[PATCH v2 0/8] Add Mediatek thermal dirver and dtsi

[michael.kao <michael.kao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]

This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.

This patch series base on these patches [1][2][3][4].

[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)

Matthias Kaehlcke (2):
	arm64: dts: mt8183: Configure CPU cooling
	arm64: dts: mt8183: Increase polling frequency for CPU thermal zone

Michael Kao (6):
	arm64: dts: mt8183: add thermal zone node
	arm64: dts: mt8183: add/update dynamic power coefficients
	arm64: dts: mt8183: Add #cooling-cells to CPU nodes
	thermal: mediatek: mt8183: fix bank number settings
	thermal: mediatek: add another get_temp ops for thermal sensors
	thermal: mediatek: use spinlock to protect PTPCORESEL

arch/arm64/boot/dts/mediatek/mt8183.dtsi | 158 +++++++++++++++++++++++++++++++
drivers/thermal/mtk_thermal.c            |  82 +++++++++++++---
2 files changed, 226 insertions(+), 14 deletions(-)