Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, mturquette@baylibre.com, sboyd@kernel.org,
	rjw@rjwysocki.net, viresh.kumar@linaro.org,
	leonard.crestez@nxp.com, abel.vesa@nxp.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-pm@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH RESEND V2 7/7] arm64: dts: imx8mn: Add cpu-freq support
Date: Sun, 18 Aug 2019 02:32:25 -0400
Message-ID: <1566109945-11149-7-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1566109945-11149-1-git-send-email-Anson.Huang@nxp.com>

Add A53 OPP table, cpu regulator and speed grading node to
support cpu-freq driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts |  4 +++
 arch/arm64/boot/dts/freescale/imx8mn.dtsi         | 41 +++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 10ebf77..11c705d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -27,6 +27,10 @@
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 1d8899b..785f4c4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -51,6 +51,9 @@
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		A53_1: cpu@1 {
@@ -61,6 +64,7 @@
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
 		};
 
 		A53_2: cpu@2 {
@@ -71,6 +75,7 @@
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
 		};
 
 		A53_3: cpu@3 {
@@ -81,6 +86,7 @@
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -88,6 +94,35 @@
 		};
 	};
 
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xb00>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x300>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x100>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
@@ -288,6 +323,12 @@
 				compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			anatop: anatop@30360000 {
-- 
2.7.4


  parent reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-18  6:32 [PATCH RESEND V2 1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support Anson Huang
2019-08-18  6:32 ` [PATCH RESEND V2 2/7] arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support Anson Huang
2019-08-19 13:36   ` Shawn Guo
2019-08-18  6:32 ` [PATCH RESEND V2 3/7] cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading Anson Huang
2019-08-19  8:37   ` Viresh Kumar
2019-08-18  6:32 ` [PATCH RESEND V2 4/7] cpufreq: imx-cpufreq-dt: Add i.MX8MN support Anson Huang
2019-08-19  8:37   ` Viresh Kumar
2019-08-18  6:32 ` [PATCH RESEND V2 5/7] clk: imx8mn: Add missing rate_count assignment for each PLL structure Anson Huang
2019-08-19 13:38   ` Shawn Guo
2019-08-18  6:32 ` [PATCH RESEND V2 6/7] clk: imx8mn: Add necessary frequency support for ARM PLL table Anson Huang
2019-08-19 13:39   ` Shawn Guo
2019-08-18  6:32 ` Anson Huang [this message]
2019-08-19 13:40   ` [PATCH RESEND V2 7/7] arm64: dts: imx8mn: Add cpu-freq support Shawn Guo
2019-08-19 13:35 ` [PATCH RESEND V2 1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support Shawn Guo

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566109945-11149-7-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox