In-Reply-To: <1522309629-10152-1-git-send-email-michel.pollet@bp.renesas.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-renesas-soc@vger.kernel.org, Simon Horman Cc: phil.edworthy@renesas.com, Michel Pollet , Michel Pollet , Magnus Damm , Rob Herring , Mark Rutland , Lee Jones , Russell King , Sebastian Reichel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org List-Id: linux-pm@vger.kernel.org This adds a base device tree file for the RZN1-DB board, with only the basic support allowing the system to boot to a prompt. Only one UART is used, with only a single CPU running. Signed-off-by: Michel Pollet --- arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts new file mode 100644 index 0000000..a462b1a --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include "r9a06g0xx.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032", "renesas,rzn1"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + aliases { + serial0 = &uart0; + }; +}; +&uart0 { + status = "okay"; +}; -- 2.7.4