linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <linux@armlinux.org.uk>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <sre@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: [PATCH v3 9/9] ARM: at91/defconfig: enable config flags for sam9x60 SoC
Date: Fri, 29 Nov 2019 15:51:45 +0200	[thread overview]
Message-ID: <1575035505-6310-10-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1575035505-6310-1-git-send-email-claudiu.beznea@microchip.com>

Enable config flags for SAM9X60 SoC. This includes SoC flag
(CONFIG_SOC_SAM9X60) and IP/board specific flags as follows:
- atmel maxtouch
- flexcom
- XDMA
- I2S Multi-channel
- mikroelectronica proto board
- SAMA5D2's ADC
- atmel QSPI
- classd

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 arch/arm/configs/at91_dt_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 148f753de6c7..5c5df8bc0074 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -13,6 +13,7 @@ CONFIG_ARCH_MULTI_V5=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
+CONFIG_SOC_SAM9X60=y
 # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -49,6 +50,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -99,6 +101,7 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
@@ -108,11 +111,14 @@ CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
 CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -136,6 +142,9 @@ CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
 CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
@@ -167,9 +176,11 @@ CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_HLCDC_PWM=y
-- 
2.7.4


  parent reply	other threads:[~2019-11-29 13:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29 13:51 [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 1/9] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 2/9] ARM: at91: Kconfig: add config flag for SAM9X60 SoC Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 3/9] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 4/9] drivers: soc: atmel: move sam9x60 under its own " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 5/9] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 6/9] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 7/9] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 8/9] ARM: at91/defconfig: use savedefconfig Claudiu Beznea
2019-11-29 13:51 ` Claudiu Beznea [this message]
2019-12-09 23:45 ` [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575035505-6310-10-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=codrin.ciubotariu@microchip.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sre@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).