linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sowjanya Komatineni <skomatineni@nvidia.com>
To: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<tglx@linutronix.de>, <jason@lakedaemon.net>,
	<marc.zyngier@arm.com>, <linus.walleij@linaro.org>,
	<stefan@agner.ch>, <mark.rutland@arm.com>
Cc: <pdeschrijver@nvidia.com>, <pgaikwad@nvidia.com>,
	<sboyd@kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>, <jckuo@nvidia.com>,
	<josephl@nvidia.com>, <talho@nvidia.com>,
	<skomatineni@nvidia.com>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <mperttunen@nvidia.com>,
	<spatra@nvidia.com>, <robh+dt@kernel.org>, <digetx@gmail.com>,
	<devicetree@vger.kernel.org>, <rjw@rjwysocki.net>,
	<viresh.kumar@linaro.org>, <linux-pm@vger.kernel.org>
Subject: [PATCH v7 08/20] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
Date: Wed, 31 Jul 2019 14:10:51 -0700	[thread overview]
Message-ID: <1564607463-28802-9-git-send-email-skomatineni@nvidia.com> (raw)
In-Reply-To: <1564607463-28802-1-git-send-email-skomatineni@nvidia.com>

This patch has a fix to enable PLLP branches to CPU before changing
the CPU clusters clock source to PLLP for Gen5 Super clock and
disables PLLP branches to CPU when not in use.

During system suspend entry and exit, CPU source will be switched
to PLLP and this needs PLLP branches to be enabled to CPU prior to
the switch.

On system resume, warmboot code enables PLLP branches to CPU and
powers up the CPU with PLLP clock source.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/clk/tegra/clk-super.c            | 14 ++++++++++++++
 drivers/clk/tegra/clk-tegra-super-gen4.c |  2 +-
 drivers/clk/tegra/clk.c                  | 14 ++++++++++++++
 drivers/clk/tegra/clk.h                  |  5 +++++
 4 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
index 39ef31b46df5..e2a1e95a8db7 100644
--- a/drivers/clk/tegra/clk-super.c
+++ b/drivers/clk/tegra/clk-super.c
@@ -28,6 +28,9 @@
 #define super_state_to_src_shift(m, s) ((m->width * s))
 #define super_state_to_src_mask(m) (((1 << m->width) - 1))
 
+#define CCLK_SRC_PLLP_OUT0 4
+#define CCLK_SRC_PLLP_OUT4 5
+
 static u8 clk_super_get_parent(struct clk_hw *hw)
 {
 	struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
@@ -97,12 +100,23 @@ static int clk_super_set_parent(struct clk_hw *hw, u8 index)
 		if (index == mux->div2_index)
 			index = mux->pllx_index;
 	}
+
+	/* enable PLLP branches to CPU before selecting PLLP source */
+	if ((mux->flags & TEGRA210_CPU_CLK) &&
+	    (index == CCLK_SRC_PLLP_OUT0 || index == CCLK_SRC_PLLP_OUT4))
+		tegra_clk_set_pllp_out_cpu(true);
+
 	val &= ~((super_state_to_src_mask(mux)) << shift);
 	val |= (index & (super_state_to_src_mask(mux))) << shift;
 
 	writel_relaxed(val, mux->reg);
 	udelay(2);
 
+	/* disable PLLP branches to CPU if not used */
+	if ((mux->flags & TEGRA210_CPU_CLK) &&
+	    index != CCLK_SRC_PLLP_OUT0 && index != CCLK_SRC_PLLP_OUT4)
+		tegra_clk_set_pllp_out_cpu(false);
+
 out:
 	if (mux->lock)
 		spin_unlock_irqrestore(mux->lock, flags);
diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
index cdfe7c9697e1..888d76b01c75 100644
--- a/drivers/clk/tegra/clk-tegra-super-gen4.c
+++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
@@ -180,7 +180,7 @@ static void __init tegra_super_clk_init(void __iomem *clk_base,
 					gen_info->num_cclk_g_parents,
 					CLK_SET_RATE_PARENT,
 					clk_base + CCLKG_BURST_POLICY,
-					0, 4, 8, 0, NULL);
+					TEGRA210_CPU_CLK, 4, 8, 0, NULL);
 		} else {
 			clk = tegra_clk_register_super_mux("cclk_g",
 					gen_info->cclk_g_parents,
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index 573e3c967ae1..eb08047fd02f 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -23,6 +23,7 @@
 #define CLK_OUT_ENB_W			0x364
 #define CLK_OUT_ENB_X			0x280
 #define CLK_OUT_ENB_Y			0x298
+#define CLK_ENB_PLLP_OUT_CPU		BIT(31)
 #define CLK_OUT_ENB_SET_L		0x320
 #define CLK_OUT_ENB_CLR_L		0x324
 #define CLK_OUT_ENB_SET_H		0x328
@@ -199,6 +200,19 @@ const struct tegra_clk_periph_regs *get_reg_bank(int clkid)
 	}
 }
 
+void tegra_clk_set_pllp_out_cpu(bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + CLK_OUT_ENB_Y);
+	if (enable)
+		val |= CLK_ENB_PLLP_OUT_CPU;
+	else
+		val &= ~CLK_ENB_PLLP_OUT_CPU;
+
+	writel_relaxed(val, clk_base + CLK_OUT_ENB_Y);
+}
+
 struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
 {
 	clk_base = regs;
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index d61e61eebf4a..f8de447f505b 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -687,6 +687,9 @@ struct clk *tegra_clk_register_periph_data(void __iomem *clk_base,
  * Flags:
  * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
  *     that this is LP cluster clock.
+ * TEGRA210_CPU_CLK - This flag indicates this is CPU cluster clock. To use
+ * PLLP for CPU clock source, need to enable PLLP branches to CPU by setting
+ * additional bit PLLP_OUT_CPU for gen5 super clock.
  */
 struct tegra_clk_super_mux {
 	struct clk_hw	hw;
@@ -703,6 +706,7 @@ struct tegra_clk_super_mux {
 #define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
 
 #define TEGRA_DIVIDER_2 BIT(0)
+#define TEGRA210_CPU_CLK BIT(1)
 
 extern const struct clk_ops tegra_clk_super_ops;
 struct clk *tegra_clk_register_super_mux(const char *name,
@@ -849,6 +853,7 @@ int tegra_pll_p_div_to_hw(struct tegra_clk_pll *pll, u8 p_div);
 int div_frac_get(unsigned long rate, unsigned parent_rate, u8 width,
 		 u8 frac_width, u8 flags);
 void tegra_clk_osc_resume(void __iomem *clk_base);
+void tegra_clk_set_pllp_out_cpu(bool enable);
 
 
 /* Combined read fence with delay */
-- 
2.7.4


  parent reply	other threads:[~2019-07-31 21:12 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31 21:10 [PATCH v7 00/20] SC7 entry and exit support for Tegra210 Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 01/20] pinctrl: tegra: Add suspend and resume support Sowjanya Komatineni
2019-08-05  9:20   ` Linus Walleij
2019-08-06 21:51     ` Sowjanya Komatineni
2019-08-07  3:40       ` Sowjanya Komatineni
2019-08-07 13:11         ` Linus Walleij
2019-08-05 10:50   ` Dmitry Osipenko
2019-08-05 18:06     ` Sowjanya Komatineni
2019-08-06 17:59       ` Dmitry Osipenko
2019-08-06 21:54         ` Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 02/20] pinctrl: tegra210: Add Tegra210 pinctrl pm ops Sowjanya Komatineni
2019-08-05  9:21   ` Linus Walleij
2019-07-31 21:10 ` [PATCH v7 03/20] clk: tegra: divider: Save and restore divider rate Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 04/20] clk: tegra: pllout: Save and restore pllout context Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 05/20] clk: tegra: pll: Save and restore pll context Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 06/20] clk: tegra: Support for OSC context save and restore Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 07/20] clk: tegra: clk-periph: Add save and restore support Sowjanya Komatineni
2019-07-31 21:10 ` Sowjanya Komatineni [this message]
2019-07-31 21:10 ` [PATCH v7 09/20] clk: tegra: clk-super: " Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 10/20] clk: tegra: clk-dfll: Add suspend and resume support Sowjanya Komatineni
2019-08-01 10:18   ` Dmitry Osipenko
2019-08-01 10:37     ` Dmitry Osipenko
     [not found]       ` <BYAPR12MB3398C388471BC5811614C8FEC2DE0@BYAPR12MB3398.namprd12.prod.outlook.com>
2019-08-01 17:10         ` Dmitry Osipenko
2019-08-01 17:53           ` Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 11/20] cpufreq: tegra124: " Sowjanya Komatineni
2019-08-01  5:40   ` Viresh Kumar
2019-08-01 17:51     ` Sowjanya Komatineni
2019-08-02  3:41   ` Viresh Kumar
2019-07-31 21:10 ` [PATCH v7 12/20] clk: tegra210: Use fence_udelay during PLLU init Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 13/20] clk: tegra210: Add suspend and resume support Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 14/20] soc/tegra: pmc: Allow to support more tegras wake Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 15/20] soc/tegra: pmc: Add pmc wake support for tegra210 Sowjanya Komatineni
2019-07-31 21:10 ` [PATCH v7 16/20] arm64: tegra: Enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-07-31 21:11 ` [PATCH v7 17/20] soc/tegra: pmc: Configure core power request polarity Sowjanya Komatineni
2019-07-31 21:11 ` [PATCH v7 18/20] soc/tegra: pmc: Configure deep sleep control settings Sowjanya Komatineni
2019-07-31 21:11 ` [PATCH v7 19/20] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings Sowjanya Komatineni
2019-07-31 21:11 ` [PATCH v7 20/20] arm64: dts: tegra210-p3450: Jetson Nano " Sowjanya Komatineni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1564607463-28802-9-git-send-email-skomatineni@nvidia.com \
    --to=skomatineni@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=spatra@nvidia.com \
    --cc=stefan@agner.ch \
    --cc=talho@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).